Is the External cutting mandrel, type FSE compatible with the FINN POWER FS50 tool holder for hose sizes from 3/16" to 2"?

Yes. The External cutting mandrel, type FSE is compatible with the FINN POWER FS50 tool holder for hose sizes from 3/16" to 2". The FSE mandrel is specifically designed for machining the outer layer of hydraulic hoses and is stated to be compatible with the FS50 tool holder, and it is available in sizes covering the 3/16" to 2" range.

Can External cutting mandrel, type FSE be used with FINN POWER FS50 tool holder for hoses sized 3/16"â2"?

Yes. External cutting mandrel, type FSE can be used with the FINN POWER FS50 tool holder for hoses sized 3/16"â2". The FSE mandrel is specifically designed for machining the outer layer of hydraulic hoses and is stated to be compatible with the FINN POWER FS50 tool holder, available in sizes from 3/16" to 2".

Can External cutting mandrel, type FSE accommodate hose outer layers for 3/16" to 2" when fitted to FINN POWER FS50?

Yes. External cutting mandrel, type FSE can accommodate hose outer layers from 3/16" to 2" when fitted to FINN POWER FS50. The FSE mandrel is designed for machining the outer layer of hydraulic hoses, is compatible with the FINN POWER FS50 tool holder, and is available in sizes covering the 3/16"â2" range.

External cutting mandrel, type FSE

Additional information

Material	CS – steel (cast iron)
Standard length [m]	60

FSE type mandrel used for machining the outer layer of hydraulic hoses that can be machined. Compatible with the tool holder of the FINN POWER FS50 device. Available in sizes: from 3/16″ to 2″.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
FP-FSE-03	External cutting tool 3/16"	-	-
FP-FSE-04	1/4" external cutting tool	-	-
FP-FSE-05	External cutting tool 5/16"	-	-
FP-FSE-06	3/8" external cutting tool	-	-
FP-FSE-08	External cutting tool 1/2"	-	-
FP-FSE-10	External cutting tool 5/8"	-	-
FP-FSE-12	External cutting tool 3/4"	-	-
FP-FSE-16	External cutting pin 1"	-	-
FP-FSE-20	External cutting tool 1.1/4"	-	-
FP-FSE-24	External cutting tool 1.1/2"	-	-
FP-FSE-32	External cutting tool 2"	-	-

FSE type mandrel used for machining the outer layer of hydraulic hoses that can be machined. Compatible with the tool holder of the FINN POWER FS50 device. Available in sizes: from 3/16″ to 2″.