What Collet L-type in AISI 316 steel fits when hose Dw and Dz vary and sleeve length L must not exceed end tail Lk?

To select the correct Collet, AISI 316 steel, type L Format for crimping hydraulic type Z ends, follow these rules: - Match the sleeve internal diameter D2 to the hose internal diameter Dw (D2 â Dw). - Ensure the sleeve external diameter D1 fits the hose external diameter Dz (D1 â Dz). - Verify the locking diameter D3 corresponds to the mating endâs locking feature (D3 must match the end's lock spec). - Confirm sleeve length L â¤ tail length Lk of the end; if L > Lk choose a shorter sleeve variant. - Material requirement: Collet, AISI 316 steel, type L Format. Practical steps: 1. Measure Dw (internal) and Dz (external) of the hose precisely. 2. From the Collet, AISI 316 steel, type L Format datasheet/database pick the model whose D2 equals Dw and whose D1 equals Dz. 3. Check that the modelâs D3 matches the endâs locking diameter. 4. Ensure the modelâs L is not greater than Lk; if it is, select next shorter L variant. If you provide specific Dw, Dz and Lk values I will pick the exact Collet, AISI 316 steel, type L Format dimensions.

Which Collet L-type in AISI 316 steel matches hose Dw/Dz when sleeve L â¤ end tail Lk?

Collet L, AISI 316 steel, type L Format that matches when sleeve L â¤ tail Lk is selected by matching hose internal diameter Dw to D2 and hose external diameter Dz to D1, ensuring D3 (locking diameter) fits the mating end. Choose the Collet with: - D2 = Dw (internal diameter match) - D1 â¥ Dz (external diameter equal or slightly larger to allow crimp) - Verify D3 equals locking diameter required by the hydraulic Z-type end - Confirm sleeve length L does not exceed tail length Lk Example selection rule: pick the Collet L with D2 exactly Dw and D1 closest â¥ Dz, made of AISI 316 steel, type L Format, and with D3 specified for the end; ensure L â¤ Lk before crimping.

Which Collet L-type in AISI 316 steel fits hoses when Dw and Dz vary and L â¤ Lk?

To select the correct Collet, AISI 316 steel, type L Format for crimping hydraulic type Z ends, match the sleeve dimensions to the hose dimensions and tail length as follows: - Ensure sleeve internal diameter D2 â¥ hose internal diameter Dw and sleeve external diameter D1 â¤ hose external diameter Dz to allow proper fit over the hose (Dw â¤ D2 and D1 â¤ Dz). - Confirm locking diameter D3 corresponds to the mating end so the collet will engage securely. - Verify sleeve length L does not exceed the tail length Lk (L â¤ Lk). Example selection steps: 1. Measure hose inner diameter Dw and outer diameter Dz. 2. From the Collet, AISI 316 steel, type L Format catalogue, find sleeves where D2 is equal to or slightly greater than Dw and D1 is equal to or slightly less than Dz. 3. Check D3 for compatibility with the specific type Z end locking profile. 4. Confirm the sleeveâs length L is less than or equal to the end tail length Lk. If you provide specific Dw, Dz and Lk values, I will list the exact Collet, AISI 316 steel, type L Format part(s) that fit.

Collet, AISI 316 steel, type L

Additional information

Material	SS – stainless steel
Standard length [m]	2

L-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] – external diameter. Diameter D2 [mm] – internal diameter. Diameter D3 [mm] – locking diameter. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-L-15-04-SS316	L type bushing 15 mm x 1/4", AISI 316L	6	-	In stock	Enquiry
TI-L-17-05-SS316	L type bushing 17 mm x 5/16", AISI 316L	8	-	In stock	Enquiry
TI-L-22-08-SS316	L type bushing 22 mm x 1/2", AISI 316L	12	-	In stock	Enquiry
TI-L-24-08-SS316	L type bushing 24 mm x 1/2", AISI 316L	12	-	In stock	Enquiry
TI-L-28-10-SS316	L type bushing 28 mm x 5/8", AISI 316L	16	-	In stock	Enquiry
TI-L-30-10-SS316	L type bushing 30 mm x 5/8", AISI 316L	16	-	In stock	Enquiry
TI-L-30-12-SS316	L type bushing 30 mm x 3/4", AISI 316L	20	-	In stock	Enquiry
TI-L-33-12-SS316	L type bushing 33 mm x 3/4", AISI 316L	20	-	In stock	Enquiry
TI-L-37-16-SS316	L type bushing 37 mm x 1", AISI 316L	25	-	In stock	Enquiry
TI-L-39-16-SS316	Sleeve type L 39 mm x 1", AISI 316L	25	-	In stock	Enquiry
TI-L-45-20-SS316	L type bushing 45 mm x 1.1/4", AISI 316L	32	-	In stock	Enquiry
TI-L-48-20-SS316	Sleeve type L 48 mm x 1.1/4", AISI 316L	32	-	In stock	Enquiry
TI-L-52-24-SS316	Sleeve type L 52 mm x 1.1/2", AISI 316L	38	-	In stock	Enquiry
TI-L-54-24-SS316	L type bushing 54 mm x 1.1/2", AISI 316L	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

L-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] – external diameter. Diameter D2 [mm] – internal diameter. Diameter D3 [mm] – locking diameter. Material: AISI 316 steel.