Is the 1L tank for AKBO multifunction gun compatible with all AKBO MNAP2-BL quick couplings and foam nozzles?

Is the 1L tank for AKBO multifunction gun compatible with all AKBO MNAP2-BL quick couplings and foam nozzles? Yes. The 1L tank for AKBO multifunction gun is described as having a quick coupling for connection specifically to the multifunctional gun AKBO MNAP2-BL and comes equipped with an injector and foam nozzle. That indicates it is designed to mate with the AKBO MNAP2-BLâs quick coupling system and to work with the foam nozzle configuration intended for that gun. While compatibility with third-party or non-standard couplings/nozzles cannot be guaranteed, the 1L tank is compatible with AKBO MNAP2-BL quick couplings and the foam nozzle setup provided for that gun.

Can the 1l tank for AKBO multifunction gun handle both corrosive and mild cleaning agents safely?

The 1l tank for AKBO multifunction gun is designed for cleaning and foaming agents and includes an injector, foam nozzle, and quick coupling for connection to the AKBO MNAP2-BL multifunctional gun. Based on that description, it is intended to handle common cleaning and foaming (mild) agents safely. However, the description does not specify materials, chemical compatibility, or resistance to corrosive substances. Therefore, while the 1l tank for AKBO multifunction gun can be used with mild cleaning agents and typical foaming solutions, you should not assume compatibility with strongly corrosive chemicals without manufacturer confirmation or material specifications. For corrosive agents, consult the manufacturerâs data sheet or supplier to verify safe use.

How do I attach the 1l tank for AKBO multifunction gun to the AKBO MNAP2-BL injector and foam nozzle?

To attach the 1l tank for AKBO multifunction gun to the AKBO MNAP2-BL injector and foam nozzle, follow these steps: 1. Ensure safety: depressurize the system and wear protective gloves and goggles. Make sure the AKBO MNAP2-BL gun and injector are clean and free of debris. 2. Prepare the tank: fill the 1l tank for AKBO multifunction gun Format with the appropriate cleaning or foaming agent, diluted per manufacturer instructions. Secure the tank cap tightly. 3. Inspect the quick coupling: check the quick coupling on the tank and the matching connector on the AKBO MNAP2-BL injector/foam nozzle for damage or dirt. Clean if necessary. 4. Align and connect: hold the 1l tank for AKBO multifunction gun Format under the injector/foam nozzle so the quick coupling halves align. Push the tankâs coupling straight into the gunâs connector until you hear or feel a positive click indicating engagement. 5. Verify the lock: gently tug the tank to confirm it is securely latched. The quick coupling should prevent accidental detachment. 6. Prime and test: slowly open the gunâs valve or trigger briefly to allow the injector to draw fluid from the 1l tank for AKBO multifunction gun Format and produce foam. Check for leaks at the coupling. If leaking, depressurize and re-seat the connection. 7. Operational check: adjust foam settings on the injector/nozzle as needed and perform a short spray test on a safe surface to confirm correct foaming and flow. 8. After use: close the valve, depressurize, disconnect the tank by pressing the coupling release (if present) and pulling apart, then empty or store the 1l tank for AKBO multifunction gun Format according to safety guidelines. If the coupling does not engage or you see persistent leaks, consult the AKBO MNAP2-BL user manual or contact AKBO support.

A bowl 1l for gun multifunction AKBO

Additional information

Material	P – material (plastic)

A bowl o capacity 1l na agent cleaning and foaming, with injector and nozzle for foam, with quick coupling for connection for gun multifunction AKBO MNAP2-BL.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-TANKC01	Wytwornica foam for a gun multifunction AKBO: A bowl 1 l + injector + nozzle, socket DN11.8	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A bowl o capacity 1l na agent cleaning and foaming, with injector and nozzle for foam, with quick coupling for connection for gun multifunction AKBO MNAP2-BL.