Can CAMLOCK DC plug cap in polypropylene withstand pressures up to 7 bar and resist chemical exposure with its EPDM seal and fiberglass reinforcement?

Yes. The CAMLOCK DC plug cap in polypropylene reinforced with fiberglass and fitted with an EPDM seal is designed to meet the stated requirements. Built to American military standard MIL-C-27487 (A-A-59326), it is rated for working pressures up to 7 bar (actual capability depends on coupling size) and the fiberglass reinforcement increases structural strength and pressure resistance. EPDM sealing provides good resistance to many water-based fluids, steam, and a wide range of chemicals (acids, alkalis, and ketones) at typical service temperatures. Limitations: polypropylene and EPDM have reduced resistance to strong hydrocarbons, solvents like aromatic and chlorinated solvents, concentrated oils, and certain aggressive chemicals; extreme temperatures can degrade EPDM performance. For specific media, concentrations and temperatures, verify compatibility with manufacturer data or a chemical-resistance chart to ensure safe long-term use.

Is the CAMLOCK DC plug cap in polypropylene compatible with AISI 304 lever and MIL-C-27487 mounting standards?

Yes. The CAMLOCK DC plug cap in polypropylene reinforced with fiberglass is compatible with the AISI 304 lever and the MIL-C-27487 (A-A-59326) mounting standard as described. The product specification explicitly states it is a plug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487, uses a lever of AISI 304 steel, and its material and sealing (EPDM) are specified, so it meets those standards and component compatibility. Working pressure is up to 7 bar depending on coupling size.

Does the CAMLOCK DC plug cap, polypropylene version, meet MIL-C-27487 dimensional tolerances?

Yes. The CAMLOCK DC plug cap, polypropylene version, is manufactured according to the American military standard MIL-C-27487 (A-A-59326) and therefore meets the dimensional tolerances specified by that standard. The product description explicitly states it is made in accordance with MIL-C-27487, and materials and construction (polypropylene reinforced with fiberglass body, AISI 304 lever, EPDM sealing) are consistent with a component produced to those military dimensions and functional requirements.

Plug cap CAMLOCK DC, polypropylene

Additional information

Material	P – material (plastic)

Plug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. lever: steel AISI 304. Sealing: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-DC-075-P	Coupling CAMLOCK DC 3/4" polypropylene	-	7	In stock	Enquiry
AC-DC-075-PX	Coupling CAMLOCK DC 3/4" polypropylene	-	7	In stock	Enquiry
AC-DC-100-P	Coupling CAMLOCK DC 1" polypropylene	-	7	In stock	Enquiry
AC-DC-100-PX	Coupling CAMLOCK DC 1" polypropylene	-	7	In stock	Enquiry
AC-DC-125-P	Coupling CAMLOCK DC 1.1/4", polypropylene	-	7	In stock	Enquiry
AC-DC-125-PX	Coupling CAMLOCK DC 1.1/4", polypropylene	-	7	In stock	Enquiry
AC-DC-150-P	Coupling CAMLOCK DC 1.1/2" polypropylene	-	7	In stock	Enquiry
AC-DC-150-PX	Coupling CAMLOCK DC 1.1/2 polypropylene	-	7	In stock	Enquiry
AC-DC-200-P	Coupling CAMLOCK DC 2" polypropylene	-	7	In stock	Enquiry
AC-DC-200-PX	Coupling CAMLOCK DC 2" polypropylene	-	7	In stock	Enquiry
AC-DC-300-P	Coupling CAMLOCK DC 3" polypropylene	-	4	In stock	Enquiry
AC-DC-300-PX	Coupling CAMLOCK DC 3" polypropylene	-	4	In stock	Enquiry
AC-DC-400-P	Coupling CAMLOCK DC 4" polypropylene	-	4	In stock	Enquiry
AC-DC-400-PX	Coupling CAMLOCK DC 4", polypropylene	-	4	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. lever: steel AISI 304. Sealing: EPDM.