Can the Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A be used only with the matching NON-SKIVE hydraulic fitting from the same supplier?

Yes. The Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A is designed specifically for use with the matching NON-SKIVE hydraulic fitting from the same supplier. The product description explicitly states: "Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier." This means the colletâs dimensions, surface finish and assembly method are matched to their NON-SKIVE fittings to ensure correct sealing, retention and hose performance. Using it with a different supplierâs fitting or a standard skive fitting can compromise joint integrity, cause leaks, reduce hose life, or create safety hazards. For reliable, safe assemblies, use the specified collet only with the corresponding NON-SKIVE fitting from the same supplier.

Is the Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A compatible only with NON-SKIVE fittings from the same supplier?

Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A Format is specified for use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Based on the product description, it is compatible exclusively with NON-SKIVE (non-skive) fittings provided by that supplier; it is not intended for use with other manufacturersâ fittings.

Does Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A require use with the supplier's NON-SKIVE fitting?

Yes. The Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A must be used with the supplierâs NON-SKIVE fitting. The product description explicitly states the NON-SKIVE clamp sleeve is to be used only with the appropriate NON-SKIVE hydraulic fitting from the same supplier, so compatibility and correct performance require matching the supplierâs NON-SKIVE fitting.

Collet for hydraulic hoses 4SP, 4SH, R13, R15, carbon steel, type N4A

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	2

NON-SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13, and R15. Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-N4A-12	NON SKIVE sleeve for hose 4SP/4SH/R13/R15 3/4"	20	-	In stock	Enquiry
TI-N4A-16	NON SKIVE sleeve for hose 4SP/4SH/R13/R15 1"	25	-	In stock	Enquiry
TI-N4A-20	NON SKIVE sleeve for hose 4SP/4SH 1.1/4"	32	-	In stock	Enquiry
TI-N4A-24	NON SKIVE sleeve for hose 4SP/4SH 1.1/2"	38	-	In stock	Enquiry
TI-N4A-32	NON SKIVE sleeve for hose 4SP/4SH 2"	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

NON-SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13, and R15. Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.