Is the Pipe/drain cleaning hose, KUKA 250 suitable for continuous use at 250 bar and temperatures between -40Â°C and +70Â°C?

Based on the provided description, the Pipe/drain cleaning hose, KUKA 250 is specified with a working pressure of 250 bar and an operating temperature range from -40Â°C to +70Â°C. That indicates it is designed to operate at 250 bar and within that temperature band. However, whether it is suitable for continuous use at 250 bar depends on intended duty cycle and safety margins: - The stated "working pressure: 250 bar" is the maximum recommended operating pressure; continuous operation at the rated working pressure is generally allowed if the manufacturer confirms it, but industry best practice often recommends some safety margin below the maximum working pressure for continuous or long-term use. - The hose construction (double textile braid reinforcement, synthetic rubber inner and outer layers) and compliance with EN ISO 1307 support suitability for high-pressure washing and flushing, and the stated temperature range (-40Â°C to +70Â°C) covers the temperatures you specified. - For continuous high-pressure service, confirm fatigue and burst pressure ratings, recommended safety factor, and manufacturer guidance about continuous-duty use at the maximum working pressure. Conclusion: The Pipe/drain cleaning hose, KUKA 250 is specified for 250 bar and -40Â°C to +70Â°C, suggesting it can operate under those conditions. For continuous use at 250 bar, verify with the manufacturer or technical datasheet to confirm continuous-duty approval and safety margins.

Can Pipe/drain cleaning hose, KUKA 250 be used with oil-mist environments and resist abrasion during regular high-pressure cleaning?

Yes. Pipe/drain cleaning hose, KUKA 250 is designed for high-pressure washing (working pressure 250 bar) of sewage systems and its outer layer is specifically resistant to abrasion, oil mist, and weather conditions. Constructed with a smooth synthetic rubber inner and outer layer plus double textile braid reinforcement, it will withstand regular high-pressure cleaning and exposure to oil-mist environments within its operating temperature range (-40Â°C to +70Â°C). Ensure you do not exceed the specified working pressure or temperature limits for safe, long-lasting performance.

Does Pipe/drain cleaning hose, KUKA 250 comply with EN ISO 1307 standards for sewage flushing?

Yes. Pipe/drain cleaning hose, KUKA 250 complies with EN ISO 1307 for sewage flushing. Justification: the product description explicitly states it is "Manufactured according to standard EN ISO 1307." Its construction and specifications. inner smooth synthetic rubber, double textile braid reinforcement, abrasion- and oil-/weather-resistant outer layer, working pressure 250 bar, and temperature range â40Â°C to +70Â°C. are consistent with requirements for high-pressure hoses used in sewage flushing as covered by EN ISO 1307.

Hose for cleaning pipes/sewers, KUKA 250

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	120, 80

Hose delivery intended for high-pressure washing and flushing systems sewer. Layer outer resistant to abrasion, mist oil and conditions atmospheric. produced in accordance with the standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: od -40°C up to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SL-KUKA250-13	Hose KUKA 250 12.7x25 mm, 250 bar	12	250	In stock	Enquiry
SL-KUKA250-16	Hose KUKA 250 16x28 mm, 250 bar	16	250	In stock	Enquiry
SL-KUKA250-19	Hose KUKA 250 19x31.6 mm, 250 bar	20	250	In stock	Enquiry
SL-KUKA250-25	Hose KUKA 250 25.4x39.3 mm, 250 bar	25	250	In stock	Enquiry
SL-KUKA250-32	Hose KUKA 250 31.8x48 mm, 250 bar	32	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose delivery intended for high-pressure washing and flushing systems sewer. Layer outer resistant to abrasion, mist oil and conditions atmospheric. produced in accordance with the standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: od -40°C up to +70°C.

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	120, 80