Is the DKR-F hydraulic end, type ZBW140 in AISI 316L steel compatible with standard flat gaskets for BSP internal-threaded hose fittings?

Yes. The DKR-F hydraulic end, type ZBW140, AISI 316L steel is compatible with standard flat gaskets for BSP internal-threaded hose fittings. The product description specifies internal BSP thread and nut with flat sealing and explicitly states it requires the use of an additional flat gasket (DKR-F). Therefore use a standard flat gasket sized for the BSP internal thread and the fittingâs nominal size; ensure gasket material is compatible with AISI 316L and the hydraulic fluid/temperature for your application.

Does the DKR-F hydraulic end, type ZBW140, AISI 316L steel require a specific flat gasket thickness for BSP internal-threaded hose fittings?

No, the DKR-F hydraulic end, type ZBW140, AISI 316L steel does not specify a single universal flat gasket thickness. The product description states it requires the use of an additional flat gasket for flat sealing with BSP internal-threaded hose fittings, but the correct gasket thickness depends on the specific BSP thread size and the mating componentâs sealing face geometry. Select a gasket material and thickness that match the BSP thread size and conform to pressure and media compatibility (AISI 316L use suggests corrosion-resistant gasket materials). For exact thickness and part number, consult the manufacturerâs sealing table or technical datasheet for ZBW140 or contact their technical support.

Can the DKR-F hydraulic end, type ZBW140, AISI 316L steel be used with BSP threaded hoses requiring a flat gasket under pressure?

Yes. The DKR-F hydraulic end, type ZBW140, AISI 316L steel can be used with BSP threaded hoses that require a flat gasket under pressure. The product description specifies an internal BSP thread and nut with flat sealing and explicitly requires an additional flat gasket (DKR-F). It is designed for crimping onto hydraulic and industrial hoses using an appropriate crimping sleeve for the hose type, and its AISI 316L construction is suitable for demanding environments. Ensure you install the correct flat gasket specified and use the proper crimping sleeve and crimping procedure for a reliable pressure seal.

DKR-F hydraulic end, type ZBW140, AISI 316L steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	120, 15

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for the hose), with internal BSP thread and nut, flat sealing – requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW140-04-04-SS	End. GW 1/4" BSP, hose 1/4", butt, AISI 316L	6	450	In stock	Enquiry
TI-ZBW140-06-04-SS	End. GW 3/8" BSP, hose 1/4", butt, AISI 316L	6	445	In stock	Enquiry
TI-ZBW140-06-05-SS	End. GW 3/8" BSP, hose 5/16", face-to-face, AISI 316L	8	445	In stock	Enquiry
TI-ZBW140-06-06-SS	End. GW 3/8" BSP, hose 3/8", butt, AISI 316L	10	445	In stock	Enquiry
TI-ZBW140-08-04-SS	End. GW 1/2" BSP, hose 1/4", butt, AISI 316L	6	415	In stock	Enquiry
TI-ZBW140-08-05-SS	End. GW 1/2" BSP, hose 5/16", butt, AISI 316	8	415	In stock	Enquiry
TI-ZBW140-08-06-SS	End. GW 1/2" BSP, hose 3/8", butt, AISI 316L	10	415	In stock	Enquiry
TI-ZBW140-08-08-SS	End. GW 1/2" BSP, hose 1/2", butt, AISI 316L	12	415	In stock	Enquiry
TI-ZBW140-12-08-SS	End. GW 3/4" BSP, hose 1/2", butt, AISI 316L	12	350	In stock	Enquiry
TI-ZBW140-12-10-SS	End. GW 3/4" BSP, hose 5/8", butt, AISI 316L	16	350	In stock	Enquiry
TI-ZBW140-12-12-SS	End. GW 3/4" BSP, hose 3/4", butt, AISI 316L	20	350	In stock	Enquiry
TI-ZBW140-12-16-SS	End. GW 3/4" BSP, hose 1", face-to-face, AISI 316	25	280	In stock	Enquiry
TI-ZBW140-16-12-SS	End. GW 1" BSP, hose 3/4", butt, AISI 316L	20	280	In stock	Enquiry
TI-ZBW140-16-16-SS	End. GW 1" BSP, hose 1", face-to-face, AISI 316L	25	280	In stock	Enquiry
TI-ZBW140-20-16-SS	End. GW 1.1/4" BSP, hose 1", butt, AISI 316L	25	210	In stock	Enquiry
TI-ZBW140-20-20-SS	End. GW 1.1/4" BSP, hose 1.1/4", butt, AISI 316L	32	210	In stock	Enquiry
TI-ZBW140-24-24-SS	End. GW 1.1/2" BSP, hose 1.1/2", butt, AISI 316L	38		In stock	Enquiry
TI-ZBW140-32-32-SS	End. GW 2" BSP, hose 2", butt, AISI 316L	50		In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for the hose), with internal BSP thread and nut, flat sealing – requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.