Is the CAMLOCK DC plug cap, stainless steel compatible with food-grade fluids and cleaning agents at pressures up to 10 bar?

The CAMLOCK DC plug cap, stainless steel is made of AISI 316 stainless steel with AISI 304 levers and NBR (nitrile) sealing, and is rated for working pressures up to 10 bar depending on coupling size. Compatibility notes: - AISI 316 stainless steel is broadly suitable for contact with many food-grade fluids and is commonly used in food and beverage applications due to its corrosion resistance. - NBR (nitrile) seals are generally compatible with water, oils, and many aqueous food products, but have limited resistance to certain chemicals (e.g., strong oxidizers, ketones, some acids, and high alcohol concentrations). - For cleaning agents: AISI 316 is resistant to most cleaning chemicals used in food industry, but NBR can be degraded by some sanitizers (e.g., high-concentration chlorine, peracetic acid, strong solvents). Conclusion: The CAMLOCK DC plug cap, stainless steel is likely suitable for many food-grade fluids and typical cleaning agents at pressures up to 10 bar, provided the specific fluid and sanitizer chemistries are compatible with NBR. For regulatory or safety-critical uses, verify chemical compatibility of NBR with your exact fluids and cleaning agents or specify a food-grade elastomer (e.g., EPDM, FKM) and obtain any required food-contact certifications.

Can CAMLOCK DC plug cap, stainless steel withstand corrosion in saltwater or marine environments at pressures up to 10 bar?

CAMLOCK DC plug cap, stainless steel made of AISI 316 offers excellent corrosion resistance in marine and saltwater environments; AISI 316 contains molybdenum which improves pitting and crevice corrosion resistance compared to 304. However levers are AISI 304, which is less resistant to chloride-induced corrosion and may corrode faster in prolonged saltwater exposure. Sealing is NBR, which has limited resistance to hot seawater, oils and some chemicals-suitable for many applications but not optimal for long-term high-temperature marine use. Working pressure up to 10 bar is supported per specification (depending on coupling size). For long-term marine immersion or highly corrosive conditions, consider full AISI 316/316L hardware and a more seawater-resistant elastomer (e.g., FKM or EPDM) or additional protective coatings.

Does the CAMLOCK DC plug cap, stainless steel meet ISO or ASTM standards for pressure testing up to 10 bar?

The CAMLOCK DC plug cap, stainless steel is manufactured to the American military standard MIL-C-27487 (A-A-59326) and is specified with a working pressure up to 10 bar (depending on coupling size). The product description does not state compliance with ISO or ASTM pressure-testing standards. MIL-C-27487 is a military specification for camlock-type couplings and covers design and interchangeability, but it is distinct from ISO or ASTM test standards. Therefore, based solely on the provided description, you cannot conclude that the CAMLOCK DC plug cap, stainless steel explicitly meets ISO or ASTM pressure-testing standards up to 10 bar. If ISO or ASTM certification is required, request test reports or certification from the manufacturer showing pressure testing conducted according to the specific ISO or ASTM standard(s) you require.

CAMLOCK DC plug cap, stainless steel

Additional information

Material	SS – stainless steel

Plug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
AC-DC-050-SS	CAMLOCK DC 1/2" connector, AISI 316	-	10
AC-DC-050-SSX	CAMLOCK DC 1/2" connector, AISI 316	-	10
AC-DC-075-SS	CAMLOCK DC 3/4" connector, AISI 316	-	10
AC-DC-075-SSX	CAMLOCK DC 3/4" connector, AISI 316	-	10
AC-DC-100-SS	CAMLOCK DC 1" connector, AISI 316	-	10
AC-DC-100-SSX	CAMLOCK DC 1" connector, AISI 316	-	10
AC-DC-125-SS	CAMLOCK DC 1.1/4" connector, AISI 316	-	10
AC-DC-125-SSX	CAMLOCK DC 1.1/4" connector, AISI 316	-	10
AC-DC-150-SS	CAMLOCK DC 1.1/2" connector, AISI 316	-	10
AC-DC-150-SSX	CAMLOCK DC 1.1/2" connector, AISI 316	-	10
AC-DC-200-SS	CAMLOCK DC 2" connector, AISI 316	-	10
AC-DC-200-SSX	CAMLOCK DC 2" connector, AISI 316	-	10
AC-DC-250-SS	CAMLOCK DC 2.1/2" connector, AISI 316	-	10
AC-DC-250-SSX	CAMLOCK DC 2.1/2" connector, AISI 316	-	10
AC-DC-300-SS	CAMLOCK DC 3" connector, AISI 316	-	10
AC-DC-300-SSX	CAMLOCK DC 3" connector, AISI 316	-	10
AC-DC-400-SS	CAMLOCK DC 4" connector, AISI 316	-	10
AC-DC-400-SSX	CAMLOCK DC 4" connector, AISI 316	-	10
AC-DC-500-SS	CAMLOCK DC 5" connector, AISI 316	-	9
AC-DC-500-SSX	CAMLOCK DC 5" connector, AISI 316	-	9
AC-DC-600-SS	CAMLOCK DC 6" connector, AISI 316	-	9
AC-DC-600-SSX	CAMLOCK DC 6" connector, AISI 316	-	9

Plug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.