Can the 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 be crimped on 4SP/4SH/R13/R15 hoses with TI-N sleeve without cutting the hose rubber?

Yes. The 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 can be crimped on 4SP/4SH/R13/R15 hoses using a TI-N sleeve without cutting the hose rubber. The product is explicitly described as a 45Â° NON SKIVE end with internal metric thread, sealing on a 24Â° cone with an Oâring (DKOS 45), heavy series, intended for crimping on hose types 4SP, 4SH, R13 and R15 using the TIâN crimping sleeve, and its installation is specified as "without cutting the hose rubber." Material: carbon steel, galvanized.

Does the 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 require special tools or settings when crimped on 4SP/4SH/R13/R15 with TI-N sleeve?

The 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 does not require special tools or altered crimping settings beyond standard procedures for TIâN sleeves on 4SP/4SH/R13/R15 hoses. It is designed for crimping with a TIâN sleeve without cutting the hose rubber; use the manufacturerârecommended crimper and die set for TIâN sleeves and the hose size. Ensure correct die profile, crimp dimension and press force per the TIâN sleeve and hose specifications, and verify crimp dimensions after assembly. No additional machining or special fixtures are needed.

Is the 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 suitable for hoses with pre-installed fittings?

Yes. the 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 is suitable for hoses with pre-installed fittings, with the following conditions: - The product is a 45Â° NON SKIVE end with internal metric thread and sealing on a 24Â° cone with Oâring (DKOS 45), heavy series, intended specifically for crimping onto hoses type 4SP, 4SH, R13, and R15 using the TIâN crimping sleeve. - âNonâskiveâ and the installation note âwithout cutting the hose rubberâ mean the hose cover is not removed prior to assembly, so the fitting is designed to be crimped over the intact hose with preâinstalled fittings that are compatible with nonâskive assembly. - Compatibility requires that the hose is one of the specified types (4SP, 4SH, R13, R15), the preâinstalled fittingâs geometry matches the TIâN sleeve system, and the crimping process uses the correct TIâN sleeve and crimp dimensions for NMW322. - Material and finish (carbon steel, galvanized) are standard for these applications but do not affect the ability to use preâinstalled fittings, provided the mechanical and sealing interfaces match. Conclusion: If your hose is type 4SP/4SH/R13/R15, the preâinstalled fitting is intended for TIâN sleeve crimping, and you use the correct TIâN sleeve and crimp parameters for NMW322, then the 45Â° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322 is suitable for hoses with preâinstalled fittings.

45° NON SKIVE DKOS end, heavy series, carbon steel, type NMW322

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	3

45° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 45), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-NMW322-30-12	End 45° NON SKIVE GWM30x2, hose 3/4"	20	420	In stock	Enquiry
TI-NMW322-36-12	End 45° NON SKIVE GW M36x2, hose 3/4"	20	420	In stock	Enquiry
TI-NMW322-36-16	End. 45° NON SKIVE GWM36x2, hose 1"	25	380	In stock	Enquiry
TI-NMW322-42-16	End 45° NON SKIVE GW M42x2, hose 1"	25	380	In stock	Enquiry
TI-NMW322-42-20	End 45° NON SKIVE GWM42x2, hose 1.1/4"	32	325	In stock	Enquiry
TI-NMW322-52-20	End fitting 45° NON SKIVE GWM52x2, hose 1.1/4"	32	325	In stock	Enquiry
TI-NMW322-52-24	End 45° NON SKIVE GWM52x2, hose 1.1/2"	38	290	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

45° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 45), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.