Does the Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 fit hoses with outer diameter D1 and inner diameter D2 specified for your application?

Yes . the Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 fits hoses that match the BPMT2âs specified diameters: Diameter D1 [mm] (outer diameter) and Diameter D2 [mm] (inner diameter). The clamping sleeve is designed for thermoplastic hoses within those exact D1/D2 dimensions and is made of galvanized carbon steel to provide proper grip and corrosion resistance. Ensure your hoseâs measured outer and inner diameters correspond to the BPMT2âs listed D1 and D2 values for correct fit and secure clamping.

Is the Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 compatible with hoses having specific D1 (outer) and D2 (inner) diameters?

Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 is compatible only with hoses whose outer diameter (D1) and inner diameter (D2) match the specified dimensions for that BPMT2 clamping sleeve. The sleeveâs listed D1 [mm] denotes the hose outer diameter range it accepts, and D2 [mm] denotes the hose inner diameter it accommodates. Use a hose with D1 and D2 equal to the BPMT2âs specified values (or within any tolerance given by the manufacturer); hoses with different D1 or D2 will not seat or seal properly and are not compatible.

Can the Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 accommodate hoses with particular D1 (outer) and D2 (inner) diameters?

Yes. The Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2 is specified by two diameters: Diameter D1 [mm]. the hose outer diameter (OD). and Diameter D2 [mm]. the hose inner diameter (ID). If you provide the hoseâs D1 and D2 values that match the BPMT2âs listed D1 and D2 dimensions, the collet will accommodate that hose. The part is manufactured from carbon steel, galvanized, so its fit and clamping performance depend on matching those specified D1 (outer) and D2 (inner) measurements. If your hose diameters differ from the BPMT2âs specified D1/D2, the collet will not be a correct fit.

Collet for MT2 thermoplastic hoses, carbon steel, type BPMT2

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

BPMT2 clamping sleeve for thermoplastic hoses type MT2. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-BPMT2-06	Thermoplastic hose sleeve MT2 3/8" (BP38R2)	10	-	In stock	Enquiry
ZC-BPMT2-08	Thermoplastic hose sleeve MT2 (BP12R2T)	12	-	In stock	Enquiry
ZC-BPMT2-10	Thermoplastic hose sleeve MT2 5/8" (BP58R2)	16	-	In stock	Enquiry
ZC-BPMT2-12	Thermoplastic hose sleeve MT2 3/4" (BP34R1T)	20	-	In stock	Enquiry
ZC-BPMT2-16	Thermoplastic hose sleeve MT2 1" (BP1R1T)	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

BPMT2 clamping sleeve for thermoplastic hoses type MT2. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Material: carbon steel, galvanized.