Can the Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2 withstand continuous operation at pressures up to 6.9 bar and temperatures between -40Â°C and +82Â°C?

Yes. The Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2 is specified for working pressures up to 6.9 bar and an operating temperature range of -40Â°C to +82Â°C. Based on the provided description . acetal material, intended applications (inkjet printing installations, blood, cooling fluids, gas chromatography), and the stated working pressure and temperature limits . it is designed to withstand continuous operation within those specified limits. Ensure installation and system conditions (chemical compatibility, mechanical stresses, cyclic loading) do not exceed those ratings for safe long-term use.

Is the Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2 suitable for inkjet and blood applications?

Yes. The Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2 is suitable for inkjet and blood applications. It is specifically intended for inkjet printing installations and blood, compatible with cooling fluids and gas chromatography. Its acetal construction, DN 1.2 mm size, one-handed twist-to-connect design with audible click ensures secure connection. Operating range (â40Â°C to +82Â°C) and working pressure up to 6.9 bar are appropriate for typical inkjet and many blood-handling scenarios; confirm chemical compatibility and any regulatory/sterility requirements specific to your application before use.

Does the Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2 require special cleaning for blood or inkjet use?

Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2. does it require special cleaning for blood or inkjet use? Yes. special cleaning and handling are recommended. Reasons and guidance: - Material and intended use: The connector is made of acetal and is specified for inkjet printing installations, blood, cooling fluids, gas chromatography, etc., which implies it can be used in such applications but may not be delivered in a sterile or contamination-free state. - Blood use: If the connector is to contact blood or be used in clinical/diagnostic workflows, strict cleaning, disinfection and usually sterilization protocols are required to meet biocompatibility and infection-control standards. Acetal can tolerate common sterilization methods (e.g., some chemical disinfectants, low-temperature processes), but compatibility and validation must be confirmed for your specific sterilization method. Avoid aggressive high-temperature steam autoclaving unless manufacturer data confirm suitability. - Inkjet use: For inkjet fluids, cleaning to remove manufacturing residues, dust or lubricants is recommended to prevent nozzle clogging or contamination of inks. Typical procedures include thorough flush with compatible solvents or deionized water, then drying. Ensure solvent compatibility with acetal. - Validation: Follow application-specific regulatory or process requirements (medical device standards for blood; OEM ink/printhead guidelines for inkjet). Validate that cleaning/sterilization does not degrade seal performance, dimensions or pressure rating (up to 6.9 bar) and that the characteristic click/one-handed operation remains reliable. - Practical steps: Consult SMC technical documentation or supplier for recommended cleaning agents and sterilization methods for this acetal part; perform compatibility tests; use clean assembly environments and, for blood, consider single-use or certified sterile components when required. If you need, I can draft a brief validated cleaning protocol outline for either blood or inkjet applications.

Quick connector socket with GZ NPT, without valve, acetal, SMC series DN 1,2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Quick coupling socket with external NPT thread, without valve, intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting two parts of the coupling relative to each other. Their design allows for easy one-handed operation, and the characteristic click ensures a secure connection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] – total length. Material: acetal. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-SMX-01-AC	SMC socket DN1.2 with GZ 1/8" NPT, without valve, acetal	-	6.9	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket with external NPT thread, without valve, intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting two parts of the coupling relative to each other. Their design allows for easy one-handed operation, and the characteristic click ensures a secure connection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] – total length. Material: acetal. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.