Teflon and antistatic hose, single braided steel AISI 304, SMOOTHBORE SWSB

Additional information

Material

PTFE – teflon and similar

Maximum operating temperature [°C]

260

Minimum operating temperature [°C]

-70

Vacuum resistance

no

Standard length [m]

20, 50

Reinforcement

steel braid

The hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. – as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar – depending on the hose diameter. Operating temperature: from -70°C to +260°C.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
AF-SWSB-06SMOOTHBORE hose SWSB 1/4"6240In stock
Enquiry
AF-SWSB-06ASSMOOTHBORE hose SWSB 1/4" antistatic.6240In stock
Enquiry
AF-SWSB-08SMOOTHBORE HOSE SWSB 5/16"8200In stock
Enquiry
AF-SWSB-08ASSMOOTHBORE hose SWSB 5/16" antistatic.8200In stock
Enquiry
AF-SWSB-10SMOOTHBORE hose SWSB 3/8"10190In stock
Enquiry
AF-SWSB-10ASSMOOTHBORE hose SWSB 3/8" anti-static.10190In stock
Enquiry
AF-SWSB-13SMOOTHBORE hose SWSB 1/2"12140In stock
Enquiry
AF-SWSB-13ASSMOOTHBORE hose SWSB 1/2" anti-static.12140In stock
Enquiry
AF-SWSB-16SMOOTHBORE hose SWSB 5/8"16110In stock
Enquiry
AF-SWSB-16ASSMOOTHBORE hose SWSB 5/8" anti-static.16110In stock
Enquiry
AF-SWSB-19SMOOTHBORE hose SWSB 3/4"2080In stock
Enquiry
AF-SWSB-19ASSMOOTHBORE hose SWSB 3/4" anti-static.2080In stock
Enquiry
AF-SWSB-25SMOOTHBORE hose SWSB 1"2555In stock
Enquiry
AF-SWSB-25ASSMOOTHBORE hose SWSB 1" anti-static.2555In stock
Enquiry

Do you need a larger quantity of products or a bespoke quote?

The hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. – as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar – depending on the hose diameter. Operating temperature: from -70°C to +260°C.

Additional information

Material

PTFE – teflon and similar

Maximum operating temperature [°C]

260

Minimum operating temperature [°C]

-70

Vacuum resistance

no

Standard length [m]

20, 50

Reinforcement

steel braid

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?