Can the Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX be installed without machining and fit hoses with specified D1, D2, D3 dimensions?

Yes. The Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX is designed for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT) and can be installed without machining. It uses the specified diameters to ensure a proper fit: D1 is the hose outer diameter, D2 is the hose inner diameter, and D3 is the locking diameter. If your hose dimensions match the corresponding D1, D2 and D3 values for the chosen Z2TX collet, the part will clamp and lock correctly without additional machining. Ensure you select the collet size that corresponds exactly to your hose D1/D2 and verify D3 for proper locking engagement to prevent leakage or slippage.

Is the Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX compatible with hoses having specified D1, D2, D3 without machining?

Yes - the Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX is compatible without machining, provided the hose dimensions match the specified diameters: D1 (hose outer diameter) must fit the sleeveâs D1 spec, D2 (hose inner diameter) must correspond to the sleeveâs D2, and D3 (locking diameter) must match the sleeveâs D3. The product description states Z2TX is for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT) and installation requires no machining, so if your hose D1, D2, D3 fall within the Z2TX specified tolerances, it will be compatible. If any dimension deviates, machining or a different collet size is required.

Does the Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX require any machining for installation on hoses with given D1, D2, D3?

Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX Format No machining is required for installation. The Z2TX clamping sleeve is designed for rubber hydraulic hoses type 1SN (R1AT) and 2SN (R2AT) and installs without any additional machining. Use the specified diameters as follows: D1 = outer diameter, D2 = inner diameter, D3 = locking diameter. Material: carbon steel, galvanized.

Collet for hydraulic hoses 1SN, 2SN, carbon steel, type Z2TX

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Z2TX clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT). Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – locking diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-Z2TX-03	Sleeve for hose 2SN (R2AT) 3/16"	5	-	In stock	Enquiry
TI-Z2TX-04	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 1/4"	6	-	In stock	Enquiry
TI-Z2TX-05	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 5/16"	8	-	In stock	Enquiry
TI-Z2TX-06	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 3/8"	10	-	In stock	Enquiry
TI-Z2TX-08	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 1/2"	12	-	In stock	Enquiry
TI-Z2TX-10	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 5/8"	16	-	In stock	Enquiry
TI-Z2TX-12	Sleeve for hose 1SN (R1AT) / 2SN (R2AT) 3/4"	20	-	In stock	Enquiry
TI-Z2TX-16	Sleeve for hose 2SN (R2AT) 1"	25	-	In stock	Enquiry
TI-Z2TX-20	Sleeve for hose 2SN (R2AT) 1.1/4"	32	-	In stock	Enquiry
TI-Z2TX-24	Sleeve for hose 2SN (R2AT) 1.1/2"	38	-	In stock	Enquiry
TI-Z2TX-32	Sleeve for hose 2SN (R2AT) 2"	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Z2TX clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT). Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – locking diameter. Material: carbon steel, galvanized.