Is the Compressed air filter with reducer (filterreducer) FR, BIT series compatible with upstream pressures above 13 bar or limited to supply pressure up to 13 bar?

The Compressed air filter with reducer (filterreducer) FR, BIT series is specified with a maximum supply pressure of up to 13 bar. Therefore it is limited to upstream pressures â¤13 bar and is not rated for continuous use with upstream pressures above 13 bar. Using it with supply pressures higher than 13 bar would exceed the declared specification and is not recommended for safety and performance reasons.

Can the Compressed air filter with reducer (filterreducer) FR, BIT series be installed inline with high-temperature compressed air sources?

No. The Compressed air filter with reducer (filterreducer) FR, BIT series has a maximum operating temperature of +50Â°C, so it should not be installed inline with high-temperature compressed air sources that exceed this limit. Installing it in contact with air hotter than +50Â°C risks damage to the shaped membrane, seals and internal components, impaired regulation/filtration performance and shortened service life. If your process uses temperatures above +50Â°C, cool the air (aftercooler/intermediate piping) or select a regulator/filter rated for higher temperatures.

Does the Compressed air filter with reducer (filterreducer) FR, BIT series require specific mounting orientation for proper condensate drainage?

Compressed air filter with reducer (filterreducer) FR, BIT series does require correct mounting orientation to ensure proper condensate drainage. Install the unit vertically with the bowl (condensate chamber) pointing downward so condensate can collect and be discharged by the selected drain type (manual, semi-automatic RMSA, or automatic SAC). Avoid mounting the filter horizontally or upside down, as this impairs separation and drainage performance and may reduce filter life or cause malfunction. Also ensure sufficient clearance below the drain for operation and servicing and fit the unit close to the actuating devices or decentralized system as recommended.

Compressed air filter with reducer (filterreducer) FR, BIT series

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50
Standard length [m]	6

Filter with pressure regulator series BIT with shaped membrane, recommended for decentralized compressed air systems or in direct proximity to actuating devices. Size: 1/8″, 1/4″. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: G 1/8″ BSP, G 1/4″ BSP. Manometer connection: G 1/8″ BSP. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min – 1/8″, 1/4″ (at input pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-5105001	Filter - reducer FR BIT 1/8 5 02 RMSA	-	-	In stock	Enquiry
MW-5105002	Filter - reducer FR BIT 1/8 20 02 RMSA	-	-	In stock	Enquiry
MW-5105003	Filter - reducer FR BIT 1/8 50 02 RMSA	-	-	In stock	Enquiry
MW-5105004	Filter - reducer FR BIT 1/8 5 04 RMSA	-	-	In stock	Enquiry
MW-5105005	Filter - reducer FR BIT 1/8 20 04 RMSA	-	-	In stock	Enquiry
MW-5105006	Filter - reducer FR BIT 1/8 50 04 RMSA	-	-	In stock	Enquiry
MW-5105007	Filter - reducer FR BIT 1/8 5 08 RMSA	-	-	In stock	Enquiry
MW-5105008	Filter - reducer FR BIT 1/8 20 08 RMSA	-	-	In stock	Enquiry
MW-5105009	Filter - reducer FR BIT 1/8 50 08 RMSA	-	-	In stock	Enquiry
MW-5105010	Filter - reducer FR BIT 1/8 5 012 RMSA	-	-	In stock	Enquiry
MW-5105011	Filter - reducer FR BIT 1/8 20 012 RMSA	-	-	In stock	Enquiry
MW-5105012	Filter - reducer FR BIT 1/8 50 012 RMSA	-	-	In stock	Enquiry
MW-5105013	Filter - reducer FR BIT 1/8 5 02 SAC	-	-	In stock	Enquiry
MW-5105014	Filter - reducer FR BIT 1/8 20 02 SAC	-	-	In stock	Enquiry
MW-5105015	Filter - reducer FR BIT 1/8 50 02 SAC	-	-	In stock	Enquiry
MW-5105016	Filter - reducer FR BIT 1/8 5 04 SAC	-	-	In stock	Enquiry
MW-5105017	Filter - reducer FR BIT 1/8 20 04 SAC	-	-	In stock	Enquiry
MW-5105018	Filter - reducer FR BIT 1/8 50 04 SAC	-	-	In stock	Enquiry
MW-5105019	Filter - reducer FR BIT 1/8 5 08 SAC	-	-	In stock	Enquiry
MW-5105020	Filter - reducer FR BIT 1/8 20 08 SAC	-	-	In stock	Enquiry
MW-5105021	Filter - reducer FR BIT 1/8 50 08 SAC	-	-	In stock	Enquiry
MW-5105022	Filter - reducer FR BIT 1/8 5 012 SAC	-	-	In stock	Enquiry
MW-5105023	Filter - reducer FR BIT 1/8 20 012 SAC	-	-	In stock	Enquiry
MW-5105024	Filter - reducer FR BIT 1/8 50 012 SAC	-	-	In stock	Enquiry
MW-5205001	Filter - reducer FR BIT 1/4 5 02 RMSA	-	-	In stock	Enquiry
MW-5205002	Filter - reducer FR BIT 1/4 20 02 RMSA	-	-	In stock	Enquiry
MW-5205003	Filter - reducer FR BIT 1/4 50 02 RMSA	-	-	In stock	Enquiry
MW-5205004	Filter - reducer FR BIT 1/4 5 04 RMSA	-	-	In stock	Enquiry
MW-5205005	Filter - reducer FR BIT 1/4 20 04 RMSA	-	-	In stock	Enquiry
MW-5205006	Filter - reducer FR BIT 1/4 50 04 RMSA	-	-	In stock	Enquiry
MW-5205007	Filter - reducer FR BIT 1/4 5 08 RMSA	-	-	In stock	Enquiry
MW-5205008	Filter - reducer FR BIT 1/4 20 08 RMSA	-	-	In stock	Enquiry
MW-5205009	Filter - reducer FR BIT 1/4 50 08 RMSA	-	-	In stock	Enquiry
MW-5205010	Filter - reducer FR BIT 1/4 5 012 RMSA	-	-	In stock	Enquiry
MW-5205011	Filter - reducer FR BIT 1/4 20 012 RMSA	-	-	In stock	Enquiry
MW-5205012	Filter - reducer FR BIT 1/4 50 012 RMSA	-	-	In stock	Enquiry
MW-5205013	Filter - reducer FR BIT 1/4 5 02 SAC	-	-	In stock	Enquiry
MW-5205014	Filter - reducer FR BIT 1/4 20 02 SAC	-	-	In stock	Enquiry
MW-5205015	Filter - reducer FR BIT 1/4 50 02 SAC	-	-	In stock	Enquiry
MW-5205016	Filter - reducer FR BIT 1/4 5 04 SAC	-	-	In stock	Enquiry
MW-5205017	Filter - reducer FR BIT 1/4 20 04 SAC	-	-	In stock	Enquiry
MW-5205018	Filter - reducer FR BIT 1/4 50 04 SAC	-	-	In stock	Enquiry
MW-5205019	Filter - reducer FR BIT 1/4 5 08 SAC	-	-	In stock	Enquiry
MW-5205020	Filter - reducer FR BIT 1/4 20 08 SAC	-	-	In stock	Enquiry
MW-5205021	Filter - reducer FR BIT 1/4 50 08 SAC	-	-	In stock	Enquiry
MW-5205022	Filter - reducer FR BIT 1/4 5 012 SAC	-	-	In stock	Enquiry
MW-5205023	Filter - reducer FR BIT 1/4 20 012 SAC	-	-	In stock	Enquiry
MW-5205024	Filter - reducer FR BIT 1/4 50 012 SAC	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Filter with pressure regulator series BIT with shaped membrane, recommended for decentralized compressed air systems or in direct proximity to actuating devices. Size: 1/8″, 1/4″. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: G 1/8″ BSP, G 1/4″ BSP. Manometer connection: G 1/8″ BSP. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min – 1/8″, 1/4″ (at input pressure 6 bar Δp = 1 bar).