Is the Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white safe to use at maximum working pressure of 6 bar and operating temperature up to +40Â°C?

Yes. The Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white Format is safe to use at a maximum working pressure of 6 bar and an operating temperature up to +40Â°C, because those values match the productâs specified limits (Maximum working pressure: 6 bar; Maximum operating temperature: +40Â°C). Use within these parameters ensures the set operates as intended. Follow manufacturer instructions for assembly, chemical compatibility, regular inspection for wear or damage, and safe handling to maintain safety during use.

Can the Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white be used with different cleaning agents safely?

Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white Format can be used with different cleaning agents, but with precautions. The tank has a foam injector and dosing nozzle designed for liquid detergents; compatible liquids should be nonâcorrosive and stable at up to +40Â°C. Do not use highly acidic, strongly alkaline, solventâbased or abrasive chemicals that can damage seals, injector or dosing parts. Maximum working pressure is 6 bar-do not exceed it. After each use flush thoroughly with clean water to remove residues and prevent chemical attack or clogging. If unsure, check the cleanerâs material compatibility with plastics/rubber and test a small amount first.

How do I assemble the Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white for use?

How to assemble and use the Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white 1. Safety first - Ensure the pressure source does not exceed 6 bar and water temperature is â¤ +40Â°C. - Wear protective gloves and goggles. 2. Inspect components - Confirm you have: NiTO I COMBI gun (NT-53105A1) with foam injector, 17 cm lance with washing nozzle, 1.4 l tank white, suction hose, and dosing nozzle set. 3. Attach lance to gun - Align the lanceâs connector with the gun outlet. - Push and twist (or screw) until secure and leak-free. 4. Install suction hose and dosing nozzle - Insert one end of the suction hose into the tank inlet. - Fit the correct dosing nozzle from the set onto the suction hose end according to desired dilution (check nozzle markings). - Ensure the connection between hose and nozzle is tight. 5. Mount tank on gun - Attach the tank to the gunâs foam injector inlet. Push and/or screw until it sits firmly and seals. 6. Fill tank - Unscrew tank cap and pour cleaning agent or mixture into the 1.4 l tank. Use recommended dilution for your detergent and the selected dosing nozzle. - Replace and tighten the cap. 7. Connect to water supply - Connect the gun to the pressure washer or water source following the gunâs connection type. Ensure inlet fittings are tight. 8. Prime and test - Open water supply and gradually increase pressure, keeping â¤ 6 bar. - Trigger the gun to purge air and draw detergent through the suction hose. - Check for leaks at all connections. 9. Use modes - For foaming: set foam injector on the NiTO I COMBI gun; spray foam evenly. - For washing/rinsing: use the washing nozzle on the 17 cm lance; adjust spray as needed. 10. After use - Rinse the tank, suction hose, and dosing nozzle with clean water to avoid residue. - Store components dry and protected from freezing and temperatures above +40Â°C. Follow these steps to safely assemble and operate the Foaming and washing set: NiTO I COMBI gun + 17 cm lance + 1,4 l tank white.

A set for foam and rinsing: A gun NiTO I COMBI + lance 17 cm + A bowl 1.4 l white

Additional information

A set for foam and rinsing: A gun NITO I COMBI (NT-53105A1), A bowl na agent cleaning with injector for foam, a hose suction and set nozzles dosing, lance 17 cm with nozzle for rinsing. maximum pressure working: 6 bar. Maximum operating temperature: +40°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-57087A1	Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 1.4 l, white - set	-	6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A set for foam and rinsing: A gun NITO I COMBI (NT-53105A1), A bowl na agent cleaning with injector for foam, a hose suction and set nozzles dosing, lance 17 cm with nozzle for rinsing. maximum pressure working: 6 bar. Maximum operating temperature: +40°C.