Does the JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT require Teflon tape or anaerobic sealant for proper thread sealing?

Yes. The JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT requires thread sealing on the NPT threads. Use Teflon tape or an anaerobic pipe sealant (thread sealant) to achieve a proper, leak-free seal on the tapered NPT threads. Ensure tape or sealant is applied correctly and avoid contaminating the sealing surfaces of the JIC face.

Can I use PTFE tape or anaerobic sealant on the threads of the JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT?

Yes. For the JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT, you may seal the external NPT threads using PTFE (Teflon) tape or an anaerobic thread sealant. The product description for the Adjustable 90Â° elbow fitting JIC 37Â° with external NPT thread explicitly states that the seal is made on the thread using Teflon tape or anaerobic sealant. Ensure proper application: wrap PTFE tape in the direction of thread engagement (typically 2â4 wraps), or apply an appropriate anaerobic sealant compatible with carbon steel and the fluid/media. Follow torque specs and manufacturer installation guidance to avoid over-tightening or damaging the fitting.

Is thread sealing with PTFE tape or anaerobic sealant required for JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT?

Yes. For JIC 90Â° adjustable angle fitting with carbon steel NPT socket, type WE-NT the NPT connection requires thread sealing. Use PTFE (Teflon) tape or an appropriate anaerobic pipe thread sealant on the external NPT thread to ensure a reliable, leak-free seal. Apply tape or sealant per manufacturer recommendations and follow correct application technique (wrap tape in the direction of the thread, avoid over-application; allow anaerobic sealant to cure as specified). Do not apply sealant to the JIC 37Â° seating surface; that metal-to-metal flare seat must remain clean and free of sealant or tape.

Fitting angled 90° adjustable JIC with NPT male of carbon steel, type WE-NT

Additional information

Material	CS – steel (cast iron)

Fitting angled 90° adjustable JIC 37° with NPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HJ-WE-07-NT-02	Fitting 90° male JIC 7/16"-20 / 1/8" NPT male	-	350	In stock	Enquiry
HJ-WE-07-NT-04	Fitting 90° male JIC 7/16"-20 / 1/4" NPT male	-	350	In stock	Enquiry
HJ-WE-07-NT-06	Fitting 90° male JIC 7/16"-20 / 3/8" NPT male	-	350	In stock	Enquiry
HJ-WE-07-NT-08	Fitting 90° male JIC 7/16"-20 / 1/2" NPT male	-	350	In stock	Enquiry
HJ-WE-08-NT-02	Fitting 90° male JIC 1/2"-20 / 1/8" NPT male	-	350	In stock	Enquiry
HJ-WE-08-NT-04	Fitting 90° male JIC 1/2"-20 / 1/4" NPT male	-	350	In stock	Enquiry
HJ-WE-09-NT-02	Fitting 90° male JIC 9/16"-18 / 1/8" NPT male	-	350	In stock	Enquiry
HJ-WE-09-NT-04	Fitting 90° male JIC 9/16"-18 / 1/4" NPT male	-	350	In stock	Enquiry
HJ-WE-09-NT-06	Fitting 90° male JIC 9/16"-18 / 3/8" NPT male	-	350	In stock	Enquiry
HJ-WE-09-NT-08	Fitting 90° male JIC 9/16"-18 / 1/2" NPT male	-	350	In stock	Enquiry
HJ-WE-12-NT-04	Fitting 90° male JIC 3/4"-16 / 1/4" NPT male	-	350	In stock	Enquiry
HJ-WE-12-NT-06	Fitting 90° male JIC 3/4"-16 / 3/8" NPT male	-	350	In stock	Enquiry
HJ-WE-12-NT-08	Fitting 90° male JIC 3/4"-16 / 1/2" NPT male	-	350	In stock	Enquiry
HJ-WE-12-NT-12	Fitting 90° male JIC 3/4"-16 / 3/4" NPT male	-	350	In stock	Enquiry
HJ-WE-14-NT-06	Fitting 90° male JIC 7/8"-14 / 3/8" NPT male	-	350	In stock	Enquiry
HJ-WE-14-NT-08	Fitting 90° male JIC 7/8"-14 / 1/2" NPT male	-	350	In stock	Enquiry
HJ-WE-14-NT-12	Fitting 90° male JIC 7/8"-14 / 3/4" NPT male	-	350	In stock	Enquiry
HJ-WE-17-NT-08	Fitting 90° male JIC 1.1/16"-12 / 1/2" NPT male	-	350	In stock	Enquiry
HJ-WE-17-NT-12	Fitting 90° male JIC 1.1/16"-12 / 3/4" NPT male	-	350	In stock	Enquiry
HJ-WE-17-NT-16	Fitting 90° male JIC 1.1/16"-12 / 1" NPT male	-	290	In stock	Enquiry
HJ-WE-21-NT-12	Fitting 90° male JIC 1.5/16"-12 / 3/4" NPT male	-	290	In stock	Enquiry
HJ-WE-21-NT-16	Fitting 90° male JIC 1.5/16"-12 / 1" NPT male	-	290	In stock	Enquiry
HJ-WE-21-NT-20	Fitting 90° male JIC 1.5/16"-12 / 1.1/4" NPT male	-	240	In stock	Enquiry
HJ-WE-26-NT-16	Fitting 90° male JIC 1.5/8"-12 / 1" NPT male	-	240	In stock	Enquiry
HJ-WE-26-NT-20	Fitting 90° male JIC 1.5/8"-12 / 1.1/4" NPT male	-	240	In stock	Enquiry
HJ-WE-26-NT-24	Fitting 90° male JIC 1.5/8"-12 / 1.1/2" NPT male	-	240	In stock	Enquiry
HJ-WE-30-NT-20	Fitting 90° male JIC 1.7/8"-12 / 1.1/4" NPT male	-	240	In stock	Enquiry
HJ-WE-30-NT-24	Fitting 90° male JIC 1.7/8"-12 / 1.1/2" NPT male	-	240	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting angled 90° adjustable JIC 37° with NPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.