Can the Compact actuator ISO 15552 CMPC series with a piston rod with external thread (Ã 32 Ã· 100) be fitted with magnetic sensors using the profile grooves without extra accessories?

Yes. The Compact actuator ISO 15552 CMPC series with a piston rod with external thread, fi 32 Ã· 100, is equipped with a magnet embedded in the piston and features profile grooves that allow the use of magnetic sensors without additional accessories. The special profile and grooves provide direct mounting points for sensors, enabling straightforward installation and position sensing.

How does the Compact actuator ISO 15552 CMPC series, piston rod with external thread, fi 32 Ã· 100, ensure axial stiffness for varied mounting options?

The Compact actuator ISO 15552, piston rod with external thread, fi 32 Ã· 100, CMPC series ensures axial stiffness for varied mounting options through its specially designed profile rigidly connected to the outer covers by screws. This screw-fixed profileâcover assembly creates a stiff structural core that resists axial loads and moments, allowing secure mounting in confined or challenging positions. The compact, short design combined with robust connection points increases mounting flexibility without compromising stiffness. Additionally, material choices for the piston rod (C45 chrome-plated steel or stainless steel) and adherence to ISO 15552 tolerances further contribute to reliable axial rigidity across the Ã32âÃ100 range.

What are the recommended maintenance intervals for Compact actuator ISO 15552, piston rod with external thread, fi 32 Ã· 100, CMPC series?

Compact actuator ISO 15552, piston rod with external thread, fi 32 Ã· 100, CMPC series. Recommended maintenance intervals 1. Daily / Before use - Visual inspection of actuator body, piston rod and mounting for damage, leaks or misalignment. - Check for smooth rod travel and unusual noises. - Verify sensors/magnets seating and cable/connectors if fitted. 2. Weekly - Inspect external thread and rod chrome/plating for corrosion or wear. - Check mounting screws and cover fastenings for tightness. 3. Monthly - Check pneumatic connections, tubing and fittings for leaks; replace worn seals or tubing. - Verify operating pressure and temperature remain within specified range (-10Â°C to +80Â°C, min. 0.4â0.6 bar depending on diameter; max. up to 10 bar). - Inspect guide/profile grooves for debris; clean to maintain sensor fit and rod movement. 4. Every 6 months - Perform function test under load to confirm stroke, speed and repeatability. - Inspect end-of-stroke cushioning and bumpers; adjust or replace if worn. - Check axial stiffness by verifying mounting integrity and screw torque on profile-to-cover joints. 5. Annually (or every 1â2 million cycles, whichever sooner) - Replace internal seals and wear rings as preventive maintenance. - Inspect piston magnet and internal components (requires disassembly) for wear, corrosion or deformation; clean and replace parts as needed. - For stainless vs C45 chrome-plated rods, assess surface condition and reapply corrosion protection or replace rod if pitting or scoring present. 6. As-needed / Condition-based - Immediately service if leaks, excessive play, sticking, visible rod damage, or performance degradation occur. - In harsh environments (dust, moisture, chemicals) increase inspection frequency to monthly or per shift as required. Notes - Adjust intervals based on duty cycle, load, environment and cycle frequency. High-cycle or heavy-load applications require more frequent checks. - Use replacement parts compliant with ISO 15552 to ensure interchangeability and proper fit.

Actuator A compact ISO 15552, piston rod with a thread external, fi 32 ÷ 100, series CMPC

All products, Pneumatic actuators/

Additional information

Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-10

Actuator A compact series CMPC, with piston rod with a thread external, features small weight and short installation, co allows ich installing in hard reachable places. The special actuator profile is connected to the external covers by means of screws, which ensures its optimal axial rigidity and increases the variety of ways of its mounting. W equipped is in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows na easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal pressure working: 0.4 ÷ 0.6 bar, depending on diameter. maximum pressure working: up to 10 bar. Operating temperature: from -10°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2500320015XP	Actuator CMPC ISO 6431 32-0015	-	10	In stock	Enquiry
MW-2500320020XP	Actuator CMPC ISO 6431 32-0020	-	10	In stock	Enquiry
MW-2500320025CP	Actuator CMPC ISO 6431 32-0025	-	10	In stock	Enquiry
MW-2500320025XP	Actuator CMPC ISO 6431 32-0025	-	10	In stock	Enquiry
MW-2500320040CP	Actuator CMPC ISO 6431 32-0040	-	10	In stock	Enquiry
MW-2500320050CP	Actuator CMPC ISO 6431 32-0050	-	10	In stock	Enquiry
MW-2500320080XP	Actuator CMPC ISO 6431 32-0080	-	10	In stock	Enquiry
MW-2500320120CP	Actuator CMPC ISO 6431 32-0120	-	10	In stock	Enquiry
MW-2500320125CP	Actuator CMPC ISO 6431 32-0125	-	10	In stock	Enquiry
MW-2500320300CP	Actuator CMPC ISO 6431 32-0300	-	10	In stock	Enquiry
MW-2500400007CP	Actuator CMPC ISO 6432 40-0007	-	10	In stock	Enquiry
MW-2500400010CP	Actuator CMPC ISO 6431 40-0010	-	10	In stock	Enquiry
MW-2500400025CP	Actuator CMPC ISO 6431 40-0025	-	10	In stock	Enquiry
MW-2500400035CP	Actuator CMPC ISO 6431 40-0035	-	10	In stock	Enquiry
MW-2500400040CP	Actuator CMPC ISO 6431 40-0040	-	10	In stock	Enquiry
MW-2500400050CP	Actuator CMPC ISO 6431 40-0050	-	10	In stock	Enquiry
MW-2500400080CP	Actuator CMPC ISO 6431 40-0080	-	10	In stock	Enquiry
MW-2500400150CP	Actuator CMPC ISO 6431 40-0150	-	10	In stock	Enquiry
MW-2500400200CP	Actuator CMPC ISO 6431 40-0200	-	10	In stock	Enquiry
MW-2500500025CP	Actuator CMPC ISO 6431 50-0025	-	10	In stock	Enquiry
MW-2500500030CP	Actuator CMPC ISO 6431 50-0030	-	10	In stock	Enquiry
MW-2500500040CP	Actuator CMPC ISO 6431 50-0040	-	10	In stock	Enquiry
MW-2500500045CP	Actuator CMPC ISO 6431 50-0045	-	10	In stock	Enquiry
MW-2500500060CP	Actuator CMPC ISO 6431 50-0060	-	10	In stock	Enquiry
MW-2500500150CP	Actuator CMPC ISO 6431 50-0150	-	10	In stock	Enquiry
MW-2500630010CP	Actuator CMPC ISO 6431 63-0010	-	10	In stock	Enquiry
MW-2500630025CP	Actuator CMPC ISO 6431 63-0025	-	10	In stock	Enquiry
MW-2500630050CP	Actuator CMPC ISO 6431 63-0050	-	10	In stock	Enquiry
MW-2500630060CP	Actuator CMPC ISO 6431 63-0060	-	10	In stock	Enquiry
MW-2500630080XP	Actuator CMPC ISO 6431 63-0080	-	10	In stock	Enquiry
MW-2500630100CP	Actuator CMPC ISO 6431 63-0100	-	10	In stock	Enquiry
MW-2500630220CP	Actuator CMPC ISO 6431 63-0220	-	10	In stock	Enquiry
MW-2500630345CP	Actuator CMPC ISO 6431 63-0345	-	10	In stock	Enquiry
MW-2500800010CP	Actuator CMPC ISO 6431 80-0010	-	10	In stock	Enquiry
MW-2500800040CP	Actuator CMPC ISO 6431 80-0040	-	10	In stock	Enquiry
MW-2500800050CP	Actuator CMPC ISO 6431 80-0050	-	10	In stock	Enquiry
MW-2500800060CP	Actuator CMPC ISO 6431 80-0060	-	10	In stock	Enquiry
MW-2500800100CP	Actuator CMPC ISO 6431 80-0100	-	10	In stock	Enquiry
MW-2500800100XP	Actuator CMPC ISO 6431 80-0100	-	10	In stock	Enquiry
MW-2500800150CP	Actuator CMPC ISO 6431 80-0150	-	10	In stock	Enquiry
MW-2501000007CP	Actuator CMPC ISO 6431 100-0007	-	10	In stock	Enquiry
MW-2501000017CP	Actuator CMPC ISO 6431 100-0017	-	10	In stock	Enquiry
MW-2501000040CP	Actuator CMPC ISO 6431 100-0040	-	10	In stock	Enquiry
MW-2501000050CP	Actuator CMPC ISO 6431 100-0050	-	10	In stock	Enquiry
MW-2501000100CP	Actuator CMPC ISO 6431 100-0100	-	10	In stock	Enquiry
MW-2501000200CP	Actuator CMPC ISO 6431 100-0200	-	10	In stock	Enquiry
MW-2511000050CP	Actuator CMPC ISO 100-0050	-	10	In stock	Enquiry
MW-2530400015CP	Actuator CMPC ISO 40-0015	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Actuator A compact series CMPC, with piston rod with a thread external, features small weight and short installation, co allows ich installing in hard reachable places. The special actuator profile is connected to the external covers by means of screws, which ensures its optimal axial rigidity and increases the variety of ways of its mounting. W equipped is in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows na easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal pressure working: 0.4 ÷ 0.6 bar, depending on diameter. maximum pressure working: up to 10 bar. Operating temperature: from -10°C to +80°C.