Is the Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S compatible only with the supplierâs NON SKIVE fittings?

Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S Format Yes. According to the product description, the ONE SKIVE clamp sleeve is explicitly specified for use only with the appropriate NON SKIVE hydraulic fittings from the same supplier. That means the Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S is compatible exclusively with the supplierâs NON SKIVE fittings and should not be used with other manufacturersâ skive or non-skive fittings.

Can the Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S be used with other NON SKIVE fittings from different suppliers?

No. The Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S is designed to be used only with the appropriate NON SKIVE hydraulic fitting from the same supplier. Using it with NON SKIVE fittings from other suppliers may result in improper fit, sealing failure, or compromised performance because dimensional tolerances, surface finishes and fitment standards can differ between manufacturers. For reliable and safe operation, match the collet with the supplier-specific NON SKIVE fitting it was designed for.

Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S

Q: Does the Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S require the supplierâs matching NON SKIVE sleeve?

Yes. The Collet for hydraulic hoses 4SP, 4SH, R12, R13, R15, carbon steel, type N4S requires the supplierâs matching NON SKIVE sleeve. The product description specifies âUse only with the appropriate NON SKIVE hydraulic fitting from the same supplier,â meaning the collet is designed to be used with the supplierâs NON SKIVE sleeve and compatible NON SKIVE fittings to ensure proper assembly, sealing and performance.

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

ONE SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R12, R13, and R15. Use only with the appropriate NON SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-N4S-12	ONE SKIVE sleeve for hose 4SP/4SH/R12/R13/R15 3/4"	20	-	In stock	Enquiry
TI-N4S-16	ONE SKIVE sleeve for hose 4SP/4SH/R12/R13/R15 1"	25	-	In stock	Enquiry
TI-N4S-20	ONE SKIVE sleeve for hose 4SH/R12 1.1/4"	32	-	In stock	Enquiry
TI-N4S-24	ONE SKIVE sleeve for hose 4SH/R12 1.1/2"	38	-	In stock	Enquiry
TI-N4S-32	ONE SKIVE sleeve for hose 4SH/R12 2"	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ONE SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R12, R13, and R15. Use only with the appropriate NON SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.