What crimping sleeves are compatible with DKR hydraulic end, type ZBW110, AISI 316 steel (PH) for proper hose crimping?

For DKR hydraulic end, type ZBW110, AISI 316 steel (PH) the compatible crimping sleeves are those specifically intended for the hose type being used and additionally marked with the suffix â-PHâ. Use stainless-steel (AISI 316) crimping sleeves sized to match the hose outer diameter and crimp profile specified by the hose manufacturer, with the part number ending in â-PHâ to ensure material compatibility and proper fit for the ZBW110 DKR hydraulic end (60Â° cone, internal BSP thread and nut). Confirm sleeve inner diameter, length and crimp dimensions against the hose makerâs data sheet and select a sleeve rated for hydraulic pressures of your application.

Which crimping sleeve dimensions and specs are required for DKR hydraulic end, type ZBW110, AISI 316 steel (PH)?

For DKR hydraulic end, type ZBW110, AISI 316 steel (PH) you must use a crimping sleeve sized to the hose type and marked with the â-PHâ suffix (indicating compatibility with AISI 316/Pearlitic-Hardness finish). The sleeve must match the hose inner/outer diameters and crimp profile recommended by the hose manufacturer for Z-series fittings; material AISI 316 stainless steel; length and wall thickness per hose makerâs specification; compatible with crimping machines for ZBW110 cone geometry and 60Â° DKR sealing. Ensure sleeve internal bore equals hose outer diameter, sleeve end chamfered to accept the fitting tail, and that crimp dimension (collapsed diameter) meets the hose supplierâs required final crimp diameter for the specific hose and ZBW110 fitting. Always verify exact sleeve index and crimp dimensions with the hose manufacturer and use sleeves marked â-PHâ.

Can DKR hydraulic end, type ZBW110, AISI 316 steel (PH) be used with crimping sleeves from other manufacturers?

Yes. DKR hydraulic end, type ZBW110, AISI 316 steel (PH) can be used with crimping sleeves from other manufacturers, provided the sleeves exactly match the hose type and the sleeve is specifically intended for use with PH-marked fittings. Key points to ensure compatibility and safety: - Sleeve type match: The sleeve must be designed for the exact hose construction (diameter, layers, reinforcement) you are using. Using a sleeve for a different hose type risks poor crimp and failure. - PH designation: Use crimping sleeves that are additionally marked with â-PHâ (or explicitly specified for PH fittings). The ZBW110 (PH) was designed to be crimped with sleeves suitable for PH versions. - Dimensional and profile compatibility: The sleeveâs internal profile and crimp dimensions must produce the correct crimp geometry for the ZBW110 tail and the hose. Cross-manufacturer sleeves can work if they follow the same dimensional/crimp standards. - Material and corrosion: AISI 316 fitting offers corrosion resistance; using a sleeve of incompatible material may create galvanic or corrosion issues in aggressive environments. - Manufacturer specifications and approvals: Always verify the sleeve manufacturerâs datasheet, recommended crimping parameters, and approvals. If possible, use sleeves and crimp specs tested with AISI 316 PH fittings or explicitly certified as compatible. - Crimping equipment and parameters: Use the correct crimping machine, die set, and pressure settings recommended for the chosen sleeve and the ZBW110. Incorrect crimping can cause leaks or safety hazards. - Testing and inspection: After assembly, perform pressure and leak tests and visual inspection per industry practice. For critical applications, follow traceable testing and certification procedures. Conclusion: Cross-manufacturer sleeves can be used if they are the correct sleeve type for the hose, marked/approved for PH fittings, match required dimensions and materials, and are crimped according to the proper specifications and tested afterward.

DKR hydraulic end, type ZBW110, AISI 316 steel (PH)

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, 60° sealing cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW110-02-03-SS-PH	End. GW 1/8" BSP, hose 3/16", cone 60°, AISI 316	5		In stock	Enquiry
TI-ZBW110-02-04-SS-PH	End. GW 1/8" BSP, hose 1/4", cone 60°, AISI 316	6		In stock	Enquiry
TI-ZBW110-04-03-SS-PH	End. GW 1/4" BSP, hose 3/16", cone 60°, AISI 316	5	450	In stock	Enquiry
TI-ZBW110-04-04-SS-PH	End. GW 1/4" BSP, hose 1/4", cone 60°, AISI 316	6	450	In stock	Enquiry
TI-ZBW110-04-05-SS-PH	End. GW 1/4" BSP, hose 5/16", cone 60°, AISI 316	8	450	In stock	Enquiry
TI-ZBW110-04-06-SS-PH	End. GW 1/4" BSP, hose 3/8", cone 60°, AISI 316	10	450	In stock	Enquiry
TI-ZBW110-06-04-SS-PH	End. GW 3/8" BSP, hose 1/4", cone 60°, AISI 316	6	445	In stock	Enquiry
TI-ZBW110-06-05-SS-PH	End. GW 3/8" BSP, hose 5/16", cone 60°, AISI 316	8	445	In stock	Enquiry
TI-ZBW110-06-06-SS-PH	End. GW 3/8" BSP, hose 3/8", cone 60°, AISI 316	10	445	In stock	Enquiry
TI-ZBW110-06-08-SS-PH	End. GW 3/8" BSP, hose 1/2", cone 60°, AISI 316	12	445	In stock	Enquiry
TI-ZBW110-08-04-SS-PH	End. GW 1/2" BSP, hose 1/4", cone 60°, AISI 316	6	415	In stock	Enquiry
TI-ZBW110-08-05-SS-PH	End. GW 1/2" BSP, hose 5/16", cone 60°, AISI 316	8	415	In stock	Enquiry
TI-ZBW110-08-06-SS-PH	End. GW 1/2" BSP, hose 3/8", cone 60°, AISI 316	10	415	In stock	Enquiry
TI-ZBW110-08-08-SS-PH	End. GW 1/2" BSP, hose 1/2", cone 60°, AISI 316	12	415	In stock	Enquiry
TI-ZBW110-08-10-SS-PH	End. GW 1/2" BSP, hose 5/8", cone 60°, AISI 316	16	415	In stock	Enquiry
TI-ZBW110-08-12-SS-PH	End. GW 1/2" BSP, hose 3/4", cone 60°, AISI 316	20	415	In stock	Enquiry
TI-ZBW110-10-08-SS-PH	End. GW 5/8" BSP, hose 1/2", cone 60°, AISI 316	12	350	In stock	Enquiry
TI-ZBW110-10-10-SS-PH	End. GW 5/8" BSP, hose 5/8", cone 60°, AISI 316	16	350	In stock	Enquiry
TI-ZBW110-12-04-SS-PH	End. GW 3/4" BSP, hose 1/4", cone 60°, AISI 316	6	350	In stock	Enquiry
TI-ZBW110-12-08-SS-PH	End. GW 3/4" BSP, hose 1/2", cone 60°, AISI 316	12	350	In stock	Enquiry
TI-ZBW110-12-10-SS-PH	End. GW 3/4" BSP, hose 5/8", cone 60°, AISI 316	16	350	In stock	Enquiry
TI-ZBW110-12-12-SS-PH	End. GW 3/4" BSP, hose 3/4", cone 60°, AISI 316	20	350	In stock	Enquiry
TI-ZBW110-12-16-SS-PH	End. GW 3/4" BSP, hose 1", cone 60°, AISI 316	25	280	In stock	Enquiry
TI-ZBW110-16-12-SS-PH	End. GW 1" BSP, hose 3/4", cone 60°, AISI 316	20	280	In stock	Enquiry
TI-ZBW110-16-16-SS-PH	End. GW 1" BSP, hose 1", cone 60°, AISI 316L	25	280	In stock	Enquiry
TI-ZBW110-16-20-SS-PH	End. GW 1" BSP, hose 1.1/4", cone 60°, AISI 316	32	210	In stock	Enquiry
TI-ZBW110-20-12-SS-PH	End. GW 1.1/4" BSP, hose 3/4", cone 60°, AISI 316	20	210	In stock	Enquiry
TI-ZBW110-20-16-SS-PH	End. GW 1.1/4" BSP, hose 1", cone 60°, AISI 316	25	210	In stock	Enquiry
TI-ZBW110-20-20-SS-PH	End. GW 1.1/4" BSP, hose 1.1/4", cone 60°, AISI 316	32	210	In stock	Enquiry
TI-ZBW110-24-20-SS-PH	End. GW 1.1/2" BSP, hose 1.1/4", cone 60°, AISI 316	32	185	In stock	Enquiry
TI-ZBW110-24-24-SS-PH	End. GW 1.1/2" BSP, hose 1.1/2", cone 60°, AISI 316	38	185	In stock	Enquiry
TI-ZBW110-32-24-SS-PH	End. GW 2" BSP, hose 1.1/2", cone 60°, AISI 316	38	175	In stock	Enquiry
TI-ZBW110-32-32-SS-PH	End. GW 2" BSP, hose 2", cone 60°, AISI 316	50	175	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, 60° sealing cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.