Can the Flange connection kit, AISI 304 steel, DIN 931 screws withstand outdoor marine environments without additional corrosion protection?

Flange connection kit, AISI 304 steel, DIN 931 Format: AISI 304 (A2-70) stainless steel offers moderate corrosion resistance but is not ideal for harsh marine environments. In atmospheric or mildly corrosive coastal conditions it can perform acceptably for a time, but in direct marine exposure (salt spray, splash, tidal zones, long-term humidity) 304 is susceptible to pitting and crevice corrosion. DIN 931 screws, DIN 934 nuts and DIN 125A washers in A2-70 will therefore likely corrode faster than higher-grade stainless steels (e.g. AISI 316/A4) or protected metals. Recommendation: For reliable long-term outdoor marine performance use additional corrosion protection (passivation, coatings, sacrificial anodes) or choose AISI 316 (A4) fasteners. If 304 is used, limit exposure to splash-free areas, ensure good drainage/ventilation, avoid galvanic couples with dissimilar metals, and plan for regular inspection and maintenance.

Is the Flange connection kit, AISI 304 steel, DIN 931 suitable for use in coastal or salt-spray environments without extra protection?

Flange connection kit, AISI 304 steel, DIN 931 - not recommended for coastal or salt-spray environments without extra protection. AISI 304 (A2-70) has limited corrosion resistance to chlorides; in marine or salt-spray conditions it is prone to pitting and crevice corrosion. For coastal use choose higher-corrosion-grade material (AISI 316 / A4) or apply protective measures: coatings (hot-dip galvanizing not ideal for stainless bolts), passivation, sacrificial anodes, or use corrosion-resistant fasteners and washers. If unavoidable, perform regular inspection and maintenance.

Does the Flange connection kit, AISI 304 steel, DIN 931 resist chloride-induced corrosion in coastal installations?

Flange connection kit, AISI 304 steel, DIN 931 Format. AISI 304 (material) offers good general corrosion resistance, but its resistance to chloride-induced (pitting and crevice) corrosion in coastal installations is limited. In marine or coastal environments with elevated chloride concentrations and humidity, AISI 304 stainless steel (mechanical class A2-70 for screws and nuts as supplied) is susceptible to localized corrosion over time, especially in crevices such as flange faces, under washers, and around threads. Praktyczne wnioski: - Short-term and low-exposure use: acceptable for sheltered or intermittently wet locations with regular maintenance and cleaning. - Continuous coastal exposure or splash/immersion: not recommended. For reliable long-term resistance to chloride-induced corrosion choose higher-alloyed grades such as AISI 316 (containing molybdenum) or duplex/superaustenitic steels, or apply protective coatings and ensure design measures to avoid crevices and allow drainage and ventilation. - If retention of supplied kit is required, increase maintenance frequency, use corrosion inhibitors, or consider replacing critical fasteners with A4/316 equivalents to extend service life.

Flange connection kit, AISI 304 steel, DIN 931

All products, Flange couplings/

Additional information

Flange connection set (EN 1092), type SZ1. Included: DIN931 screws – 4 pieces, DIN934 nuts – 4 pieces, and DIN125A washers – 4 pieces. Mechanical property class: A2-70 – screws; A2-70 – nuts. Selection of screws and nuts for flanges according to the table in the appendix. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TK-SZ1-M12-050-B-SS304	Set (4 pcs.) M12x50 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M12-055-B-SS304	Set (4 pcs.) M12x55 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M12-060-B-SS304	Set (4 pcs.) M12x60 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M12-070-B-SS304	Set (4 pcs.) M12x70 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M12-080-B-SS304	Set (4 pcs.) M12x80 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-060-B-SS304	Set (4 pcs.) M16x60 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-065-B-SS304	Set (4 pcs.) M16x65 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-070-B-SS304	Set (4 pcs.) M16x70 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-075-B-SS304	Set (4 pcs.) M16x75 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-080-B-SS304	Set (4 pcs.) M16x80 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-085-B-SS304	Set (4 pcs.) M16x85 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-090-B-SS304	Set (4 pcs.) M16x90 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-095-B-SS304	Set (4 pcs.) M16x95 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-100-B-SS304	Set (4 pcs.) M16x100 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-110-B-SS304	Set (4 pcs.) M16x110 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M16-120-B-SS304	Set (4 pcs.) M16x120 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M20-070-B-SS304	Set (4 pcs.) M20x70 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M20-075-B-SS304	Set (4 pcs.) M20x75 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M20-080-B-SS304	Set (4 pcs.) M20x80 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M20-100-B-SS304	Set (4 pcs.) M20x100 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M20-120-B-SS304	Set (4 pcs.) M20x120 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M24-090-B-SS304	Set (4 pcs.) M24x90 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M24-110-B-SS304	Set (4 pcs.) M24x110 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M24-120-B-SS304	Set (4 pcs.) M24x120 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry
TK-SZ1-M24-140-B-SS304	Set (4 pcs.) M24x140 screws, nuts, washers, AISI 304	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flange connection set (EN 1092), type SZ1. Included: DIN931 screws – 4 pieces, DIN934 nuts – 4 pieces, and DIN125A washers – 4 pieces. Mechanical property class: A2-70 – screws; A2-70 – nuts. Selection of screws and nuts for flanges according to the table in the appendix. Material: AISI 304 steel.