Is the Plug tee "L" adjustable with tapered male thread, type R38 compatible with standard pneumatic hoses and fittings at 16 bar?

Yes. The Plug tee "L" adjustable with tapered male thread, type R38 is compatible with standard pneumatic hoses and fittings at 16 bar, provided the mating fittings accept the R38 tapered male thread and use NBR sealing. Reasoning: - The product is explicitly rated for a working pressure of 16 bar and for air as the working medium. - It is designed for connecting hoses and other components in pneumatic systems and to allow multiple assemblies without loss of sealing on mechanical and pneumatic sides. - Material (nickel-plated brass) and NBR sealing are typical and suitable for standard pneumatic applications within the stated temperature range (â20Â°C to +80Â°C). Ensure the mating components have the matching R38 tapered female thread and that the hose/fitting materials and NBR seals are compatible with your specific application and temperature/chemical conditions.

Can Plug tee "L" adjustable with tapered male thread, type R38 be used in vacuum applications without degrading NBR sealing performance?

Yes. Plug tee "L" adjustable with tapered male thread, type R38 can be used in vacuum applications without degrading NBR sealing performance. The product description explicitly lists working medium: vacuum, air, and specifies NBR sealing and an operating temperature range of -20Â°C to +80Â°C. As long as the vacuum level and temperature remain within the stated specifications and mechanical assembly follows the manufacturerâs guidance, the NBR seal will maintain performance. Note: for deep vacuum or temperatures outside the range, consider alternative seals or consult the manufacturer.

Does Plug tee "L" adjustable with tapered male thread, type R38 require torque specification for reliable sealing?

Plug tee "L" adjustable with tapered male thread, type R38 does benefit from a torque specification for reliable sealing, although the product description emphasizes easy and repeatable assembly without loss of sealing. Reasons and guidance: - Tapered male threads (NPT-like geometry) achieve primary sealing through thread compression and deformation of the mating seal. Controlled torque ensures consistent thread engagement and compression of the NBR sealing element, preventing under- or over-tightening. - NBR gasket performance and nickel-plated brass threads are sensitive to assembly torque: insufficient torque can cause leaks; excessive torque can damage threads, deform the NBR seal or impair reusability. - Recommended practice: follow the mating component manufacturerâs torque spec if available. If not provided, use moderate, controlled torque appropriate for the fitting size and materialâtypically in the low tens of Nm for small pneumatic fittings. Apply thread sealant or PTFE tape if specified by system requirements and compatible with NBR. - Inspect after assembly and test at working pressure (up to 16 bar) and intended temperature range (â20 Â°C to +80 Â°C). Re-torque after initial pressurization if needed and avoid repeated over-tightening to preserve sealing performance over multiple assemblies. Conclusion: While Plug tee "L" adjustable with tapered male thread, type R38 is designed for easy repeated assembly, using a controlled torque during installation is advisable to achieve reliable, repeatable sealing and to protect the NBR seal and threads.

Plug tee “L” adjustable with tapered male thread, type R38

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Adjustable “L” plug tee with external tapered thread, type R38, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2038015	Adjustable L branch connector RL38 hose 12 mm, GZ BSP 3/8"	-	16	In stock	Enquiry
MW-2038016	Adjustable L-shaped tee connector RL38 hose 12 mm, GZ BSP 1/2"	-	16	In stock	Enquiry
MW-2L38002	Adjustable L-shaped tee connector RL38 hose 4 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L38008	Adjustable L branch connector RL38 hose 6 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L38009	Adjustable L-shaped tee connector RL38 hose 6 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L38010	Adjustable L branch connector RL38 hose 8 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L38011	Adjustable L branch connector RL38 hose 8 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L38013	Adjustable L-shaped tee connector RL38 hose 10 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L38014	Adjustable L branch connector RL38 hose 10 mm, GZ BSP 3/8"	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Adjustable “L” plug tee with external tapered thread, type R38, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.