Is the DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) compatible with hoses requiring crimping sleeves marked â-PHâ?

Yes. The DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) is compatible with hoses requiring crimping sleeves marked â-PHâ. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve and specifies suitability for hose types that require sleeves additionally marked with the letters â-PHâ at the end of the index.

Can DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) be used with hoses needing an O-ring seal on a 24Â° cone?

Yes. DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) Format is designed to seal with an O-ring on a 24Â° cone (DKOS) and is intended for crimping to hydraulic/industrial hoses using a crimping sleeve. For hoses requiring an O-ring seal on a 24Â° cone, use the matching crimping sleeves marked with the suffix â-PHâ to ensure compatibility and correct installation.

Can DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) be crimped with standard industrial hose sleeves?

Yes. DKOS 90Â° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH) can be crimped with standard industrial hose sleeves, but only with sleeves specifically designated for this material and series. Use crimping sleeves compatible with the heavy-series Z type fittings and ensure the sleeve index ends with â-PHâ (indicates suitability for AISI 316 / PH). Follow the hose manufacturer's recommended sleeve dimensions and crimping parameters for the specific hose type, and use a crimping machine/calibration matched to heavy-series fittings. Also verify proper o-ring installation for the internal metric thread/24Â° cone (DKOS) seal and perform pressure testing after crimping.

DKOS 90° hydraulic end, type ZMW222, heavy series, AISI 316 steel (PH)

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an o-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve, suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW222-14-04-SS-PH	End. 90° G1/2 M14x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW222-16-04-SS-PH	End. 90° G1/2 M16x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW222-16-05-SS-PH	End. 90° G1/2 M16x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW222-18-04-SS-PH	End fitting 90° G1/2 M18x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW222-18-05-SS-PH	End fitting 90° G1/2 M18x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW222-18-06-SS-PH	End. 90° G1/2 M18x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW222-20-04-SS-PH	End. 90° G1/2 M20x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW222-20-05-SS-PH	End fitting 90° G1/2 M20x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW222-20-06-SS-PH	End. 90° GW M20x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW222-20-08-SS-PH	End. 90° G1/2" M20x1.5, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW222-22-06-SS-PH	End fitting 90° female thread M22x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW222-24-06-SS-PH	End. 90° G1 M24x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW222-24-08-SS-PH	End. 90° G 1" M24x1.5, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW222-30-08-SS-PH	End. 90° GW M30x2, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW222-30-10-SS-PH	End fitting 90° female thread M30x2, hose 5/8", 24°, o-ring, heavy, AISI 316	16	-	In stock	Enquiry
TI-ZMW222-30-12-SS-PH	End. 90° G1 M30x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW222-30-16-SS-PH	End. 90° G1 M30x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW222-36-12-SS-PH	End. 90° GW M36x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW222-36-16-SS-PH	End. 90° G1 M36x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW222-42-12-SS-PH	End. 90° G1/2 M42x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW222-42-16-SS-PH	End. 90° GW M42x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW222-52-16-SS-PH	End. 90° G1 M52x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW222-52-20-SS-PH	End fitting 90° G1/2 M52x2, hose 1.1/4", 24°, o-ring, heavy, AISI 316	32	-	In stock	Enquiry
TI-ZMW222-68-24-SS-PH	End fitting 90° G1/2" M68x2, hose 1.1/2", 24°, o-ring, heavy, AISI 316	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an o-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve, suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.