Is the Adaptor with GW BSP, stainless steel, type A105 compatible with fluids at pressures above 600 bar and does the 60Â° cone swivel nut ensure leak-free connection?

Adaptor with GW BSP, stainless steel, type A105 . based on the provided description (high-pressure adaptor type A105 with internal BSP threads, swivel nut with 60Â° cone seal, material AISI 316L) . can be suitable for fluids at pressures above 600 bar only if the specific productâs pressure rating and testing certify that working pressure. AISI 316L offers excellent corrosion resistance and mechanical strength for demanding fluids, and a 60Â° cone swivel nut is a standard metal-to-metal sealing geometry that, when manufactured and assembled correctly, can provide a reliable, leak-tight connection under very high pressures. However, leak-free performance at >600 bar depends on: - the adaptorâs certified maximum working pressure (must be â¥ your operating pressure), - correct thread engagement and torque, appropriate mating counterpart (matching BSP and cone seat dimensions), - surface finish and hardness, and any required sealing procedures (cleanliness, correct alignment), - compatibility of fluid with AISI 316L and any dynamic effects (pressure spikes, vibration, temperature), and - manufacturer testing/certification and applicable standards. Conclusion: The design (AISI 316L + 60Â° cone swivel nut) is appropriate for high-pressure service, but you must confirm the adaptorâs rated working pressure and certifications for >600 bar and ensure proper installation and compatible mating components to guarantee a leak-free connection.

Can the Adaptor with GW BSP, stainless steel, type A105 withstand corrosive fluids and maintain sealing at high temperatures?

Yes. The Adaptor with GW BSP, stainless steel, type A105 is made of AISI 316L, a low-carbon stainless steel with excellent resistance to many corrosive fluids (chlorides, seawater, acids and many process chemicals), so it is suitable for corrosive environments where 316L is compatible. The 60Â° cone swivel-nut seal provides reliable metal-to-metal sealing under high pressure and elevated temperatures; however, maximum temperature and chemical compatibility depend on the specific fluid, pressure, and any seal or gasket materials used in the system. For aggressive chemicals, very high temperatures, or critical leak-tightness requirements, verify service conditions against 316L limits and consult manufacturer data or perform compatibility and pressure-temperature ratings for the assembly before use.

Does the Adaptor with GW BSP, stainless steel, type A105 require specific torque values for the 60Â° cone swivel nut?

Adaptor with GW BSP, stainless steel, type A105 does not include specific torque values for the 60Â° cone swivel nut in the provided description. The data given. "High-pressure adaptor type A105 with internal BSP threads, featuring a swivel nut (60Â° cone seal). Material: AISI 316L steel". identifies geometry, seal type and material but omits assembly torque specifications. Recommendation: - Follow general industry practice for 60Â° cone BSP swivel fittings: apply torque sufficient to compress the cone to form a metal-to-metal seal without deforming components. Typical guidance is to hand-tighten then apply a specified number of wrench flats turns (often 1â2 turns) or use published torque tables from the fitting or equipment manufacturer. - For safety and leak-free performance, obtain and use the torque values from the adaptor manufacturer, system pressure rating, or relevant standards (e.g., BSP fitting torque charts, EN/ISO standards) or contact the supplier for precise torque instructions. - If manufacturer data is unavailable, perform a controlled assembly test at operating pressure with inspection for leaks, and adopt a documented torque or assembly procedure validated for your application. Conclusion: No specific torque values are provided in the description; use manufacturer-supplied torque data or conform to validated industry procedures for 60Â° cone BSP swivel nuts.

Adaptor with GW BSP, stainless steel, type A105

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel

High-pressure adaptor type A105 with internal BSP threads, featuring a swivel nut (60° cone seal). Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A105-02-SS	Adaptor GW BSP 1/8" / GW BSP 1/8", AISI 316	-	400	In stock	Enquiry
TI-A105-04-SS	Adaptor GW BSP 1/4" / GW BSP 1/4", AISI 316	-	400	In stock	Enquiry
TI-A105-06-SS	Adaptor GW BSP 3/8" / GW BSP 3/8", AISI 316	-	400	In stock	Enquiry
TI-A105-08-SS	Adaptor GW BSP 1/2" / GW BSP 1/2", AISI 316	-	350	In stock	Enquiry
TI-A105-12-SS	Adaptor GW BSP 3/4" / GW BSP 3/4", AISI 316	-	315	In stock	Enquiry
TI-A105-16-SS	Adaptor GW BSP 1" / GW BSP 1", AISI 316	-	250	In stock	Enquiry