Is the Plug tee "T" adjustable with tapered male thread, type R32C suitable for use with oil-lubricated compressed air systems?

Plug tee "T" adjustable with tapered male thread, type R32C is specified for vacuum and air as working media, with NBR sealing and nickel-plated brass body, working pressure up to 16 bar and temperature range â20Â°C to +80Â°C. NBR (nitrile rubber) seals are generally compatible with mineral oil and common lubricants used in many compressed air systems, so for typical oil-lubricated compressed air the material compatibility is acceptable. However, suitability depends on the specific compressor oil type (synthetic oils, ester-based fluids or certain additives can degrade NBR), oil concentration in the air, and operating temperature/pressure conditions. If the system uses aggressive or high-temperature oils, or if compatibility must be guaranteed for safety/standards, confirm with the oil manufacturer or select a version with a different seal material (e.g., Viton/FKM) or consult the supplier for compatibility data. In summary: likely suitable for common oil-lubricated compressed air, but verify oil type and, if in doubt, request compatibility confirmation from the manufacturer.

Can Plug tee "T" adjustable with tapered male thread, type R32C be used with corrosive gases or aggressive media?

No. Plug tee "T" adjustable with tapered male thread, type R32C is made of nickelâplated brass, sealed with NBR and specified for vacuum and air at temperatures â20Â°C to +80Â°C. This construction and NBR sealing are not suitable for corrosive gases or aggressive media, which can attack brass plating and degrade NBR, causing leaks and failure. For corrosive or aggressive media, choose fittings and seals made from compatible materials (e.g., stainless steel and FKM/EPDM/PTFE as appropriate) rated for the specific chemicals and operating conditions.

Can Plug tee "T" adjustable with tapered male thread, type R32C be repeatedly assembled/disassembled without loss of seal?

Yes. The Plug tee "T" adjustable with tapered male thread, type R32C is designed for repeated assembly and disassembly without loss of seal. Its features supporting this are: - Intended use: specifically made for connecting pipes and components in pneumatic systems with easy and quick multiple assemblies. - Sealing: uses NBR (nitrile) sealing material that provides reliable elastic sealing over many cycles when used within specified conditions. - Material and finish: nickel-plated brass provides good wear and corrosion resistance, helping maintain thread and sealing surface integrity during repeated use. - Operating limits: rated for 16 bar working pressure, vacuum and air media, and temperatures from â20 Â°C to +80 Â°Câstaying within these limits helps preserve seal performance over multiple assemblies. Practical notes to ensure longevity: follow recommended tightening practices for tapered threads, avoid exceeding pressure/temperature limits, keep threads and seals clean, and inspect or replace NBR seals if damaged or hardened. Under proper use and maintenance, repeated assembly/disassembly should not compromise sealing.

Tee plug-in “T” adjustable with a thread external tapered, type R32C

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Tee plug-in “T” adjustable with a thread external, type R32C, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L32C02	Tee fitting T adjustable RL32/C hose 4 mm, 1/8" BSPT male	-	16	In stock	Enquiry
MW-2L32C03	Tee fitting T adjustable RL32/C hose 4 mm, 1/4" BSPT male	-	16	In stock	Enquiry
MW-2L32C08	Tee fitting T adjustable RL32/C hose 6 mm, 1/8" BSPT male	-	16	In stock	Enquiry
MW-2L32C09	Tee fitting T adjustable RL32/C hose 6 mm, 1/4" BSPT male	-	16	In stock	Enquiry
MW-2L32C10	Tee fitting T adjustable RL32/C hose 8 mm, 1/8" BSPT male	-	16	In stock	Enquiry
MW-2L32C11	Tee fitting T adjustable RL32/C hose 8 mm, 1/4" BSPT male	-	16	In stock	Enquiry
MW-2L32C12	Tee fitting T adjustable RL32/C hose 8 mm, 3/8" BSPT male	-	16	In stock	Enquiry
MW-2L32C13	Tee fitting T adjustable RL32/C hose 10 mm, 1/4" BSPT male	-	16	In stock	Enquiry
MW-2L32C14	Tee fitting T adjustable RL32/C hose 10 mm, 3/8" BSPT male	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee plug-in “T” adjustable with a thread external, type R32C, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.