Can the 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 be crimped onto 4SP hoses using TI-N sleeves without cutting the hose rubber?

Yes. The 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 can be crimped onto 4SP hoses using TI-N sleeves without cutting the hose rubber. The fitting is a non-skive design with an internal BSP thread and a 60Â° cone with Oâring sealing (DKOR 90), specifically intended for crimping on hose types 4SP (also 4SH, R13, R15) with TIâN crimping sleeves; the installation is performed without removing the hose cover. Material: carbon steel, galvanized.

Is the 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 compatible with TI-N crimping sleeves on R13 hoses without cutting the hose rubber?

Yes. The 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 is compatible with TI-N crimping sleeves on R13 hoses without cutting the hose rubber. It is specifically designed for crimping in R13 (and 4SP, 4SH, R15) using TI-N sleeves, features internal BSP thread and 60Â° cone sealing with an O-ring, and is installed without removing the hose rubber.

Can the 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 be crimped onto R15 hoses with TI-N sleeves without cutting the hose rubber?

Yes. The 90Â° NON SKIVE DKOR end, carbon steel, type NBW210 can be crimped onto R15 hoses using TI-N sleeves without cutting the hose rubber. The DKOR 90 is specifically designed as a non-skive fitting with an internal BSP thread and a 60Â° cone sealing surface with an O-ring, intended for crimping into hose types 4SP, 4SH, R13, and R15 using TI-N crimping sleeves. Installation is executed without removing or cutting the hose rubber, and the fitting material (carbon steel, galvanized) is suitable for standard crimping processes with TI-N sleeves.

90° NON SKIVE DKOR end, carbon steel, type NBW210

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	2

90° NON SKIVE fitting with internal BSP thread, with sealing on a 60° cone with an O-ring (DKOR 90), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N… . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-NBW210-12-12	End. 90° NON SKIVE GW 3/4" BSP, hose 3/4", o-ring	20	420	In stock	Enquiry
TI-NBW210-16-12	End. 90° NON SKIVE GW 1" BSP, hose 3/4", o-ring	20	380	In stock	Enquiry
TI-NBW210-16-16	End. 90° NON SKIVE G1" BSP, hose 1", o-ring	25	380	In stock	Enquiry
TI-NBW210-20-16	End 90° NON SKIVE GW 1.1/4" BSP, hose 1", o-ring	25	325	In stock	Enquiry
TI-NBW210-20-20	End. 90° NON SKIVE GW 1.1/4" BSP, hose 1.1/4", o-ring	32	325	In stock	Enquiry
TI-NBW210-24-20	End fitting 90° NON SKIVE GW 1.1/2" BSP, hose 1.1/4", o-ring	32	290	In stock	Enquiry
TI-NBW210-24-24	End. 90° NON SKIVE GW 1.1/2" BSP, hose 1.1/2", o-ring	38	290	In stock	Enquiry
TI-NBW210-32-32	End 90° NON SKIVE GW 2" BSP, hose 2", o-ring	50	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° NON SKIVE fitting with internal BSP thread, with sealing on a 60° cone with an O-ring (DKOR 90), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N… . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.