Is the Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 suitable for medical and gas detection applications and does the audible click guarantee a secure seal under up to 8.3 bar?

Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 appears to be designed for the listed applications . gas detection, medical devices, chemical analyzers, inkjet printing and optical equipment . so it is suitable for use in medical and gas detection applications provided the rest of the system and local regulations are met. Key supporting features: polypropylene body, EPDM Oâring sealing, and rated working pressure up to 8.3 bar with operating temperature 0Â°C to +71Â°C. The audible click is an indicator that the connector has engaged, but the click alone does not guarantee a secure, leakâfree seal under pressure. Proper seal reliability depends on correct installation, Oâring condition, valve integrity, and compatibility with the media and sterilization/cleaning processes used in medical or gas detection systems. For safetyâcritical applications you should verify: compatibility with the specific gases/fluids, conformity to relevant medical and gas safety standards, pressure testing at application conditions, and routine inspection/maintenance procedures. In summary: Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 is suitable in principle for medical and gas detection uses and the audible click indicates engagement, but do not rely on the click alone . validate sealing performance by testing and compliance checks for your specific application.

Can Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 be used safely in inkjet printing and chemical analyzers at temperatures up to +71Â°C?

Yes. Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 can be used safely in inkjet printing and chemical analyzers at temperatures up to +71Â°C, based on the provided description. The product is explicitly intended for applications including inkjet printing and chemical analyzers, its operating temperature range is 0Â°C to +71Â°C, and its materials (polypropylene body with EPDM Oâring) are compatible with many inks and common analytical fluids. Working pressure up to 8.3 bar and an audible click confirm reliable sealing. Ensure compatibility with the specific fluids and any solvents used in your process (EPDM has limited chemical resistance to some solvents) and validate in your actual operating conditions before full deployment.

Does the Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 use EPDM o-rings compatible with all common process gases and fluids?

Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 uses an EPDM o-ring for sealing. EPDM (ethylene propylene diene monomer) offers good compatibility with many common gases and aqueous fluids. including water, steam, hot and cold potable water, many alcohols, glycols, and some dilute acids and bases. However, EPDM is not compatible with many hydrocarbons, aromatic solvents, ketones (e.g., acetone), chlorinated solvents, oils, fuels, and many aggressive organic chemicals. Given typical applications listed (gas detection, medical devices, chemical analyzers, inkjet printing, optical equipment), EPDM is suitable for many sensing and aqueous/air gas uses but may be unsuitable where hydrocarbons, oils, fuels, or aggressive organic solvents are present. Also note the deviceâs stated operating temperature range (0Â°C to +71Â°C) and working pressure (up to 8.3 bar), which affect seal performance. Conclusion: Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2 uses EPDM o-rings that are compatible with many common process gases and aqueous fluids, but not universally compatible. avoid use with hydrocarbons, oils, fuels, ketones, chlorinated solvents, and other incompatible chemicals. For critical or unknown media, consult chemical compatibility charts or the manufacturer for confirmation.

Hose quick connect plug with nut and valve, polypropylene, PMC series DN 3.2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Quick-connect plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] – total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-PMV-29-PP	PMC DN3.2 plug for hose 6.4x4.3 with nut, with valve, polypropylene	4	8.3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick-connect plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] – total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.