Is the Socket plug (cap) SKV, galvanized steel, type H compatible with standard hydraulic system threads and pressure ratings?

Socket plug (plug) SKV, galvanized steel, type H Format . compatibility depends on its thread type, size and pressure rating, which are not specified in the brief description. As a closing element for hydraulic systems, the plug must match the systemâs thread standard (e.g. BSP, BSPT, NPT, metric) and diameter to ensure proper sealing and mechanical fit. Galvanized steel provides corrosion resistance and adequate strength for many applications, but pressure rating is determined by design (wall thickness, seat design) and must meet or exceed the hydraulic systemâs working pressure and safety margins. Conclusion: Without explicit thread specification and pressure rating, you cannot assume compatibility. Verify the plugâs exact thread standard and size and confirm the manufacturerâs maximum working pressure (and any applicable standards/certifications) before use in a given hydraulic system.

Can Socket plug (plug) SKV, galvanized steel, type H be used as a permanent sealing solution in mobile hydraulic equipment?

Socket plug (plug) SKV, galvanized steel, type H Format is designed as a closing element for hydraulic systems, but galvanized steel plugs are generally intended for temporary or non-critical sealing rather than permanent use in mobile hydraulic equipment. For permanent sealing in mobile applications you need components that resist vibration, pressure cycles, corrosion, and potential mechanical damage; galvanized steel may corrode over time, and the standard SKV plug lacks elastomeric seals and vibration-resistant features typical of permanent hydraulic fittings. Therefore Socket plug (plug) SKV, galvanized steel, type H Format is not recommended as a permanent sealing solution in mobile hydraulic equipment; use purpose-designed, sealed hydraulic plugs or caps (with appropriate materials, seals and certifications) instead.

Can Socket plug (plug) SKV, galvanized steel, type H withstand corrosive hydraulic fluids and additives?

Socket plug (plug) SKV, galvanized steel, type H Format is a simple closing element intended for use in hydraulic systems; its material is specified as galvanized steel. Galvanizing (zinc coating) provides basic corrosion resistance against moisture and atmospheric exposure, but it is not a chemical-proof lining. Whether Socket plug (plug) SKV, galvanized steel, type H Format can withstand corrosive hydraulic fluids and aggressive additives depends on the specific fluid chemistry, concentration, temperature and operating conditions. General guidance: - For mineral-oil-based hydraulic fluids with common additives (antiwear, antioxidant, antifoam) and normal operating temperatures, a galvanized-steel plug will typically perform acceptably for standard service, though long-term exposure, elevated temperatures or presence of water can accelerate zinc corrosion. - For fluids containing strong acids, alkalis, chlorinated solvents, phosphate esters, glycols, or aggressive water-glycol mixes, or for systems with corrosive additives (e.g., some fire-resistant fluids, biocides, or high-concentration detergents), zinc galvanizing can be attacked, leading to coating breakdown, underfilm corrosion and possible failure. - Elevated temperatures, pressure cycling and mechanical wear (e.g., abrasive particles) also reduce protective effectiveness of the galvanized layer. Recommendation: - Verify the exact hydraulic fluid type and additive package and consult compatibility data for zinc or galvanized steel. If the fluid is aggressive or if long-term corrosion resistance is required, consider stainless steel or a plug with an appropriate corrosion-resistant coating/material. - For critical applications, perform supplier confirmation or testing under expected operating conditions. Conclusion: Socket plug (plug) SKV, galvanized steel, type H Format may be suitable for many standard mineral-oil hydraulic fluids and mild additive packages, but it is not generally recommended for corrosive fluids or aggressive additives without compatibility verification or use of a more corrosion-resistant material.

Socket plug (plug) SKV, galvanized steel, type H

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	4

Socket plug (cap) SKV, as a closing element, for use in hydraulic systems. Material: galvanized steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SKV-M-H-12	SKV type H 3/4 socket plug	-	500	In stock	Enquiry
TI-SKV-M-H-16	SKV type H 1 socket plug	-	500	In stock	Enquiry
TI-SKV-M-H-20	SKV type H 1.1/4 socket plug	-	450	In stock	Enquiry
TI-SKV-M-H-24	SKV type H 1.1/2 socket plug	-	450	In stock	Enquiry
TI-SKV-M-H-32	SKV type H 2"" socket plug	-	420	In stock	Enquiry