Is the Collet for Teflon hoses, carbon steel, AF-TH compatible with HYPERLINE SB, FX and V type PTFE hose diameters D1, D2, and D3?

Yes. Collet for Teflon hoses, carbon steel, AF-TH is compatible with HYPERLINE SB, FX and V type PTFE hoses provided the hose dimensions match the collet's specified diameters: D1 (outer diameter), D2 (locking diameter) and D3 (inner diameter). Because the AF-TH clamping sleeve is designed specifically for HYPERLINE SB, FX and V type PTFE hoses and is made of carbon steel, compatibility depends on ensuring the hose OD corresponds to D1, the hose ID corresponds to D3, and the locking engagement fits D2. If those three diameter measurements match the hose dimensions, the Collet for Teflon hoses, carbon steel, AF-TH will be compatible.

Does the Collet for Teflon hoses, carbon steel, AF-TH support PTFE HYPERLINE SB, FX, V hose sizes by D1, D2 and D3?

Yes. Collet for Teflon hoses, carbon steel, AF-TH supports PTFE HYPERLINE SB, FX, V hose sizes described by diameters D1 (outer), D2 (locking) and D3 (inner) because it is specifically an AF-TH clamping sleeve designed for HYPERLINE SB, FX, V type PTFE hoses. Material: carbon steel.

Can Collet for Teflon hoses, carbon steel, AF-TH accommodate HYPERLINE SB, FX, V PTFE hose dimensions D1, D2, D3?

Yes. Collet for Teflon hoses, carbon steel, AF-TH can accommodate HYPERLINE SB, FX, V PTFE hose dimensions D1, D2, D3 if the hose measurements fall within the colletâs specified ranges. Based on the AF-TH clamping sleeve description: - D1 (outer diameter): The collet must fit over the hose outer diameter. If D1 equals the colletâs maximum outer-fit dimension, the sleeve will accept the hose externally. - D2 (locking diameter): The colletâs locking range must match D2 so the clamping mechanism can securely engage the hose. The AF-TH is designed to lock on the hose at the designated locking diameter; ensure D2 lies within the colletâs locking tolerance. - D3 (inner diameter): The colletâs internal bore must clear the hose inner diameter where applicable (e.g., when the collet interfaces with an inner liner or insert). D3 must be compatible with any internal components or fittings used with the AF-TH. Material compatibility: Collet for Teflon hoses, carbon steel, AF-TH is made of carbon steel, which provides the mechanical strength required for clamping PTFE (HYPERLINE) hoses. Ensure corrosion, chemical and temperature conditions of your application are acceptable for carbon steel in contact with PTFE hoses. Conclusion: Verify the numeric values of HYPERLINE SB/FX/V D1, D2, D3 against the AF-TH colletâs specified outer-fit, locking-range and internal-bore dimensions. If each corresponding measurement falls within the AF-TH tolerances, the hose is compatible.

Collet for Teflon hoses, carbon steel, AF-TH

All products, PTFE hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	50

AF-TH clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – locking diameter. Diameter D3 [mm] – inner diameter. Material: carbon steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AF-TH-02	TH type bushing for Teflon hose 1/8"	2	-	In stock	Enquiry
AF-TH-03	TH type bushing for Teflon hose 3/16"	3	-	In stock	Enquiry
AF-TH-04	TH type bushing for Teflon hose 1/4"	4	-	In stock	Enquiry
AF-TH-05	TH type bushing for Teflon hose 5/16"	5	-	In stock	Enquiry
AF-TH-06	TH type bushing for Teflon hose 3/8"	6	-	In stock	Enquiry
AF-TH-08	TH type bushing for Teflon hose 1/2"	8	-	In stock	Enquiry
AF-TH-10	TH type bushing for Teflon hose 5/8"	10	-	In stock	Enquiry
AF-TH-12	TH type bushing for Teflon hose 3/4"	12	-	In stock	Enquiry
AF-TH-16	TH type bushing for Teflon hose. 1	16	-	In stock	Enquiry
AF-TH-20	TH type bushing for Teflon hose 1.1/4"	20	-	In stock	Enquiry
AF-TH-24	TH type bushing for Teflon hose 1.1/2"	25	-	In stock	Enquiry
AF-TH-32	TH type bushing for Teflon hose. 2	32	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

AF-TH clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – locking diameter. Diameter D3 [mm] – inner diameter. Material: carbon steel.