Can the FINN-POWER P20 X press brake be fitted with interchangeable jaw sets to cover crimp diameters from 10 to 61 mm?

Yes. The FINN-POWER P20 X press brake can be fitted with interchangeable jaw sets. All FINN-POWER crimping presses are adapted for use with interchangeable jaws (ordered separately). To cover a crimp diameter range from 10 to 61 mm you would order 12 sets of standard jaws (FP-20-10 through FP-20-54). The P20 X can also be equipped with a base or a rack with sockets and a magnetic holder for quick jaw storage and exchange.

Does the FINN-POWER P20 X press brake support both 230 V single-phase and 400 V three-phase motors?

Yes. The FINN-POWER P20 X press brake supports two motor supply variants: 230 V single-phase (1.5 kW) and 400 V three-phase (2.2 kW).

Is the FINN-POWER P20 X press brake suitable for unit production of hydraulic hoses up to 1.1/2"?

Yes. The FINN-POWER P20 X press brake is explicitly designed for unit production of hydraulic hoses with an internal diameter up to 1.1/2". It is a basic stationary crimping press for workshops and small plants, optimized for individual hose production. Key suitability points: - Capacity: Supports hoses up to 1.1/2" ID. - Production type: Intended for unit (individual) production. - Power options: Single-phase 230 V/1.5 kW or three-phase 400 V/2.2 kWâsuitable for small-scale workshop use. - Accuracy and control: Micrometric knob with 0.01 mm setting accuracy and optical LED indicator that stops jaws when the set crimp diameter is reachedâgood for consistent, repeatable crimps. - Flexibility: Uses interchangeable jaw sets (ordered separately) covering crimp diameters from 10 to 61 mm (12 standard sets FP-20-10 to FP-20-54), and can be fitted with a base or rack and magnetic jaw holder for quick changes. If your production requires occasional single-piece or small-batch hose assembly up to 1.1/2", the FINN-POWER P20 X press brake is suitable. For high-volume, continuous production you may want a more industrial, automated solution.

Crimping press FINN-POWER P20 X

Additional information

Crimping press P20 X to basic stationary device for workshops and small plants, producing lines hydraulic o diameter internal for 1.1/2”. press with simplified system hydraulic, intended is for performing single lines (production unit). Powered is motor electric occurring in two variants supply: 1 phase 230 V o power 1.5 kW and 3 phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp adjustable is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or Hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FP-P20X-230V	Prasa clamping FINN POWER type P20 X (230V 1-faz.)	-	-	In stock	0 zł		Enquiry
FP-P20X-400V	Prasa clamping FINN POWER type P20 X (400V 3-faz.)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Crimping press P20 X to basic stationary device for workshops and small plants, producing lines hydraulic o diameter internal for 1.1/2”. press with simplified system hydraulic, intended is for performing single lines (production unit). Powered is motor electric occurring in two variants supply: 1 phase 230 V o power 1.5 kW and 3 phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp adjustable is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or Hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.