Can CEL hydraulic end, type ZMZ111 light series (carbon steel) be crimped using standard sleeves for metric-threaded, 60Â° cone sealed Z-type hydraulic tails?

Yes . the CEL hydraulic end, type ZMZ111, light series (carbon steel) can be crimped using a standard crimping sleeve intended for metric-threaded, 60Â° cone sealed Z-type hydraulic tails, provided the sleeve and crimping parameters match the hose assembly requirements. The product description explicitly states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose." Key conditions to ensure a proper, leak-free and safe crimp: - Use a sleeve sized and specified for the exact hose type (inner/outer diameter, reinforcement type). - Verify the sleeve is intended for Z-type external metric thread with 60Â° cone (CEL) sealing geometry. - Follow the hose manufacturerâs recommended crimp dimensions, pressure ratings, and tooling (machine settings, die profile). - Confirm material compatibility (carbon steel, galvanized) and that crimping tooling is appropriate for galvanized fittings. - Inspect assembled hose ends for correct insertion depth, sleeve alignment, and absence of damage; perform pressure/test per standards. If any of these conditions are not met, use manufacturer-approved sleeves or consult the hose/fitting supplier for the correct sleeve and crimping specification.

Can CEL hydraulic end, type ZMZ111, light series, carbon steel be crimped with standard sleeves for metric-threaded 60Â° cone Z-type tails?

Yes. CEL hydraulic end, type ZMZ111, light series, carbon steel can be crimped with standard sleeves for metric-threaded 60Â° cone Z-type tails, provided the sleeve is appropriate for the hose type and matches the dimensions of the light-series fitting. The fitting is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose; ensure sleeve inner diameter, length and crimp profile correspond to the hose and the ZMZ111 specifications, and follow manufacturer crimping parameters (press force, die set) to achieve a proper, leak-free assembly.

Is CEL hydraulic end, type ZMZ111, light series, carbon steel compatible with crimping sleeves for metric-threaded 60Â° cone Z-tails?

Yes. CEL hydraulic end, type ZMZ111, light series, carbon steel is compatible with crimping sleeves for metric-threaded 60Â° cone Z-tails. The product description specifies an external metric thread with sealing on a 60Â° cone (CEL) and is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type, so a proper crimping sleeve for metric-threaded 60Â° cone Z-tails is appropriate. Ensure you use a sleeve sized and rated for the specific hose construction and crimping equipment to achieve correct assembly and pressure rating.

Fitting hydraulic CEL, type ZMZ111, series light, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with metric male thread, 60° cone sealing (CEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMZ111-10-04	Fitting M10x1 male, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-12-03	Fitting M12x1.5 male, hose 3/16", 24°, light	5	-	In stock	Enquiry
TI-ZMZ111-12-04	Fitting M12x1.5 male, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-14-04	Fitting M14x1.5 male, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-16-04	Fitting M16x1.5 male, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-16-05	Fitting M16x1.5 male, hose 5/16", 24°, light	8	-	In stock	Enquiry
TI-ZMZ111-16-06	Fitting M16x1.5 male, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-18-04	Fitting M18x1.5 male, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-18-05	Fitting M18x1.5 male, hose 5/16", 24°, light	8	-	In stock	Enquiry
TI-ZMZ111-18-06	Fitting M18x1.5 male, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-22-06	Fitting M22x1.5 male, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-22-08	Fitting M22x1.5 male, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-22-10	Fitting M22x1.5 male, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-22X16L-08	Fitting M22x1.5 male, 16L, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-26-08	Fitting M26x1.5 male, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-26-10	Fitting M26x1.5 male, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-27-10	Fitting M27x2 male, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-27X1,5-10	Fitting M27x1.5 male, hose 5/8", 24/60°, light	16	-	In stock	Enquiry
TI-ZMZ111-30-10	Fitting M30x2 male, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-30-12	Fitting M30x2 male, hose 3/4", 24°, light	20	-	In stock	Enquiry
TI-ZMZ111-30-16	Fitting M30x2 male, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-36-16	Fitting M36x2 male, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-45-16	Fitting M45x2 male, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-45-20	Fitting M45x2 male, hose 1.1/4", 24°, light	32	-	In stock	Enquiry
TI-ZMZ111-52-24	Fitting M52x2 male, hose 1.1/2", 24°, light	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with metric male thread, 60° cone sealing (CEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.