Can RS shell bracket (EN 14420-3/DIN 2817), brass maintain a 25 bar rating with compatible EN 14420-3 hoses and fittings?

Yes - RS shell bracket (EN 14420-3/DIN 2817), brass can maintain a 25 bar rating when used with compatible EN 14420-3 hoses and fittings, provided the hose and end fittings are properly selected and rated for 25 bar. The clamp assembly (brass shells with galvanized carbon steel screws/nuts) is specified with a working pressure of 25 bar when matched with appropriate EN 14420-3 compliant hose and ends. Ensure correct hose size, material compatibility, correct assembly (secure flange engagement) and torque per manufacturer instructions to achieve the stated pressure rating.

Does RS shell bracket (EN 14420-3/DIN 2817), brass reliably hold 25 bar when paired with EN 14420-3 hoses?

Yes. RS shell bracket (EN 14420-3/DIN 2817), brass can reliably hold 25 bar when used with EN 14420-3 hoses, provided the following conditions are met: - The clamp is correctly the RS shell bracket (EN 14420-3/DIN 2817), brass as described (brass clamps; screws and nuts galvanized carbon steel). - The hose and hose end conform to EN 14420-3 and are rated for at least 25 bar working pressure. - Correct assembly: the clamp is fitted to a compatible smooth hose end with securing flange, tightened to the manufacturerâs recommended torque, and installed without damage, misalignment, or gaps. - Hose condition and assembly environment: hose and fitting are free of defects, compatible with the fluid and temperature, and not exposed to excessive mechanical loads, vibration, or axial pull beyond design limits. - Regular inspection and maintenance are performed to detect corrosion, loosening, or wear that could reduce holding capacity. If these criteria are satisfied, the specified working pressure of 25 bar is achievable and reliable.

RS shell bracket (EN 14420-3/DIN 2817), brass

Q: Is the RS shell bracket (EN 14420-3/DIN 2817), brass suitable for 25 bar working pressure when used with EN 14420-3 compatible hoses and fittings?

Yes . the RS shell bracket (EN 14420-3/DIN 2817), brass is suitable for 25 bar working pressure when used with EN 14420-3 compatible hoses and fittings, provided the hose and end fittings are correctly selected and rated for 25 bar. The product description explicitly states Working pressure 25 bar (with appropriately selected hose and end EN 14420-3). Note: the clamp body is brass while screws and nuts are galvanized carbon steel; ensure material compatibility (corrosion, galvanic effects) and that the complete assembly (hose, end, clamp, fasteners) is installed per manufacturer guidelines and applicable standards.

Additional information

Material	B – brass (bronze)

Shell clamp designed for securing hoses on standard ends (smooth) with a securing flange. Material: clamps – brass, screws and nuts – galvanized carbon steel. Working pressure 25 bar (with appropriately selected hose and end EN 14420-3).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RS-636013005030	Shell clamp according to DIN2817 13x5 mm, brass	-	-	In stock	Enquiry
RS-636019006030	Shell clamp according to DIN2817 19x6 mm, brass	-	-	In stock	Enquiry
RS-636025006030	Shell clamp according to DIN2817 25x6 mm, CuZn	-	-	In stock	Enquiry
RS-636025008030	Shell clamp according to DIN2817 25x8 mm, Ms	-	-	In stock	Enquiry
RS-636032006030	Shell clamp according to DIN2817 32x6 mm, brass	-	-	In stock	Enquiry
RS-636032008030	Shell clamp according to DIN2817 32x8 mm, brass	-	-	In stock	Enquiry
RS-636038007030	Shell clamp according to DIN2817 38x6.5 mm, brass	-	-	In stock	Enquiry
RS-636038008030	Shell clamp according to DIN2817 38x8 mm, Ms	-	-	In stock	Enquiry
RS-636038010030	Shell clamp according to DIN2817 38x10 mm, brass	-	-	In stock	Enquiry
RS-636040007030	Shell clamp according to DIN2817 40x7 mm, Ms	-	-	In stock	Enquiry
RS-636040010030	Shell clamp according to DIN2817 40x10 mm, Ms	-	-	In stock	Enquiry
RS-636050008030	Shell clamp according to DIN2817 50x8 mm, Ms	-	-	In stock	Enquiry
RS-636050010030	Shell clamp according to DIN2817 50x10 mm, brass	-	-	In stock	Enquiry
RS-636065007030	Shell clamp according to DIN2817 65x7 mm, Ms	-	-	In stock	Enquiry
RS-636075008030	Shell clamp according to DIN2817 75x8 mm, brass	-	-	In stock	Enquiry
RS-636075010030	Shell clamp according to DIN2817 75x10 mm, brass	-	-	In stock	Enquiry
RS-636080008030	Shell clamp according to DIN2817 80x8 mm, Ms	-	-	In stock	Enquiry
RS-637100008030	Shell clamp according to DIN2826/2817 100x8 mm, Ms	-	-	In stock	Enquiry
RS-637100010030	Shell clamp according to DIN2826/2817 100x10 mm, Ms	-	-	In stock	Enquiry
RS-637100012030	Shell clamp according to DIN2826/2817 100x12 mm, Ms	-	-	In stock	Enquiry
RS-637100014030	Shell clamp according to DIN2826/2817 100x14 mm, Ms	-	-	In stock	Enquiry
RS-637125010030	Shell clamp according to DIN2826/2817 125x10 mm, CuZn	-	-	In stock	Enquiry
RS-637125013030	Shell clamp according to DIN2826/2817 125x13 mm, Ms	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Shell clamp designed for securing hoses on standard ends (smooth) with a securing flange. Material: clamps – brass, screws and nuts – galvanized carbon steel. Working pressure 25 bar (with appropriately selected hose and end EN 14420-3).