Can the Compressed air pen with rubber cap, aluminum safely operate at 6 bar without damaging delicate surfaces?

Yes . the Compressed air pen with rubber cap, aluminum can safely operate at 6 bar without damaging delicate surfaces, provided it is used correctly. Why: - The productâs specified operating pressure range is 1â6 bar, so 6 bar is within intended use. - It has a rubber tip designed to protect surfaces from scratching. - The nozzle allows one-handed flow adjustment from a narrow to a wide air stream, so you can reduce point pressure by widening the jet or throttling the flow. - Nominal flow at 6 bar is 300 l/min; high flow can still cause forceful impact, so technique matters. Safety recommendations: - Start with a wider air stream and lower flow, test on a hidden area first. - Keep the nozzle at a moderate distance (several centimeters) from the surface to reduce direct force. - Avoid using the narrow, concentrated jet at full flow on very fragile or thin materials. - Use lower pressures when cleaning extremely delicate surfaces despite the 6 bar capability. In summary: Compressed air pen with rubber cap, aluminum is rated for 6 bar and includes protective design features, but use adjustable flow, distance, and caution to avoid damage to particularly delicate materials.

How do I adjust the airflow on the Compressed air pen with rubber cap, aluminum for delicate surfaces?

To adjust the airflow on the Compressed air pen with rubber cap, aluminum for delicate surfaces, use the one-handed nozzle control: rotate or slide the nozzle to vary the orifice from very narrow up to 3 mm for a wider stream. Start at a low operating pressure (1â2 bar) and set the nozzle to the narrow end for the gentlest, more focused air. If you need broader coverage, open the nozzle gradually while monitoring surface reaction. Keep pressure within the recommended 1â6 bar (nominal 300 l/min at 6 bar) and avoid exceeding 12 bar. The rubber tip protects against scratching-maintain a safe distance and test on a small area before full use.

Is the Compressed air pen with rubber cap, aluminum suitable for use in cold environments down to -10Â°C?

Yes. The Compressed air pen with rubber cap, aluminum is specified for an operating temperature range from â10Â°C to +60Â°C, so it is suitable for use in cold environments down to â10Â°C. Ensure seals (NBR) and any connected fittings are also rated for that temperature and follow safe operating pressure limits (1â6 bar typical, max 12 bar).

Feather for compressed air with rubber a nozzle, aluminum

Air guns, All products/

Additional information

Handy Feather for compressed air, intended for fast removing with surfaces all contamination: liquids, fine chips, filings itp. made with anodized aluminum. equipped in nozzle with the possibility regulating flow one hand – od narrow for wide stream air. rubber a nozzle na the tip feather protects surfaces against scratching. terminated a plug EUROSTANDARD 7.2. Material: housing – aluminum protected method anodized; sealing – NBR. diameter hole nozzle: 0 ÷ 3 mm. flow nominal: 300 l/min at a pressure of 6 bar. pressure Maximum: 12 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: from -10°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-27141	Feather for air with rubber a nozzle, reg. nozzle 0–2.3 mm, plug DN 7.2, aluminum	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Handy Feather for compressed air, intended for fast removing with surfaces all contamination: liquids, fine chips, filings itp. made with anodized aluminum. equipped in nozzle with the possibility regulating flow one hand – od narrow for wide stream air. rubber a nozzle na the tip feather protects surfaces against scratching. terminated a plug EUROSTANDARD 7.2. Material: housing – aluminum protected method anodized; sealing – NBR. diameter hole nozzle: 0 ÷ 3 mm. flow nominal: 300 l/min at a pressure of 6 bar. pressure Maximum: 12 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: from -10°C to +60°C.