Can SAE 6000 flange end, type ZSK112, heavy series, carbon steel be crimped using a standard hydraulic crimping sleeve, and which sleeve profiles are compatible?

Yes . the SAE 6000 flange end, type ZSK112, heavy series, carbon steel can be crimped using a standard hydraulic crimping sleeve, provided the sleeve is appropriate for the hose construction and size. The part is specifically designed for crimping on hydraulic and industrial hoses and requires a sleeve that matches the hose type (e.g., single-wire, multi-wire, braid, or textile reinforcement) and the hoseâs nominal diameter. Compatible sleeve profiles typically include: - Full-round (U) profile sleeves for single-wire and textile-reinforced hoses. - Hexagonal or oval compacting profiles for multi-wire braided hoses (commonly used in heavy series connections). - Stepped or formed sleeves when specified by the hose manufacturer for particular assemblies. Always verify: sleeve material (steel, plated), internal diameter and length for the hose size, and crimping die set calibrated for the sleeve profile. Follow hose and sleeve manufacturer crimp specifications and recommended crimping force to ensure a proper, leak-free assembly.

Is SAE 6000 flange end, type ZSK112, heavy series, carbon steel compatible with cold-swaging or mechanical crimping methods?

Yes. SAE 6000 flange end, type ZSK112, heavy series, carbon steel is designed for crimping using a suitable crimping sleeve for hydraulic and industrial hoses, so it is compatible with mechanical crimping/coldâswaging methods when the correct crimping sleeve and machine settings for the specific hose and fitting are used. Ensure you follow the hose and crimping equipment manufacturerâs specifications, recommended die profiles, and crimp dimensions to achieve a secure, leakâfree connection.

What are the recommended hose types and crimping sleeve materials for SAE 6000 flange end, type ZSK112, heavy series, carbon steel?

For SAE 6000 flange end, type ZSK112, heavy series, carbon steel, galvanized: - Recommended hose types: - SAE 100R1/EN 853 1SN (single wire braid). for medium pressure applications where flexibility is needed. - SAE 100R2/EN 853 2SN (two-wire braid). for higher pressure hydraulic systems requiring greater reinforcement. - Multi-spiral or textile-reinforced hydraulic hoses compatible with flange fittings, if specified by hose manufacturer for heavy series flanges. - Ensure the hose bore and pressure rating match the flange size and system requirements; consult hose manufacturer compatibility charts for flange-type terminations. - Recommended crimping sleeve materials and characteristics: - Carbon steel sleeves, galvanized or zinc-plated, to match the flange material (carbon steel, galvanized) and provide corrosion resistance. - Sleeves specifically sized and profiled for type ZSK112 heavy series flanges. manufacturer-specified dimensions and wall thickness to ensure proper crimp compression and sealing. - High-strength carbon steel sleeves (heat-treated) for heavy-duty, high-pressure applications to maintain mechanical integrity. - Use sleeves with internal geometry (if required) compatible with hose typeâsmooth bore for textile/spiral hoses or profiled/stepped for certain wire-braid constructions as per hose makerâs recommendations. - Crimping best practices: - Use a crimping sleeve and die set certified for SAE 6000 flange end, type ZSK112 heavy series. - Follow hose and sleeve manufacturer crimp specifications (crimp diameter, depth, and pattern). - Verify assembly with pressure testing per industry standards after crimping. Always confirm final selection with the hose and fitting manufacturers to ensure compatibility and safety for the specific application.

SAE 6000 flange end, type ZSK112, heavy series, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

SAE 6000 flange end (SFL), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK112-08-08	End fitting, coupling, SAE 1/2", hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZSK112-08-10	End. col. SAE 1/2", hose 5/8", heavy	16	-	In stock	Enquiry
TI-ZSK112-08-12	End. socket. SAE 1/2", hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZSK112-12-08	End. collar. SAE 3/4", hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZSK112-12-10	End. collar. SAE 3/4", hose 5/8", heavy	16	-	In stock	Enquiry
TI-ZSK112-12-12	End fitting, coupling, SAE 3/4", hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZSK112-12-16	End fitting, SAE 3/4", hose 1", heavy	25	-	In stock	Enquiry
TI-ZSK112-16-12	End fitting SAE 1", hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZSK112-16-16	End fitting, coupling, SAE 1", hose 1", heavy	25	-	In stock	Enquiry
TI-ZSK112-20-16	End. collar. SAE 1.1/4", hose 1", heavy	25	-	In stock	Enquiry
TI-ZSK112-20-20	End fitting SAE 1.1/4", hose 1.1/4", heavy	32	-	In stock	Enquiry
TI-ZSK112-24-20	End fitting SAE 1.1/2", hose 1.1/4", heavy	32	-	In stock	Enquiry
TI-ZSK112-24-24	End fitting SAE 1.1/2", hose 1.1/2", heavy	38	-	In stock	Enquiry
TI-ZSK112-32-24	End. collar. SAE 2", hose 1.1/2", heavy	38	-	In stock	Enquiry
TI-ZSK112-32-32	End fitting SAE 2", hose 2", heavy	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SAE 6000 flange end (SFL), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.