Is the Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 suitable for autoclaving and repeated sterilization without losing sealing or mechanical performance?

Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 Format is described as suitable for autoclaving. Its body of UV polysulfone and EPDM sealing, high mechanical strength, chemical resistance and stated operating temperature range (â40Â°C to +138Â°C) support use in repeated sterilization cycles. Polysulfone is commonly autoclave-compatible and EPDM tolerates steam sterilization; the productâs explicit note âSuitable for autoclavingâ indicates it was designed for that purpose. Caveats: repeated autoclaving can, over long-term use, affect polymer components depending on cycle temperature, pressure, exposure time, sterilization chemistry (pure steam vs. steam with chemicals) and mechanical wear. To minimize risk of loss of sealing or mechanical performance, follow manufacturer-recommended autoclave parameters (temperature, pressure, cycle duration), avoid aggressive sterilants not specified by the maker, inspect seals and coupling function periodically, and replace EPDM seals if any degradation appears. Under normal recommended autoclave conditions, the Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 Format should maintain sealing and mechanical performance.

Can Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 withstand exposure to aggressive chemicals without degrading seals or mechanical integrity?

Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 Format: Yes - this coupling is designed for chemical and photographic processes and is specified as having high chemical resistance and EPDM seals. Material (UV polysulfone) and stated chemical resistance, suitability for autoclaving, wide temperature range (â40Â°C to +138Â°C) and working pressure up to 8.6 bar indicate it will withstand many aggressive chemicals without degrading seals or mechanical integrity. Limitations: EPDM seals are not compatible with strong ketones, some aggressive hydrocarbons, and certain oils and solvents; polysulfone can be attacked by strong acids, bases and some solvents. For specific aggressive chemicals, validate compatibility with EPDM and polysulfone using chemical-resistance charts or supplier data.

Can the Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 be used with potable water and food-contact applications?

Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 Format: based on the provided description, this coupling is designed for water, chemical and pneumatic installations, is made of UV-stable polysulfone, uses EPDM seals, is autoclaveable, resistant to chemicals, and rated to â40Â°Câ¦+138Â°C and up to 8.6 bar. However, the description does not explicitly state compliance with potable-water standards (e.g. NSF/ANSI 61, WRAS, ACS) or food-contact regulations (e.g. FDA 21 CFR, EU 1935/2004). Polysulfone and EPDM can be formulated for food-contact in many cases, but regulatory approval depends on specific raw-material grades, manufacturing controls and certification from the manufacturer. Conclusion: Technically the materials and temperature/pressure ratings could be compatible with potable water and some food-contact uses, but you must obtain written confirmation or relevant certification from the manufacturer (material declarations, NSF/WRAS/ACS/FDA compliance as required in your jurisdiction) before using Hose quick-connection socket, UV polysulfone, HFC series DN 12.7 in potable water or food-contact applications.

Hose quick-connection socket, UV polysulfone, HFC series DN 12.7

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Quick coupling socket with hose end, with and without shut-off valve, resistant to ultraviolet radiation, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] – total length. Material: UV polysulfone. Sealing: EPDM. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CC-HFV-12-PSU	HFC socket DN12.7 for 3/8" hose, with valve, polysulfone UV	10	8.6	In stock	Enquiry
CC-HFV-13-PSU	HFC socket DN12.7 for 1/2" hose, with valve, polysulfone UV	12	8.6	In stock	Enquiry
CC-HFV-14-PSU	HFC socket DN12.7 for 5/8" hose, with valve, polysulfone UV	16	8.6	In stock	Enquiry
CC-HFV-15-PSU	HFC socket DN12.7 for 3/4" hose, with valve, polysulfone UV	20	8.6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket with hose end, with and without shut-off valve, resistant to ultraviolet radiation, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] – total length. Material: UV polysulfone. Sealing: EPDM. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.