Is the Double bent lance with knob, inlet GZ M22x1.5, stainless steel compatible with 1/4" NPT outlets and safe at 280 bar and +150Â°C?

Yes. The Double bent lance with knob, inlet GZ M22x1.5, stainless steel is specified with an outlet of GW 1/4" NPT, so it is compatible with 1/4" NPT outlets. Its rated working pressure is up to 280 bar and the operating temperature is up to +150Â°C, so when used within those specified limits it is safe for 280 bar and +150Â°C. Ensure proper thread sealing and correct matching fittings/materials, and verify installation and system components also meet these ratings before use.

Can the Double bent lance with knob, inlet GZ M22x1.5, stainless steel handle 40 l/min at 280 bar without leaks?

Yes - the Double bent lance with knob, inlet GZ M22x1.5, stainless steel is specified for a working pressure up to 280 bar and a flow rate of 40 l/min. Made of stainless steel and rated to +150Â°C, it is designed for highâpressure washer use with the stated inlet (GZ M22x1.5) and outlet (GW 1/4" NPT) connections. If properly installed with compatible fittings, correctly tightened threads, and intact seals, it should operate at 280 bar / 40 l/min without leaks. Ensure thread sealant or appropriate sealing washers are used per manufacturer recommendations and inspect Oârings/seals for wear before use.

Can the Double bent lance with knob, inlet GZ M22x1.5, stainless steel handle be used with 1/8" or 1/4" diameters at 40 l/min?

Yes. the Double bent lance with knob, inlet GZ M22x1.5, stainless steel can be used with either the 1/8" or 1/4" diameter option at a flow rate of 40 l/min. The product specification explicitly lists both diameters (1/8" and 1/4") as available and states a maximum working pressure up to 280 bar and a flow rate of 40 l/min, so the lance is designed to handle that flow within its pressure and temperature ratings (up to +150Â°C). Notes for safe use: - Ensure inlet/outlet fittings and your high-pressure washer connections match the lance threads (inlet GZ M22x1.5, outlet GW 1/4" NPT) or use appropriate adapters rated for the operating pressure. - Verify the pump can supply 40 l/min at the intended operating pressure and that hoses/valves/nozzles are rated for 280 bar. - For best performance, choose the diameter that matches your nozzle and system requirements: 1/4" will have lower internal restriction than 1/8", affecting pressure loss and spray characteristics.

Double bent lance with knob, inlet GZ M22x1.5, stainless steel

All products, Guns for high-pressure washers/

Additional information

Double bent lance with a knob designed for a high-pressure washer. Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4″ NPT. Available in diameters of 1/8″ and 1/4″. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry
MH-140040	Double lance 1/4", 600 mm, with handle, stainless steel	-	280

Double bent lance with a knob designed for a high-pressure washer. Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4″ NPT. Available in diameters of 1/8″ and 1/4″. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.