Can the Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series be mounted in any position without affecting its 3/2 NO/NC function or nominal flow?

Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series can be mounted in any position without affecting its 3/2 NO/NC function or nominal flow. The product description for the mechanically controlled mini mushroom valve specifies that it "can be mounted in any position." Materials, sealing and spring design (aluminum body, NBR seals, stainless steel springs) and the mechanical actuation means ensure consistent operation across orientations. Nominal flow (60 l/min at 6 bar Îp = 1 bar), operating pressure (0.5â10 bar), and 3/2 NO/NC function are therefore not compromised by mounting position, provided installation and actuation clearances follow manufacturer guidance.

Can the Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series be used reliably at temperatures between -10Â°C and +60Â°C without performance loss?

Yes. The Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series specifies an operating temperature range of -10Â°C to +60Â°C in its description, and its materials (aluminum body, nickel-plated brass push rod, NBR seals, stainless steel springs) are compatible with that range. Therefore it can be used reliably between -10Â°C and +60Â°C without expected loss of performance, provided other system conditions (pressure 0.5â10 bar, media compatibility, and required flow/actuation force) are met.

Does the Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series require lubrication for reliable long-term operation?

Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series does not require routine lubrication for reliable long-term operation under normal conditions. The construction materialsâaluminum body, nickel-plated brass push rod, NBR seals and stainless steel springsâare selected for durability and low friction. NBR seals are preconditioned for typical pneumatic systems and the moving parts are minimal (push rod, internal spool/seat and springs), so standard factory assembly is normally sufficient. Recommended considerations: - Operate within specified ranges (0.5â10 bar, â10Â°C to +60Â°C) to avoid accelerated wear of seals and materials. - Avoid contamination (dirt, oil, particulates) in the compressed air; use proper filtration and dryer to extend seal life and reliable switching. - If the service environment includes aggressive media, extreme temperatures, or frequent high-cycle operation, periodic inspection is advisable; in such cases a light, compatible pneumatic lubricant applied to incoming air (not direct internal greasing) can help but must be compatible with NBR seals. - Do not use lubricants containing solvents or incompatible additives that degrade NBR or compromise spring/metal surfaces. In summary: no routine external lubrication is required for Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series under intended operating conditionsâfocus on clean, dry compressed air and adherence to pressure/temperature limits; apply compatible lubrication only if specific adverse conditions or manufacturer guidance indicate necessity.

Mini-splitting valve, pneumatic, mechanically operated, 3/2, VME series

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10
Standard length [m]	15

Mini mushroom valve, mechanically controlled, commonly used for controlling actuator operation. It can be mounted in any position. A small force is required to actuate the valve. Function 3/2 NO and NC – three flow paths, two positions. Connection: GW M5, plug-in connection Ø4 and Ø6 (axial or side). Actuation: push rod, panel-mounted push rod, lever with roller, lever with single-acting roller. Material: valve body – aluminum, push rod – nickel-plated brass, sealing – NBR, springs – stainless steel. Nominal flow: 60 l/min (at input pressure 6 bar Δp = 1 bar). Actuation force (push rod at 6 bar): 8 N. Operating pressure: from 0.5 to 10 bar. Operating temperature: -10°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W3501000100	VME1 valve, 3/2 NC, actuator, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000101	VME1 valve, 3/2 NO, actuator, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000110	VME1 valve, 3/2 NO, actuator, 2 x G thread M5	-	10	In stock	Enquiry
MW-W3501000111	VME1 valve, 3/2 NC, actuator, 2 x G thread M5	-	10	In stock	Enquiry
MW-W3501000130	VME1 valve, 3/2 NO, actuator, 2 x 6 mm hose	-	10	In stock	Enquiry
MW-W3501000131	VME1 valve, 3/2 NC, actuator, 2 x 6 mm hose	-	10	In stock	Enquiry
MW-W3501000200	VME1 valve, 3/2 NC, lever with roller, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000201	VME1 valve, 3/2 NO, lever with roller, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000210	VME1 valve, 3/2 NO, lever with roller, 2 x G thread M5	-	10	In stock	Enquiry
MW-W3501000211	VME1 valve, 3/2 NC, lever with roller, 2 x G thread M5	-	10	In stock	Enquiry
MW-W3501000300	VME1 valve, 3/2 NC, lever with pivoting roller, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000311	VME1 valve, 3/2 NC, lever with pivoting roller, 2 x G thread M5	-	10	In stock	Enquiry
MW-W3501000400	VME1 valve, 3/2 NC, panel-mounted, push-button, 2 x 4 mm hose	-	10	In stock	Enquiry
MW-W3501000411	VME1 valve, 3/2 NC, panel-mounted, push button, 2 x G1/8 M5	-	10	In stock	Enquiry
MW-W3501001100	VME2 valve, 3/2 NO, actuator, 2 x 4 mm hose from the side	-	10	In stock	Enquiry
MW-W3501001101	VME2 valve, 3/2 NC, actuator, 2 x 4 mm hose on the side	-	10	In stock	Enquiry
MW-W3501001110	VME2 valve, 3/2 NO, actuator, 2 x G-thread M5 on the side	-	10	In stock	Enquiry
MW-W3501001111	VME2 valve, 3/2 NC, actuator, 2 x G1/8 M5 on the side	-	10	In stock	Enquiry
MW-W3501001200	VME2 valve, 3/2 NO, lever with roller, 2 x 4 mm hose on the side	-	10	In stock	Enquiry
MW-W3501001201	VME2 valve, 3/2 NC, lever with roller, 2 x 4 mm hose on the side	-	10	In stock	Enquiry
MW-W3501001210	VME2 valve, 3/2 NO, lever with roller, 2 x G1/8 on the side	-	10	In stock	Enquiry
MW-W3501001211	VME2 valve, 3/2 NC, lever with roller, 2 x G1/8 on the side	-	10	In stock	Enquiry
MW-W3501001301	VME2 valve, 3/2 NC, lever with pivot roller, 2 x 4 mm hose on the side	-	10	In stock	Enquiry
MW-W3501001311	VME2 valve, 3/2 NC, lever with pivoting roller, 2 x G M5 on the side	-	10	In stock	Enquiry
MW-W3501001401	VME2 valve, 3/2 NC, panel-mounted, push rod, 2 x 4 mm hose on the side	-	10	In stock	Enquiry
MW-W3501001411	VME2 valve, 3/2 NC, panel-mounted, push rod, 2 x G M5 on the side	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Mini mushroom valve, mechanically controlled, commonly used for controlling actuator operation. It can be mounted in any position. A small force is required to actuate the valve. Function 3/2 NO and NC – three flow paths, two positions. Connection: GW M5, plug-in connection Ø4 and Ø6 (axial or side). Actuation: push rod, panel-mounted push rod, lever with roller, lever with single-acting roller. Material: valve body – aluminum, push rod – nickel-plated brass, sealing – NBR, springs – stainless steel. Nominal flow: 60 l/min (at input pressure 6 bar Δp = 1 bar). Actuation force (push rod at 6 bar): 8 N. Operating pressure: from 0.5 to 10 bar. Operating temperature: -10°C to +60°C.