Is the 45Â° INTERLOCK SAE 3000 flange end, carbon steel compatible with hose types 4SH, R13, and R15 when using an O-ring seal or gasket in the groove?

Yes. The 45Â° INTERLOCK SAE 3000 flange end, carbon steel is compatible with hose types 4SH, R13, and R15 when used with an O-ring seal or other gasket seated in the flange groove. The product description explicitly specifies the 45Â° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15, confirming suitability. Ensure correct O-ring/gasket material and groove sealing dimensions match system pressure and fluid to maintain proper sealing and safety.

Does the 45Â° INTERLOCK SAE 3000 flange end, carbon steel, with O-ring in groove fit 4SH, R13, R15 hoses?

Yes. The 45Â° INTERLOCK SAE 3000 flange end, carbon steel with O-ring in groove is designed specifically for hose types 4SH, R13, and R15. It uses an O-ring seal (or other gasket) seated in the flange groove to provide the required sealing for these high-pressure spiral hoses, and the carbon steel, galvanized construction matches typical compatibility and strength requirements for SAE 3000 flange applications. Ensure you select the correct flange size and O-ring material for the operating pressure, fluid type, and temperature of your system for proper fit and reliable sealing.

45° INTERLOCK SAE 3000 flange end, carbon steel

Q: Can a 45Â° INTERLOCK SAE 3000 flange end, carbon steel with O-ring gasket be used with hose types 4SH, R13, and R15?

Yes. A 45Â° INTERLOCK SAE 3000 flange end, carbon steel with an O-ring gasket (or other gasket in the flange groove) is designed for use with hose types 4SH, R13, and R15. The description explicitly states compatibility: 45Â° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Ensure you use the correct O-ring material and size for the fluid, pressure, and temperature conditions, verify SAE 3000 pressure rating matches system requirements, and confirm proper assembly (torque, clean sealing surfaces) to prevent leaks.

All products, Fittings for high-pressure hoses/

45° INTERLOCK SAE 3000 flange end, carbon steel

Additional information

Material	CS – steel (cast iron)

45° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-ILSK311-12-12	End fitting 45° INTERLOCK SAE 3000 3/4", hose 3/4"	20	-
TI-ILSK311-16-12	End fitting 45° INTERLOCK SAE 3000 1", hose 3/4"	20	-
TI-ILSK311-16-16	End fitting 45° INTERLOCK SAE 3000 1", hose 1"	25	-
TI-ILSK311-20-20	End fitting 45° INTERLOCK SAE 3000 1.1/4", hose 1.1/4"	32	-
TI-ILSK311-24-20	End fitting 45° INTERLOCK SAE 3000 1.1/2", hose 1.1/4"	32	-
TI-ILSK311-24-24	End fitting 45° INTERLOCK SAE 3000 1.1/2", hose 1.1/2"	38	-
TI-ILSK311-32-32	End fitting 45° INTERLOCK SAE 3000 2", hose 2"	50	-

45° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.