Can the Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T be installed without machining and fit hoses with outer diameter D1, inner diameter D2 and locking diameter D3?

Yes . the Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T can be installed without machining and is designed to fit rubber hydraulic hoses of types 1SN (R1AT) or 2SN (R2AT). The sleeve accommodates hoses by matching the specified dimensions: Diameter D1 = outer diameter, Diameter D2 = inner diameter, and Diameter D3 = locking diameter. Ensure the hose dimensions you have correspond to these D1, D2 and D3 values; if they do, the ZF12T will install directly (no machining) and provide proper clamping.

Does the Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T require machining for installation?

Yes. The Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T does not require machining for installation. The product description for the ZF12T clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT) explicitly states: Installation - no machining.

Is the Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T compatible with hoses of specified D1, D2, D3 without modification?

Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T Format: Yes. the Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T is designed for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT) and is intended for installation without machining. Provided the hose outer diameter (D1), inner diameter (D2) and locking diameter (D3) match the corresponding nominal values specified for this ZF12T clamping sleeve, it will be compatible and installable without modification. If any of the three diameters differ from the specified ranges for ZF12T, modification or a different collet size will be required.

Collet for 1SN, 2SN hydraulic hoses, AISI 316L steel, type ZF12T

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel

ZF12T clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT). Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – locking diameter. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZF12T-04-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 1/4", AISI 316L	6	-	In stock	Enquiry
TI-ZF12T-05-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 5/16", AISI 316L	8	-	In stock	Enquiry
TI-ZF12T-06-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 3/8", AISI 316L	10	-	In stock	Enquiry
TI-ZF12T-08-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 1/2", AISI 316L	12	-	In stock	Enquiry
TI-ZF12T-10-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 5/8", AISI 316L	16	-	In stock	Enquiry
TI-ZF12T-12-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 3/4", AISI 316L	20	-	In stock	Enquiry
TI-ZF12T-16-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 1", AISI 316L	25	-	In stock	Enquiry
TI-ZF12T-20-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 1.1/4", AISI 316L	32	-	In stock	Enquiry
TI-ZF12T-24-SS	Sleeve for hose 1SN/2SN (R1AT/R2AT) 1.1/2", AISI 316L	38	-	In stock	Enquiry
TI-ZF12T-32-SS	Hose sleeve 1SN/2SN (R1AT/R2AT) 2", AISI 316L	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ZF12T clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT). Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – locking diameter. Material: AISI 316L steel.