Is the CAMLOCK DP socket cap, polypropylene end cap compatible with MIL-C-27487 (A-A-59326) couplings and rated for working pressures up to 7 bar?

Yes. The CAMLOCK DP socket cap, polypropylene is an end cap made according to the American military standard MIL-C-27487 (A-A-59326), and it is rated for working pressures up to 7 bar (actual allowable pressure depends on the coupling size). The material is fiberglass-reinforced polypropylene.

Can the CAMLOCK DP socket cap, polypropylene withstand chemical exposure and outdoor UV while used with MIL-C-27487 (A-A-59326) couplings?

Yes. The CAMLOCK DP socket cap, polypropylene is made of fiberglass-reinforced polypropylene, providing good chemical resistance and UV stability for outdoor use. When paired with MIL-C-27487 (A-A-59326) couplings and operated within its specified working pressure (up to 7 bar, depending on size), it can withstand typical chemical exposure and outdoor UV. However, resistance varies by specific chemicals, concentrations, temperatures and duration of exposure; for aggressive solvents, strong acids/alkalis or prolonged high-UV environments, verify compatibility with manufacturer chemical resistance data and consider periodic inspection or alternative materials if needed.

Does the CAMLOCK DP socket cap, polypropylene fiberglass-reinforced, fit MIL-C-27487 couplings across all sizes?

Generally yes. the CAMLOCK DP socket cap, polypropylene fiberglass-reinforced, is designed to fit MILâCâ27487 (AâAâ59326) style couplings, but compatibility can depend on the exact size and manufacturer tolerances. Explanation: The product description states it is an "End cap for CAMLOCK DP coupling made according to American military standard MILâCâ27487 (AâAâ59326)," which indicates it was manufactured to the dimensional and performance requirements of that standard. When both the cap and the coupling are produced to the same MILâCâ27487 specification, they should be interchangeable across the standard sizes offered for CAMLOCK DP fittings. The working pressure ("up to 7 bar, depending on coupling size") and the polypropylene reinforced with fiberglass construction do not by themselves change dimensional compatibility. Caveats: - MILâCâ27487 covers a range of sizes; confirm the cap is the correct nominal size for your coupling (e.g., 1", 1Â½", 2", etc.). - Some manufacturers produce parts "to the MIL spec" but with minor tolerance or finishing differences; verify fit on a sample or check manufacturer crossâreference. - For critical or highâpressure applications, confirm the working pressure rating for the specific size to ensure safe use. Recommendation: Match the nominal size and, if possible, confirm with the supplier/manufacturer that the specific CAMLOCK DP socket cap size is intended for the exact MILâCâ27487 coupling you have.

CAMLOCK DP socket cap, polypropylene

Additional information

Material	P – material (plastic)

End cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on coupling size. Material: polypropylene reinforced with fiberglass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-DP-075-P	CAMLOCK connector DP 3/4" polypropylene	-	7	In stock	Enquiry
AC-DP-075-PX	CAMLOCK DP 3/4" polypropylene connector	-	7	In stock	Enquiry
AC-DP-100-P	CAMLOCK DP 1" polypropylene connector	-	7	In stock	Enquiry
AC-DP-100-PX	CAMLOCK DP 1" polypropylene connector	-	7	In stock	Enquiry
AC-DP-125-P	CAMLOCK connector DP 1.1/4", polypropylene	-	7	In stock	Enquiry
AC-DP-125-PX	CAMLOCK connector DP 1.1/4", polypropylene	-	7	In stock	Enquiry
AC-DP-150-P	CAMLOCK connector DP 1.1/2" polypropylene	-	7	In stock	Enquiry
AC-DP-150-PX	CAMLOCK connector DP 1.1/2" polypropylene	-	7	In stock	Enquiry
AC-DP-200-P	CAMLOCK DP 2" polypropylene connector	-	7	In stock	Enquiry
AC-DP-200-PX	CAMLOCK DP 2" polypropylene connector	-	7	In stock	Enquiry
AC-DP-300-P	CAMLOCK DP 3" polypropylene connector	-	4	In stock	Enquiry
AC-DP-300-PX	CAMLOCK DP 3" polypropylene connector	-	4	In stock	Enquiry
AC-DP-400-P	CAMLOCK DP 4" polypropylene connector	-	4	In stock	Enquiry
AC-DP-400-PX	CAMLOCK DP 4" connector, polypropylene	-		In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on coupling size. Material: polypropylene reinforced with fiberglass.