Is the BANJO TH-BE adjustable tee screw connection, carbon steel, compatible with both metric external and BSP external threads while using DIN 3852 type E elastomer gasket?

Yes. The BANJO TH-BE adjustable tee screw connection, carbon steel features a 24Â° DIN 2353 socket with both external metric thread and external BSP thread options, and is specified to use DIN 3852 type E elastomer gasket (rectangular cross-section). Therefore it is compatible with both metric external and BSP external threads when using the DIN 3852 type E elastomer gasket. The fitting is carbon steel, galvanized, offered in light (L) and heavy (S) series, and rated with a 4:1 safety factor.

Can the BANJO TH-BE adjustable tee screw connection, carbon steel, be ordered in both L (light) and S (heavy) series with a 4:1 safety factor?

Yes. The BANJO TH-BE adjustable tee screw connection, carbon steel can be ordered in both L (light) and S (heavy) series with a 4:1 safety factor. The fitting is a 24Â° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E â elastomer gasket), available in L and S series, made of galvanized carbon steel, and specified with a 4:1 safety factor.

Does the BANJO TH-BE adjustable tee screw connection, carbon steel, require a specific torque for the 24Â° DIN 2353 socket with BSP thread?

The BANJO TH-BE adjustable tee screw connection, carbon steel does not specify a single universal tightening torque in the provided DIN 2353-based description. DIN 2353 fittings (24Â° socket) and fittings with DIN 3852 type E elastomer gaskets are normally tightened to torques that depend on thread size, thread type (metric or BSP), material, surface condition, and whether sealing is achieved by metal-to-metal 24Â° cone or by the elastomer gasket. Practical guidance: - Follow DIN 2353 and manufacturer torque tables when available; typical recommended torques are given per thread size/series (L light, S heavy) by fitting manufacturers. - If no manufacturer torque is supplied, use standard torque values for the specific thread size and material (carbon steel, galvanized) and verify sealing by pressure test. - For BSP threads with elastomer gasket (DIN 3852 E), avoid over-torquing to prevent gasket extrusion; start at mid-range torque for the thread size and tighten until proper compression/seal is achieved. - Use a calibrated torque wrench and perform a pressure/leak test after assembly. Apply the safety factor 4:1 in system design, not as an assembly torque. If you need exact torque numbers, provide the specific thread size (metric or BSP) and series (L or S), or request the manufacturerâs torque chart for BANJO TH-BE adjustable tee screw connection, carbon steel.

Fitting screw-in tee adjustable BANJO TH-BE, carbon steel

Additional information

Material	CS – steel (cast iron)

Fitting DIN 2353 screw-in tee adjustable BANJO, type TH-BE: 24° DIN 2353 socket with metric male thread and with BSP male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section). Safety factor 4:1. Available as: L (series light), S (series heavy). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-TH-06L-BE-02	Fitting DIN 2353 BANJO TH 6L 1/8" BSP	-	315	In stock	Enquiry
HD-TH-06S-BE-04	Fitting DIN 2353 BANJO TH 6S 1/4" BSP	-	630	In stock	Enquiry
HD-TH-08L-BE-04	Fitting DIN 2353 BANJO TH 8L 1/4" BSP	-	315	In stock	Enquiry
HD-TH-08S-BE-04	Fitting DIN 2353 BANJO TH 8S 1/4" BSP	-	630	In stock	Enquiry
HD-TH-10L-BE-04	Fitting DIN 2353 BANJO TH 10L 1/4" BSP	-	315	In stock	Enquiry
HD-TH-10S-BE-06	Fitting DIN 2353 BANJO TH 10S 3/8" BSP	-	630	In stock	Enquiry
HD-TH-12L-BE-06	Fitting DIN 2353 BANJO TH 12L 3/8" BSP	-	315	In stock	Enquiry
HD-TH-12S-BE-06	Fitting DIN 2353 BANJO TH 12S 3/8" BSP	-	630	In stock	Enquiry
HD-TH-14S-BE-08	Fitting DIN 2353 BANJO TH 14S 1/2" BSP	-	630	In stock	Enquiry
HD-TH-15L-BE-08	Fitting DIN 2353 BANJO TH 15L 1/2" BSP	-	315	In stock	Enquiry
HD-TH-16S-BE-08	Fitting DIN 2353 BANJO TH 16S 1/2" BSP	-	400	In stock	Enquiry
HD-TH-18L-BE-08	Fitting DIN 2353 BANJO TH 18L 1/2" BSP	-	315	In stock	Enquiry
HD-TH-20S-BE-12	Fitting DIN 2353 BANJO TH 20S 3/4" BSP	-	400	In stock	Enquiry
HD-TH-22L-BE-12	Fitting DIN 2353 BANJO TH 22L 3/4" BSP	-	160	In stock	Enquiry
HD-TH-25S-BE-16	Fitting DIN 2353 BANJO TH 25S 1" BSP	-	400	In stock	Enquiry
HD-TH-28L-BE-16	Fitting DIN 2353 BANJO TH 28L 1" BSP	-	160	In stock	Enquiry
HD-TH-30S-BE-20	Fitting DIN 2353 BANJO TH 30S 1.1/4" BSP	-	400	In stock	Enquiry
HD-TH-35L-BE-20	Fitting DIN 2353 BANJO TH 35L 1.1/4" BSP	-	160	In stock	Enquiry
HD-TH-38S-BE-24	Fitting DIN 2353 BANJO TH 38S 1.1/2" BSP	-	315	In stock	Enquiry
HD-TH-42L-BE-24	Fitting DIN 2353 BANJO TH 42L 1.1/2" BSP	-	160	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting DIN 2353 screw-in tee adjustable BANJO, type TH-BE: 24° DIN 2353 socket with metric male thread and with BSP male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section). Safety factor 4:1. Available as: L (series light), S (series heavy). Material: carbon steel, galvanized.