Is the ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 suitable for wastewater and groundwater drainage at pressures up to 19 bar and temperatures -20Â°C to +50Â°C?

Yes. The ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 is suitable for wastewater and groundwater drainage at pressures up to 19 bar and temperatures from â20Â°C to +50Â°C. The product description explicitly lists groundwater drainage and wastewater treatment/sewage discharge among its applications, specifies galvanized steel construction, and states a working pressure range from 5 to 19 bar (depending on connector size) and an operating temperature range of â20Â°C to +50Â°C. Ensure you select the appropriate connector size rated for the required pressure and verify compatibility with your systemâs flange dimensions and local standards prior to installation.

Can ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 be used across agriculture, construction and environmental applications at 5â19 bar and -20Â°C to +50Â°C?

Yes. ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 is specified for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge and environmental protection. Its material (galvanized steel), working pressure range (5â19 bar depending on size) and operating temperature range (-20Â°C to +50Â°C) match the listed application environments, so it can be used across agriculture, construction and environmental applications within those pressure and temperature limits.

Can ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 handle corrosive agricultural and industrial wastewater at 5â19 bar?

Yes. ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 is suitable for handling corrosive agricultural and industrial wastewater within the specified operating ranges. The product description explicitly lists wastewater treatment plants, sewage discharge and environmental protection among intended applications, and its material (galvanized steel) provides general corrosion resistance. Its rated working pressure range (5â19 bar depending on connector size) and operating temperature range (â20 Â°C to +50 Â°C) match the conditions you noted. Caveats: suitability depends on the specific chemical composition and concentration of the wastewater. Galvanized steel resists many common agricultural and municipal wastewaters but can be attacked by strong acids, strong alkalis, high chloride/brine content, or certain aggressive industrial chemicals. For highly corrosive media, higher-resistance materials (stainless steel, special alloys, or polymer linings) or additional protective measures may be required. Also ensure the connector size chosen supports the required pressure (verify the exact 5â19 bar rating for that size) and check compatibility of seals and any gaskets with the wastewater chemistry. Conclusion: For typical agricultural and industrial wastewater within common contamination levels, ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46 is appropriate, provided the fluid chemistry is not strongly aggressive and the chosen size meets the needed pressure rating.

ANFOR lever connector plug with PN 10 flange, galvanized steel, type A.46

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10

ANFOR lever connector with flange PN 10 for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A46-060-065	ANFOR plug 60 mm, flange PN10 / DN65, galvanized steel.	-	19	In stock	Enquiry
OM-A46-080-080	ANFOR plug 80 mm, flange PN10 / DN80, galvanized steel.	-	16	In stock	Enquiry
OM-A46-100-100	ANFOR plug 100 mm, flange PN10 / DN100, galvanized steel.	-	14	In stock	Enquiry
OM-A46-120-125	ANFOR plug 120 mm, flange PN10 / DN125, galvanized steel.	-	13	In stock	Enquiry
OM-A46-150-150	ANFOR plug 150 mm, flange PN10 / DN150, galvanized steel.	-	12	In stock	Enquiry
OM-A46-200-200	ANFOR plug 200 mm, flange PN10 / DN200, galvanized steel.	-	6	In stock	Enquiry
OM-A46-250-250	ANFOR plug 250 mm, flange PN10 / DN250, galvanized steel.	-	5	In stock	Enquiry
OM-A46-300-300	ANFOR plug 300 mm, flange PN10 / DN300, galvanized steel.	-	5	In stock	Enquiry
OM-A46-400-400	ANFOR plug 400 mm, flange PN10 / DN400, galvanized steel.	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ANFOR lever connector with flange PN 10 for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.