What is the maximum working pressure for the CAMLOCK AA double connector plug, aluminum, used in petrochemical transfer applications?

The maximum working pressure for the CAMLOCK AA double connector plug, aluminum, used in petrochemical transfer applications is up to 10 bar, depending on the connector size.

How do I properly maintain the CAMLOCK AA double connector plug, aluminum, to ensure safe operation up to its rated pressure?

To maintain the CAMLOCK AA double connector plug, aluminum, for safe operation up to its rated pressure, follow these steps: - Regular inspection: before each use check for cracks, deep scratches, corrosion, deformation or damaged threads and locking arms. Replace if any defect is present. - Seal and gasket check: inspect and replace worn or hardened gaskets (rubber) frequently; ensure proper seating to prevent leaks. - Cleaning: remove dirt, residues and chemical deposits with a mild detergent and water; rinse and dry thoroughly. Avoid harsh solvents that degrade aluminum or gaskets. - Lubrication: lightly lubricate cam armsâ hinges and male groove with an appropriate non-reactive, fluid-compatible lubricant (PTFE-based). Do not over-lubricate. - Proper assembly: ensure cams are fully engaged and locks are closed; verify alignment and that the gasket compresses evenly. - Pressure testing: perform periodic leak and pressure tests at or above working pressure per your maintenance schedule and applicable standards. - Storage: store dry, protected from UV and corrosive environments; keep gaskets separately in cool, dark conditions. - Documentation: log inspections, replacements and tests. These practices help ensure safe operation up to the connectorâs rated pressure (up to 10 bar depending on size).

Can I use the CAMLOCK AA double connector plug, aluminum, with fluids other than petroleum products?

Yes. but with important caveats. The CAMLOCK AA double connector plug, aluminum is designed primarily for transfer applications in the petrochemical industry and meets MIL-C-27487 (A-A-59326) dimensions and fit. Its construction (aluminum body, typical seals/gaskets and cam-lock mechanism) and pressure rating (up to ~10 bar depending on size) allow use with many non-petroleum fluids, provided compatibility checks are made: - Chemical compatibility: Verify that aluminum and the seal material (rubber, nitrile, EPDM, Viton, etc., used in your specific plug) are chemically compatible with your fluid. Aluminum can corrode or be attacked by strong acids, alkalies, halogenated hydrocarbons, and some solvents. Choose seal materials rated for the fluid and temperature. - Pressure and temperature: Ensure the working pressure and temperature of your process do not exceed the connectorâs rated limits (size-dependent max â10 bar) and the temperature limits of the seals. - Product contamination and safety: For food, pharmaceutical, or potable water use, aluminum and typical industrial seals may be unsuitable. Also beware of galvanic corrosion if mating with dissimilar metals. - Abrasive or particulate fluids: Suspended solids or abrasive slurries can accelerate wear and cause leaks. - Regulatory and application requirements: Some applications require stainless steel or other alloys for durability, hygiene, or chemical resistance. Recommendations: Consult the connector supplier or manufacturer for full material/specifications (exact aluminum alloy and seal type), provide the fluidâs chemical identity, temperature and pressure, and request an explicit compatibility confirmation. If in doubt, consider a CAMLOCK made of stainless steel or specify appropriate seal materials.

Plug double coupling CAMLOCK AA, aluminum

Additional information

Material	AL – aluminum

Plug double coupling CAMLOCK AA made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-AA-100-100-AX	Connector CAMLOCK AA 1" x 1", aluminum	-	10	In stock	Enquiry
AC-AA-125-125-AX	Connector CAMLOCK AA 1.1/4" x 1.1/4", aluminum	-	10	In stock	Enquiry
AC-AA-150-150-AX	Connector CAMLOCK AA 1.1/2" x 1.1/2", aluminum	-	10	In stock	Enquiry
AC-AA-150-200-AX	Connector CAMLOCK AA 1.1/2" x 2", aluminum	-	10	In stock	Enquiry
AC-AA-200-200-AX	Connector CAMLOCK AA 2" x 2", aluminum	-	10	In stock	Enquiry
AC-AA-200-250-AX	Connector CAMLOCK AA 2" x 2.1/2", aluminum	-	10	In stock	Enquiry
AC-AA-200-300-AX	Connector CAMLOCK AA 2" x 3", aluminum	-	10	In stock	Enquiry
AC-AA-300-300-AX	Connector CAMLOCK AA 3" x 3", aluminum	-	10	In stock	Enquiry
AC-AA-300-400-AX	Connector CAMLOCK AA 3" x 4", aluminum	-	10	In stock	Enquiry
AC-AA-400-400-AX	Connector CAMLOCK AA 4" x 4", aluminum	-	10	In stock	Enquiry
AC-AA-400-600-AX	Connector CAMLOCK AA 4" x 6", aluminum	-	10	In stock	Enquiry
AC-AA-600-600-AX	Connector CAMLOCK AA 6" x 6", aluminum	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug double coupling CAMLOCK AA made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.