Is the ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 suitable for use in wastewater treatment plants and groundwater drainage?

Yes. The ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 is suitable for use in wastewater treatment plants and groundwater drainage. The product description explicitly lists groundwater drainage and wastewater treatment plants among intended applications. Its galvanized steel construction offers corrosion resistance appropriate for many sewage and drainage environments, NR/SBR rubber sealing provides reliable sealing for contaminated water, and the PN 10 flange rating matches typical low-pressure wastewater systems. The working pressure range (5â19 bar depending on size) and operating temperature range (â20Â°C to +50Â°C) cover normal conditions encountered in such facilities. Note: final suitability depends on site-specific factors (chemical aggressiveness, pressure spikes, local regulations, and required certifications). Verify compatibility with local standards and project requirements before installation.

Can the ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 withstand temperatures from -20Â°C to +50Â°C in agricultural and construction environments?

Yes. The ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 is specified for operating temperatures from -20Â°C to +50Â°C and is intended for agricultural and construction environments (among others). Its galvanized steel construction and NR/SBR rubber sealing, together with the stated operating temperature range, make it suitable for typical agricultural and construction conditions within that temperature span. Ensure correct connector size and working pressure (5â19 bar depending on size) for your application.

Does the ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 meet sealing standards for NR/SBR in horticulture and industry?

Yes. The ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 uses NR/SBR rubber sealing and is explicitly specified for use in horticulture and industrial applications (among others: agricultural farms, industry, construction, wastewater and sewage systems, environmental protection). Its sealing material (NR/SBR) and stated operating temperature range (â20Â°C to +50Â°C) are appropriate for typical horticultural and many industrial environments. The productâs working pressure range (5â19 bar depending on connector size) also supports a variety of service conditions encountered in those sectors. Caveats to verify before final acceptance: - Confirm that the specific temperature and chemical conditions of your application fall within NR/SBR performance limits (NR/SBR is suitable for water, soil-related media and many non-aggressive fluids but is not resistant to strong oils, solvents or aggressive chemicals). - Check the exact connector size to ensure the required working pressure is within the listed 5â19 bar range. - For food-grade, potable water, or chemically aggressive environments, confirm regulatory or material compatibility requirements (NR/SBR may not meet some potable-water or chemical-resistance standards). Conclusion: For standard horticulture and many industrial drainage/sewage applications, the ANFOR lever coupling socket with PN 10 flange, galvanized steel, type A.45 meets sealing expectations when used within its specified temperature, pressure and chemical compatibility limits.

Socket lever coupling ANFOR with a flange PN 10, steel galvanized, type A.45

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	2, 3

Socket lever coupling ANFOR with a flange PN 10 for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A45-060-065	Socket ANFOR 60 mm, flange PN10 / DN65, galvanized steel	-	19	In stock	Enquiry
OM-A45-080-080	Socket ANFOR 80 mm, flange PN10 / DN80, galvanized steel	-	16	In stock	Enquiry
OM-A45-100-100	Socket ANFOR 100 mm, flange PN10 / DN100, galvanized steel	-	14	In stock	Enquiry
OM-A45-120-125	Socket ANFOR 120 mm, flange PN10 / DN125, galvanized steel	-	13	In stock	Enquiry
OM-A45-150-150	Socket ANFOR 150 mm, flange PN10 / DN150, galvanized steel	-	12	In stock	Enquiry
OM-A45-200-200	Socket ANFOR 200 mm, flange PN10 / DN200, galvanized steel	-	6	In stock	Enquiry
OM-A45-250-250	Socket ANFOR 250 mm, flange PN10 / DN250, galvanized steel	-	5	In stock	Enquiry
OM-A45-300-300	Socket ANFOR 300 mm, flange PN10 / DN300, galvanized steel	-	5	In stock	Enquiry
OM-A45-400-400	Socket ANFOR 400 mm, flange PN10 / DN400, galvanized steel	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Socket lever coupling ANFOR with a flange PN 10 for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.