Does the Adaptor with GZ BSP, stainless steel, type A107 (AISI 316L) support 60Â° cone sealing with external BSP threads for high-pressure applications?

Yes. The Adaptor with GZ BSP, stainless steel, type A107 supports 60Â° cone sealing with external BSP threads for high-pressure applications. The description âHigh-pressure adaptor type A107 without nut, with external BSP threads (60Â° cone sealing). Material: AISI 316L steel.â indicates it is specifically designed for high-pressure use, uses external BSP threads, and employs a 60Â° cone sealing face. AISI 316L stainless steel provides corrosion resistance and strength suitable for demanding environments. Ensure compatibility with the mating fittingâs 60Â° cone profile and verify pressure ratings for your specific system before installation.

Is the Adaptor with GZ BSP, stainless steel, type A107 compatible with standard BSP fittings for 60Â° cone sealing under high pressure?

Yes. Adaptor with GZ BSP, stainless steel, type A107 is compatible with standard BSP fittings that use 60Â° cone sealing. It has external BSP threads and a 60Â° cone sealing face and is manufactured from AISI 316L stainless steel, suitable for high-pressure applications. Ensure the mating fitting uses the same BSP thread standard (size and pitch) and a matching 60Â° cone seat; proper assembly and torque are required to achieve a reliable high-pressure seal.

Can Adaptor with GZ BSP, stainless steel, type A107 (AISI 316L) be used with external BSP threads for 60Â° cone sealing under corrosive fluids?

Yes. Adaptor with GZ BSP, stainless steel, type A107 (AISI 316L) can be used with external BSP threads for 60Â° cone sealing in environments with corrosive fluids, with these important caveats: - Material compatibility: AISI 316L (low-carbon 316 stainless steel) offers good corrosion resistance to many acidic, saline and chemical environments compared with 304, but it is not universally resistant. It performs well in chlorides and general chemical exposure but can still suffer pitting, crevice corrosion or stress-corrosion cracking in highly aggressive media (e.g., hot concentrated chlorides, certain strong acids, halogenated solvents). Verify chemical compatibility with the specific fluid, concentration and temperature. - Sealing type: The adaptor is designed for 60Â° cone (BSP) metal-to-metal sealing. Proper sealing requires clean, undamaged cone surfaces and correct thread engagement. Metal cone seals are reliable for high pressure but are less forgiving to misalignment or surface damage than soft seals. - Pressure and temperature: Confirm the operating pressure and temperature against the adaptorâs rated limits and the systemâs overall pressure-temperature ratings for AISI 316L. Elevated temperatures reduce corrosion resistance and mechanical strength; high pressures increase the demand on the cone seal. - Thread and installation: External BSP threads must be undamaged and correctly tightened to achieve the metal cone seal. Use recommended torque values and avoid sealing compounds that could interfere with metal-to-metal contact. PTFE tapes or incompatible sealants can prevent proper metal seating; use only compatible practices per manufacturer guidance. - Preventative measures: For aggressive fluids, consider additional protectionsâe.g., selection of higher-alloy materials (duplex, Hastelloy), sacrificial anodes, corrosion inhibitors, or protective linings. Regular inspection and maintenance are advised. Conclusion: Adaptor with GZ BSP, stainless steel, type A107 (AISI 316L) is suitable for 60Â° cone sealing with external BSP threads in many corrosive service conditions, provided the fluid, concentration, temperature and pressure are compatible with AISI 316L and proper installation practices are followed. If in doubt for highly aggressive environments, select a more corrosion-resistant material or consult the manufacturer for application limits.

Adaptor with GZ BSP, stainless steel, type A107

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel

High-pressure adaptor type A107 without nut, with external BSP threads (60° cone sealing). Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A107-04-SS	Bulkhead adapter GZ BSP 1/4" / GZ BSP 1/4", AISI 316	-	400	In stock	Enquiry
TI-A107-06-SS	Wall adapter GZ BSP 3/8" / GZ BSP 3/8", AISI 316	-	400	In stock	Enquiry
TI-A107-08-SS	Wall adapter GZ BSP 1/2" / GZ BSP 1/2", AISI 316	-	350	In stock	Enquiry
TI-A107-12-SS	Wall adapter GZ BSP 3/4" / GZ BSP 3/4", AISI 316	-	315	In stock	Enquiry
TI-A107-16-SS	Wall adapter GZ BSP 1" / GZ BSP 1", AISI 316	-	250	In stock	Enquiry
TI-A107-20-SS	Wall adapter GZ BSP 1.1/4" / GZ BSP 1.1/4", AISI 316	-	200	In stock	Enquiry