Is the M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone compatible with my hydraulic oil (mineral oil) and NBR seals at -20Â°C?

Yes . the M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone is compatible with your hydraulic oil (mineral oil) and NBR seals at â20Â°C. Justification: - The product is intended for hydraulic oil and mineral oils and uses NBR seals. - The specified operating temperature range includes â20Â°C: overall range is â30Â°C to +120Â°C (and â30Â°C to +100Â°C when using the plastic cap), so â20Â°C lies well within both ranges. - Construction materials (steel with zinc-nickel coating) and available series/types support typical hydraulic pressures and installations per ISO 15171-2 and DIN 2353. If you plan to use the plastic cap, note its maximum rated temperature is +100Â°C (still acceptable for â20Â°C). If you have extreme low-temperature cycling or very slow-moving hydraulic fluid, consider validating seal hardness and dynamic performance for your specific application.

Can the M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone handle pressures up to 630 bar in hydraulic systems?

Yes. The M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone is designed for hydraulic systems and, depending on the series/type, its working pressure range covers up to 630 bar. Ensure you choose the appropriate L (light) or S (heavy) variant and type A or B nut rated for the required pressure; also note temperature limits (â30Â°C to +120Â°C, or up to +100Â°C with a plastic cap).

Does the M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone accept use in lubrication and venting applications?

Yes. The M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24Â° cone can be used in lubrication and venting applications. It is designed per ISO 15171-2 primarily for hydraulic pressure diagnostics but is also specified for use in lubrication systems, venting, oil sampling, and micro-hydraulics. It is intended for hydraulic oil and mineral oils, constructed from carbon steel with zincânickel coating, uses NBR seals, and is available with either a metal or plastic cap. Operating conditions: working pressures from 100 to 630 bar (type-dependent) and temperatures from â30Â°C to +120Â°C (â30Â°C to +100Â°C if using the plastic cap).

M16x2 measuring connection with metal or plastic cap and DIN 2353 connector, 24° cone

All products, Measurement couplings/

Additional information

Material	CS – steel (cast iron)

The measurement coupling is designed according to the requirements of the ISO 15171-2 standard. Primarily used for pressure diagnostics in hydraulic systems, it can also be used for lubrication systems, venting, oil sampling, and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals. Available in versions with a metal cap or a plastic cap. The coupling features a standard ISO 15171-2 thread M16x2 on the measurement end, and an appropriate connection for hydraulic installation according to DIN 2353, 24° cone, o-ring. It is available as: L (light series) and S (heavy series), with a type A wire nut or a type B threaded nut. Material: steel with a zinc-nickel coating. Working pressure: from 100 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-620-02-006-60	Measurement connector M16x2, accessory GW M12x1.5, 06L, plastic cap	-	250	In stock	Enquiry
PS-620-02-006-61	Measurement connector M16x2, accessory GW M12x1.5, 06L, metal plug	-	250	In stock	Enquiry
PS-620-02-008-60	Measurement connector M16x2, accessory GW M14x1.5, 08L, plastic cap	-	250	In stock	Enquiry
PS-620-02-008-61	Measurement connector M16x2, accessory GW M14x1.5, 08L, metal plug	-	250	In stock	Enquiry
PS-620-02-010-60	Measurement connector M16x2, accessory GW M16x1.5, 10L, plastic cap	-	250	In stock	Enquiry
PS-620-02-010-61	Measurement connector M16x2, accessory GW M16x1.5, 10L, metal plug	-	250	In stock	Enquiry
PS-620-02-012-60	Measurement connector M16x2, accessory GW M18x1.5, 12L, plastic cap	-	250	In stock	Enquiry
PS-620-02-012-61	Measurement connector M16x2, accessory GW M18x1.5, 12L, metal plug	-	250	In stock	Enquiry
PS-620-02-015-60	Measurement connector M16x2, accessory GW M22x1.5, 15L, plastic cap	-	250	In stock	Enquiry
PS-620-02-015-61	Measurement connector M16x2, accessory GW M22x1.5, 15L, metal plug	-	250	In stock	Enquiry
PS-620-02-018-60	Measurement connector M16x2, accessory GW M26x1.5, 18L, plastic cap	-	160	In stock	Enquiry
PS-620-02-018-61	Measurement connector M16x2, accessory GW M26x1.5, 18L, metal plug	-	160	In stock	Enquiry
PS-620-02-022-60	Measurement connector M16x2, accessory GW M30x2, 22L, plastic plug	-	160	In stock	Enquiry
PS-620-02-022-61	Measurement connector M16x2, accessory GW M30x2, 22L, metal plug	-	160	In stock	Enquiry
PS-620-02-028-60	Measurement connector M16x2, accessory GW M36x2, 28L, plastic plug	-	250	In stock	Enquiry
PS-620-02-028-61	Measurement connector M16x2, accessory GW M36x2, 28L, metal plug	-	250	In stock	Enquiry
PS-620-02-035-60	Measurement connector M16x2, accessory GW M45x2, 35L, plastic cap	-	250	In stock	Enquiry
PS-620-02-035-61	Measurement connector M16x2, accessory GW M45x2, 35L, metal plug	-	250	In stock	Enquiry
PS-620-02-042-60	Measurement connector M16x2, accessory GW M52x2, 42L, plastic plug	-	250	In stock	Enquiry
PS-620-02-042-61	Measurement connector M16x2, accessory GW M52x2, 42L, metal plug	-	250	In stock	Enquiry
PS-620-02-106-60	Measurement connector M16x2, accessory GW M14x1.5, 06S, plastic cap	-	630	In stock	Enquiry
PS-620-02-106-61	Measurement connector M16x2, accessory GW M14x1.5, 06S, metal plug	-	630	In stock	Enquiry
PS-620-02-108-60	Measurement connector M16x2, accessory GW M16x1.5, 08S, plastic cap	-	630	In stock	Enquiry
PS-620-02-108-61	Measurement connector M16x2, accessory GW M16x1.5, 08S, metal plug	-	630	In stock	Enquiry
PS-620-02-110-60	Measurement connector M16x2, accessory GW M18x1.5, 10S, plastic cap	-	630	In stock	Enquiry
PS-620-02-110-61	Measurement connector M16x2, accessory GW M18x1.5, 10S, metal plug	-	630	In stock	Enquiry
PS-620-02-112-60	Measurement connector M16x2, accessory GW M20x1.5, 12S, plastic cap	-	630	In stock	Enquiry
PS-620-02-112-61	Measurement connector M16x2, accessory GW M20x1.5, 12S, metal plug	-	630	In stock	Enquiry
PS-620-02-114-60	Measurement connector M16x2, accessory GW M22x1.5, 14S, plastic cap	-	630	In stock	Enquiry
PS-620-02-114-61	Measurement connector M16x2, accessory GW M22x1.5, 14S, metal plug	-	630	In stock	Enquiry
PS-620-02-116-60	Measurement connector M16x2, accessory GW M24x1.5, 16S, plastic cap	-	400	In stock	Enquiry
PS-620-02-116-61	Measurement connector M16x2, accessory GW M24x1.5, 16S, metal plug	-	400	In stock	Enquiry
PS-620-02-120-60	Measurement connector M16x2, accessory GW M30x2, 20S, plastic cap	-	400	In stock	Enquiry
PS-620-02-120-61	Measurement connector M16x2, accessory GW M30x2, 20S, metal plug	-	400	In stock	Enquiry
PS-620-02-125-60	Measurement connector M16x2, accessory GW M36x2, 25S, plastic cap	-	400	In stock	Enquiry
PS-620-02-125-61	Measurement connector M16x2, accessory GW M36x2, 25S, metal plug	-	400	In stock	Enquiry
PS-620-02-130-60	Measurement connector M16x2, accessory GW M42x2, 30S, plastic cap	-	250	In stock	Enquiry
PS-620-02-130-61	Measurement connector M16x2, accessory GW M42x2, 30S, metal plug	-	250	In stock	Enquiry
PS-620-02-138-60	Measurement connector M16x2, accessory GW M52x2, 38S, plastic cap	-	250	In stock	Enquiry
PS-620-02-138-61	Measurement connector M16x2, accessory GW M52x2, 38S, metal plug	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The measurement coupling is designed according to the requirements of the ISO 15171-2 standard. Primarily used for pressure diagnostics in hydraulic systems, it can also be used for lubrication systems, venting, oil sampling, and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals. Available in versions with a metal cap or a plastic cap. The coupling features a standard ISO 15171-2 thread M16x2 on the measurement end, and an appropriate connection for hydraulic installation according to DIN 2353, 24° cone, o-ring. It is available as: L (light series) and S (heavy series), with a type A wire nut or a type B threaded nut. Material: steel with a zinc-nickel coating. Working pressure: from 100 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).