Can the CEJN 116 quick connect socket with GW with valve, hardened steel be fitted with a safety ring to prevent accidental disconnection?

Yes. The CEJN 116 quick connect socket with GW with valve, hardened steel can be fitted with a safety ring to prevent accidental disconnection. The socket is optionally available with a safety ring and is otherwise supplied standard with a protective cap.

Is the CEJN 116 quick connect socket with GW with valve, hardened steel suitable for use in rescue equipment at 1500 bar working pressure?

Yes. The CEJN 116 quick connect socket with GW with valve, hardened steel is suitable for rescue equipment at 1500 bar working pressure. It is specifically designed for very high-pressure hydraulic installations and listed uses include rescue equipment. Key specs: working pressure 1500 bar (connected coupling), burst pressure 3000 bar, hardened galvanized steel, NBR seals, flow 6 l/min (Îp = 4 bar), nominal diameter 2.5 mm, operating temperature â30Â°C to +100Â°C. Optional safety ring prevents accidental disconnection and a protective cap is supplied. Ensure compatibility with the mating coupling and follow applicable safety standards and maintenance procedures.

Does the CEJN 116 quick connect socket with GW with valve, hardened steel include a protective contamination cap?

Yes. The CEJN 116 quick connect socket with GW with valve, hardened steel is supplied standard with a cap for protection against contamination.

CEJN 116 quick connect socket with GW with valve, hardened steel

All products, UHP quick couplings/

Additional information

Material	CS – steel (cast iron)

CEJN 116 quick coupling socket with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be equipped with a safety ring to prevent accidental disconnection. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-HP-101161201	CEJN 116 GW 1/8" BSP socket	-	1500	In stock	Enquiry
CJ-HP-101161202	CEJN 116 GW 1/4" BSP socket	-	1500	In stock	Enquiry
CJ-HP-101161402	CEJN 116 GW 1/4" NPT socket	-	1500	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CEJN 116 quick coupling socket with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be equipped with a safety ring to prevent accidental disconnection. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.