Is the Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON compatible with other 3/8" NPT fittings and adapters?

Yes. The Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON is compatible with other 3/8" NPT fittings and adapters. It features an external 3/8" NPT thread designed for standard low-pressure connections, so it will mate with standard 3/8" NPT male or female fittings and adapters. Keep in mind the hose and valve are rated for low-pressure applications (working pressure up to 3 bar) and are intended for air, water, oils and similar fluids; ensure any connected fittings, adapters and system components are also rated for the same thread type, pressure, fluid compatibility and temperature (up to +65Â°C) to maintain a secure, leak-free and safe connection.

Can the Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON withstand exposure to cutting oils and coolants at high temperatures?

Yes. The Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON is made of corrosion-, solvent-, oil- and grease-resistant acetal and is specifically designed for low-pressure transmission of air, water, oils and other substances used in cooling and metalworking. It is abrasion- and vibration-resistant, provides 100% position stability, and operates up to +65Â°C with working pressure up to 3 bar-making it suitable for exposure to cutting oils and coolants at elevated temperatures within those limits.

Does the Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON resist long-term UV exposure and outdoor use?

No. the Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON is not specified as UV-rated and therefore should not be relied on for long-term continuous outdoor UV exposure. Why: The product description specifies material as acetal (POM) with resistance to corrosion, solvents, oils, grease, abrasion and vibrations, plus good rigidity/elasticity and stability for lowâpressure cooling and metalworking fluids. However, it does not state UV (ultraviolet) or weather-resistance, nor outdoor/UV-stabilized additives. Acetal can degrade, discolor, become brittle or lose mechanical properties over prolonged UV exposure and outdoor weathering unless specifically formulated with UV stabilizers or protected by coverings. Practical recommendation: If you need long-term outdoor/UV exposure, consider using hoses explicitly rated for UV/weather resistance or protect the Coolant hose with nozzle and GZ NPT valve, 3/8" system, JETON by shielding it from direct sunlight (e.g., conduit, UVâprotective sleeve, paint/coating approved for acetal) and perform periodic inspections for brittleness, cracking or loss of flexibility.

Coolant hose with nozzle and GZ NPT valve, 3/8″ system, JETON

Air and water hoses, All products/

Additional information

Material	P – material (plastic)
Maximum operating temperature [°C]	65
Vacuum resistance	check

Coolant hose with nozzle and valve with external NPT thread in 3/8″ system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, ensuring rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, providing 100% position stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 16 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-63720	Pipe with GZ 3/8" NPT, L = 360 mm	8	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Coolant hose with nozzle and valve with external NPT thread in 3/8″ system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, ensuring rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, providing 100% position stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 16 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.