Is the Polyurethane hose for road sweepers P7 M STREET suitable for suctioning abrasive materials like sand and gravel at temperatures down to -40Â°C?

Yes. Polyurethane hose for road sweepers P7 M STREET is suitable for suctioning abrasive materials like sand and gravel at temperatures down to -40Â°C. Its strong, thick (1.4 mm) polyetherâpolyurethane wall, steel wire spiral reinforcement, excellent abrasion resistance and smooth low-compressible interior make it appropriate for sand, gravel and similar contaminants. The hose remains elastic at low temperatures (operating range â40Â°C to +100Â°C, temporarily up to +125Â°C), has reduced wear at bends due to outward-turned folds, and is resistant to microbes, hydrolysis, oils and gasoline.making it well suited for road-sweeper suction duties in cold conditions.

Can the Polyurethane hose for road sweepers P7 M STREET be safely used with oils, gasoline and microbial-exposed waste during prolonged outdoor service?

Polyurethane hose for road sweepers P7 M STREET can be safely used with oils, gasoline and microbial-exposed waste during prolonged outdoor service. Its polyetherâpolyurethane composition is stated as resistant to oils and gasoline, and the hose is described as resistant to microbes and hydrolysis. Additional benefits for outdoor, long-term use include strong, thick walls with steel wire spiral reinforcement, low compressibility, elasticity from â40Â°C to +100Â°C (temporary to +125Â°C), good abrasion resistance, and non-toxic, halogen- and plasticizer-free construction. Ensure correct installation with bridge clamps and verify any specific chemical compatibility or regulatory requirements for your application.

Does the Polyurethane hose for road sweepers P7 M STREET require special clamps or fittings for secure installation on sweepers?

Polyurethane hose for road sweepers P7 M STREET requires installation on fittings with bridge clamps (right-handed). Its constructionâsteel wire spiral, thick wall (1.4 mm) and reduced bending radiusâcalls for secure, non-slip clamping; the manufacturer specifies bridge clamps to ensure proper sealing and mechanical retention. For other diameters or special applications, confirm with the supplier whether alternate clamp types or fittings are recommended.

Polyurethane hose for road sweepers P7 M STREET

All products, Ducting and ventilation hoses/

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 50
Reinforcement	steel spiral

Strong, thick, flexible hose designed for suction and transport of abrasive materials: sand, gravel, debris, leaves, and other contaminants. Intended for use in street, square, and road cleaning. Used in sweepers and other municipal and road service equipment. The special design of the P7 M STREET hose ensures that despite its large wall thickness (1.4 mm), it has a smaller bending radius (1.2 x D) than standard hoses of this thickness. The folds of the hose between the spiral at the bend turn outward, reducing flow resistance and wear. Flexible, low-compressible, smooth inside, and elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Wall thickness is measured between the spiral. Installation on fittings with bridge clamps (right-handed). Other diameters may be available upon special request. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SC-P7M-STREET-181	Hose P7 M STREET 181.5 mm	180	0.3	In stock	Enquiry
SC-P7M-STREET-190	Hose P7 M STREET 190 mm	180	0.3	In stock	Enquiry
SC-P7M-STREET-200	Hose P7 M STREET 200 mm	200	0.3	In stock	Enquiry
SC-P7M-STREET-205	Hose P7 M STREET 205 mm	200	0.3	In stock	Enquiry
SC-P7M-STREET-250	Hose P7 M STREET 250 mm	250	0.25	In stock	Enquiry
SC-P7M-STREET-257	Hose P7 M STREET 257 mm	250	0.25	In stock	Enquiry
SC-P7M-STREET-300	Hose P7 M STREET 300 mm	300	0.2	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Strong, thick, flexible hose designed for suction and transport of abrasive materials: sand, gravel, debris, leaves, and other contaminants. Intended for use in street, square, and road cleaning. Used in sweepers and other municipal and road service equipment. The special design of the P7 M STREET hose ensures that despite its large wall thickness (1.4 mm), it has a smaller bending radius (1.2 x D) than standard hoses of this thickness. The folds of the hose between the spiral at the bend turn outward, reducing flow resistance and wear. Flexible, low-compressible, smooth inside, and elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Wall thickness is measured between the spiral. Installation on fittings with bridge clamps (right-handed). Other diameters may be available upon special request. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 50
Reinforcement	steel spiral