How does the Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates, operate to vent the system while isolating supply air for maintenance?

The Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates operates as a normally closed, three-way valve that isolates supply air and vents the system simultaneously for safe maintenance. In its closed position the valve blocks the supply air path while opening a vent path to atmosphere or a drain, allowing trapped pressure in the downstream system to be released. This dual action ensures the working system is depressurized and separated from the supply source before maintenance begins. The valve is sized for 100, handles supply pressures up to 10 bar, operates up to +50Â°C, and provides a flow rate of 1650 l/min at 6 bar inlet pressure with Îp = 1 bar.

What maintenance procedures require using the Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates to isolate and vent the system?

Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates should be used to isolate and vent the system during maintenance procedures that require cutting off supply air and depressurizing the working system, such as: routine inspection and servicing of downstream pneumatic components (actuators, cylinders, valves), replacement or repair of system tubing and fittings, safe removal or maintenance of sensors and instruments, cleaning or flushing of pneumatic lines, and any task requiring complete depressurization to prevent accidental movement or contamination. Its normally closed, three-way design simultaneously blocks supply air and vents the system, ensuring safe working conditions at supply pressures up to 10 bar and operating temperatures up to +50Â°C.

Can the Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates be remotely monitored for venting status?

Yes. The Electric shut-off valve, V3V 100 series SKILLAIRÂ®, without end plates can be remotely monitored for venting status if fitted with appropriate position feedback or status-sensing accessories (e.g., limit switches, position sensors, or integrated electronic feedback modules) and connected to a monitoring/control system. The valve is a normally closed, three-way device that, in its closed position, cuts off the supply air while simultaneously venting the systemâthis defined venting action provides a clear binary state (venting vs. supplying) that can be detected by sensors. To achieve reliable remote monitoring you must: - Add a compatible position or status sensor (mechanical limit switches, magnetic sensors, or electronic position transmitters) designed for the valveâs actuator and mounting. - Ensure the sensor and actuator are rated for the valveâs operating conditions (supply pressure up to 10 bar, operating temperature up to +50Â°C). - Integrate the sensor outputs into your control/SCADA/BMS via suitable wiring, I/O modules, or fieldbus gateways to report the venting state. - Verify installation and calibration so the reported sensor state corresponds accurately to the valveâs closed (venting) and open (supplying) positions. Without such sensors or feedback-equipped actuators, the valve itself does not inherently provide remote venting-status signals.

Valve shut-off electric, V3V 100 series SKILLAIR®, without plates end

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

Valve shut-off V3V electric, series SKILLAIR®, without plates end, serves for separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-3269001A	Shut-off valve elektryczny V3V ELPN 2W 100 (SKILLAIR) without end plates	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Valve shut-off V3V electric, series SKILLAIR®, without plates end, serves for separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).