Can NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 be crimped onto 4SP/4SH/R13/R15 hoses using a TI-N sleeve without cutting the hose rubber?

Yes. NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 can be crimped onto 4SP/4SH/R13/R15 hoses using a TI-N sleeve without cutting the hose rubber. The product description for the 90Â° NON SKIVE SUPERCAT flange end (SFC 90) specifies it is designed for crimping on those hose types with a TI-N crimping sleeve and explicitly notes installation without cutting the hose rubber. Ensure correct sleeve size and crimping parameters per manufacturer specifications and verify crimp quality with appropriate gauges or pressure testing after assembly.

Can NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 be installed on 4SP/4SH/R13/R15 hoses with a TI-N crimp sleeve without cutting the hose rubber?

Yes. The NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 can be installed on 4SP/4SH/R13/R15 hoses using a TI-N crimp sleeve without cutting the hose rubber, as the SFC 90 NON SKIVE design and specified TI-N crimping sleeve allow crimping directly over the hose outer cover. Ensure correct sleeve size, proper crimping tool/settings, and follow manufacturer crimp procedure to achieve a secure, leak-free assembly.

Does NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 require hose rubber trimming for TI-N crimping on 4SP/4SH/R13/R15?

No. NON SKIVE SAE SUPERCAT 90Â° flange end, carbon steel, type NSK213 does not require hose rubber trimming for TI-N crimping on 4SP/4SH/R13/R15. According to the product description, the 90Â° NON SKIVE SUPERCAT flange end (SFC 90) is specifically designed for crimping on these hose types using the TI-N crimping sleeve and its installation is performed without cutting the hose rubber. The component is carbon steel, galvanized, and intended for non-skive (no rubber trimming) assembly.

Fitting flange 90° NON SKIVE SAE SUPERCAT, carbon steel, type NSK213

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	2

Fitting flange 90° NON SKIVE SUPERCAT (SFC 90), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N…. Assembly: without skiving gumy hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-NSK213-12-12	Flange fitting 90° NON SKIVE SUPERCAT 3/4", hose 3/4"	20	420	In stock	Enquiry
TI-NSK213-16-12	Flange fitting 90° NON SKIVE SUPERCAT 1", hose 3/4"	20	420	In stock	Enquiry
TI-NSK213-16-16	Flange fitting 90° NON SKIVE SUPERCAT 1", hose 1"	25	415	In stock	Enquiry
TI-NSK213-20-16	Flange fitting 90° NON SKIVE SUPERCAT 1.1/4", hose 1"	25	415	In stock	Enquiry
TI-NSK213-20-20	Flange fitting 90° NON SKIVE SUPERCAT 1.1/4", hose 1.1/4"	32	415	In stock	Enquiry
TI-NSK213-24-20	Flange fitting 90° NON SKIVE SUPERCAT 1.1/2", hose 1.1/4"	32	415	In stock	Enquiry
TI-NSK213-24-24	Flange fitting 90° NON SKIVE SUPERCAT 1.1/2", hose 1.1/2"	38	415	In stock	Enquiry
TI-NSK213-32-32	Flange fitting 90° NON SKIVE SUPERCAT 2", hose 2"	50	345	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting flange 90° NON SKIVE SUPERCAT (SFC 90), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N…. Assembly: without skiving gumy hose. Material: carbon steel, galvanized.